Solution of two-span continuous beams under live loads by use of nomographs /

Loading of the hull girder /
by: Moe, Johannes, 1926-
Published: (1971)

Guide to stability design criteria for metal structures /
Published: (2010)

Solution of two-span continuous beams under live loads by use of nomographs /
by: Jakkula, A. A. (Arne Arthur), 1904-
Published: (1941)

Influence lines for continuous beams ; part 3, Four span continuous beams, constant moment of inertia /
by: Boyer, Walter C.
Published: (1956)

Structure for architects : a case study in steel, wood, and reinforced concrete design /
by: Bedi, Ashwani, et al.
Published: (2020)

Influence lines for continuous beams /
by: Boyer, Walter C.
Published: (1958)

Elastic beams and frames /
by: Renton, J. D. (John Delgaty), 1935-
Published: (2002)

Two-span continuous beams with dead loads /
by: Jakkula, A. A. (Arne Arthur), 1904-
Published: (1941)

Coefficients for analysis of four span continuous beams of constant moment of inertia /
Published: (1966)

Ten-division influence lines for continuous beams /
by: Anger, Georg
Published: (1956)

Fundamentals of structural mechanics /
by: Hjelmstad, Keith D.
Published: (2005)

A review of benchmark problems for geometric nonlinear behaviour of 3D beams and shells /
by: Knowles, N. C.
Published: (1990)

Ultimate moments and shears in continuous reinforced concrete beams.
by: Ernst, George Campbell
Published: (1960)

Load testing of bridges : current practice and diagnostic load testing /
Published: (2019)

Flat sheet metal girder with very thin metal web : Part 2 : Sheet metal girders with spars resistant to bending - oblique uprights - stiffness /
by: Wagner, Herbert, 1900-1982
Published: (1931)

Analysis of orthotropic beams /
by: Yang-Lioe, et al.
Published: (1979)

Highway loads and their effects on highway structures based on traffic data of 1942 /
by: Stephenson, Henson K. (Henson Knowlen), 1897-1978, et al.
Published: (1950)

Flat sheet metal girder with very thin metal web : Part 3 : Sheet metal girders with spars resistant to bending - the stress in uprights - diagonal tension fields /
by: Wagner, Herbert, 1900-1982
Published: (1931)

Proposed modification to AASHTO cross-frame analysis and design /
by: Reichenbach, Matthew Craig
Published: (2021)

Wheel load distribution in concrete box girder bridges /
by: Scordelis, Alex C.
Published: (1969)

The effects of end restraint on the dynamic response of beams and bridge spans /
by: McPhate, Andrew J.
Published: (1964)

The analysis of right, multi-girder, simple-span bridge decks as equivalent torsionally-weak grid systems.
by: Tamberg, K. G.
Published: (1965)

Analysis of continuous box girder bridges : a report of an investigation.
by: Scordelis, Alex C.
Published: (1967)

Distribution of wheel loads on timber bridges /
by: Erickson, E. C. O., et al.
Published: (1965)

Analysis of simply supported box girder bridges : a report of an investigation.
by: Scordelis, Alex C.
Published: (1966)

Strength and ductility of a three-span externally post-tensioned segmental box girder bridge model /
by: MacGregor, R. J. G.
Published: (1989)

Analysis of contiuous beams by infinite series ; stress analysis of contiuous highway bridges by new distribution factor /
by: Tuma, Jan J.
Published: (1953)

Deviation saddle behavior and design for externally post-tensioned bridges /
Published: (1988)

Highway bridges and culverts /
by: Coghlan, B. K.
Published: (1915)

State of the art externally post-tensioned bridges with deviators /
by: Powell, L. C.
Published: (1988)

G13.1 guidelines for steel girder bridge analysis /
Published: (2008)

Analysis of continuous beam bridges /
by: Tuma, Jan J.
Published: (1964)

Fatigue of curved steel bridge elements : design recommendations for fatigue of curved plate girder and box girder bridges /
by: Daniels, J. Hartley
Published: (1980)

Guidelines for analysis methods and construction engineering of curved and skewed steel girder bridges /
by: White, Donald Woodrow, 1959-
Published: (2012)

Laboratory tests of two-span prestressed reinforced concrete bridge girders constructed from three long segments /
by: Gamble, W. L. (William Leo)
Published: (1979)

Guide specifications for horizontally curved highway bridges, 1980 /
Published: (1980)