Cover Image

Sliding contact bearings for service to 700 °C /

Bibliographic Details
Main Author:	Sliney, Harold E. (Author)
Corporate Author:	United States. National Aeronautics and Space Administration (sponsoring body.)
Format:	Government Document eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center, September 1996.
Series:	NASA technical memorandum ; 107307.
Subjects:	Composite materials. Bearings. Performance tests. Heat treatment. High temperature tests. Clearances. Coefficient of friction.
Online Access:	https://purl.fdlp.gov/GPO/gpo70072

Similar Items

A new test machine for measuring friction and wear in controlled atmospheres to 1200 ⁰C /
by: Sliney, Harold E.
Published: (1990)

Friction and wear characteristics of candidate foil bearing materials from 25 °C to 800 °C /
by: Laskowski, J. A., et al.
Published: (1996)

Thermomechanical testing techniques for high-temperature composites : TMF behavior of SiC(SCS-6)/Ti-15-3 /
by: Castelli, Michael G.
Published: (1990)

The effect of compositional tailoring on the thermal expansion and tribological properties of PS300 : a solid lubricant composite coating /
by: DellaCorte, Christopher, et al.
Published: (1996)

Friction and wear of unlubricated NiTiHf with nitriding surface treatments /
by: Stanford, Malcolm Keith, 1970-
Published: (2018)

Final report on (NAS8-36651) mechanisms of rolling contact spalling /
Published: (1987)

Final report on (NAS8-36651) mechanisms of rolling contact spalling /
Published: (1987)

Analysis of experimental shaft seal data for high-performance turbomachines--as for space shuttle main engines /
Published: (1985)

NASA PS400 : a new high temperature solid lubricant coating for high temperature wear applications /
by: DellaCorte, C.
Published: (2009)

Room temperature characterization of a magnetic bearing for turbomachinery /
Published: (2002)

Durability evaluation of selected solid lubricating films /
by: Miyoshi, Kazuhisa
Published: (2001)

The MillSOT--a spiral orbit tribometer on a milling machine /
by: Pepper, Stephen V., 1937-
Published: (2014)

Comparison between oil-mist and oil-jet lubrication of high-speed, small-bore, angular-contact ball bearings /
by: Pinel, Stanley I.
Published: (2001)

Comparison between oil-mist and oil-jet lubrication of high-speed, small-bore, angular-contact ball bearings /
by: Pinel, Stanley I., et al.
Published: (2001)

Recommended strain gage application procedures for various Langley Research Center balances and test articles /
by: Moore, Thomas C.
Published: (1997)

Performance of simple gas foil thrust bearings in air /
by: Bruckner, Robert J.
Published: (2012)

Refractory metal heat pipe life test : test plan and standard operating procedures /
by: Martin, J. J.
Published: (2010)

Current activities in standarization of high-temperature, low-cyle-fatigue testing techniques in the United States /
by: Verrilli, Michael J.
Published: (1990)

Effect of internal clearance on load distribution and life of radially loaded ball and roller bearings /
by: Oswald, Fred B.
Published: (2012)

The effect of composition on the surface finish of PS400 : a new high temperature solid lubricant coating /
Published: (2010)

Effects of long term exposures on PM disk superalloys /
by: Gabb, Timothy Paul, 1958-
Published: (2013)

Gear mesh loss-of-lubrication experiments and analytical simulation /
by: Handschuh, Robert F.
Published: (2011)

Measurement of gear tooth dynamic friction /
by: Rebbechi, Brian, et al.
Published: (1996)

The evaluation of a modified chrome oxide based high temperature solid lubricant coating for foil gas bearings /
by: DellaCorte, Christopher
Published: (1998)

Rolling-element fatigue testing and data analysis : a tutorial /
by: Vlcek, Brian L.
Published: (2011)

A new analysis tool assessment for rotordynamic modeling of gas foil bearings /
by: Howard, Samuel A.
Published: (2010)

Tribological evaluation of candidate gear materials operating under light loads in highly humid conditions /
by: DellaCorte, Christopher, et al.
Published: (2015)

Interference-fit life factors for roller bearings /
by: Oswald, Fred B.
Published: (2009)

Wave fluid film bearing tests for an aviation gearbox /
by: Dimofte, Florin
Published: (2000)

A systems approach to the solid lubrication of foil air bearings for oil-free turbomachinery /
by: DellaCorte, Christopher, et al.
Published: (2002)

A systems approach to the solid lubrication of foil air bearings for oil-free turbomachinery /
by: DellaCorte, Christopher
Published: (2002)

Experimental techniques for evaluating the effects of aging on impact and high strain rate properties of triaxial braided composite materials /
Published: (2010)

Testing, analysis, and code verification of aerodynamics and heat transfer related to turbomachinery : final report /
by: King, Paul I.
Published: (1991)

Stressed oxidation of C/SiC composites /
by: Halbig, Michael C., 1969-
Published: (1997)

Ten year operating test results and post-test analysis of a 1/10 segment stirling sodium heat pipe : phase III final report /
by: Rosenfeld, John H., et al.
Published: (2012)

Modeling of high-strain-rate deformation, fracture, and impact behavior of advanced gas turbine engine materials at low and elevated temperatures /
by: Shazly, Mostafa
Published: (2003)

Surface chemistry, friction, and wear properties of untreated and laser-annealed surfaces of pulsed-laser-deposited WS₂ coatings /
by: Miyoshi, Kazuhisa, et al.
Published: (1996)

Permanent magnetic bearing for spacecraft applications /
by: Morales, Wilfredo
Published: (2003)

Tribological properties of ceramic/Ti₃Al-Nb sliding couples for use as candidate seal materials to 700 ⁰C /
by: DellaCorte, Christopher
Published: (1990)

Performance testing of a high temperature linear alternator for Stirling convertors /
by: Metscher, Jonathan F., et al.
Published: (2016)