Elimination of waste : Plow bolts.

Choice of technique in bolt and nut manufacture /
by: McBain, N. S.
Published: (1982)

Comparative evaluation of conventional and resin bolting systems /
by: Karabin, George J., et al.
Published: (1976)

Bolted connection strength and bolt hold size /
by: Wilkinson, Thomas Lee
Published: (1993)

The design and construction of a strain-gaged resin bolt for the measurement of in-situ axial loads /
by: Sawyer, Stephen Gerard, et al.
Published: (1976)

Bolted-connection design /
by: Soltis, Lawrence A.
Published: (1987)

Fatigue of anchor bolts /
by: Frank, Karl H.
Published: (1978)

Development length for anchor bolts /
by: Breen, J. E. (John Edward), 1932-
Published: (1964)

Tightening of high strength metric bolts /
by: Gilroy, Michael J.
Published: (1997)

Axial tension fatigue strength of anchor bolts /
by: Fischer, Franklin L.
Published: (1977)

Bolts, nuts & screws ; a collection of practical discussions on engineering /
by: Peterka, August E. R., 1900-
Published: (1941)

A guide to the selection of high-strength anchor bolt materials /
by: Hasselwander, Gerard B.
Published: (1974)

Strength and behavior of anchor bolts embedded near edges of concrete piers /
by: Hasselwander, Gerard B.
Published: (1977)

Recommendations and suggestions of Bureau of Standards regarding standards for bolt heads, nuts, and screw heads.
Published: (1922)

Square, hex, heavy hex, and askew head bolts and hex, heavy hex, hex flange, lobed head, and lag screws (inch series) /
Published: (2013)

Failure of steam generator support bolting.
Published: (1980)

Stress corrosion cracking of reactor coolant pump bolts.
Published: (1990)

Field verification of load transfer mechanics of fully grouted roof bolts /
by: Signer, S. P. (Stephen P.)
Published: (1990)

New-York Screw Bolt Mills.
Published: (1849)

Turn-of-the-nut tightening of anchor bolts /
by: Richards, Jason Halbert, 1979-
Published: (2004)

Analysis of bolted joints-1999 : presented at the 1999 ASME Pressure Vessels and Piping Conference : Boston, Massachusetts, August 1-5, 1999 /
Published: (1999)

Analysis of bolted joints, 2000 : presented at the 2000 ASME Pressure Vessels and Piping Conference, Seattle, Washington, July 23-27, 2000 /
Published: (2000)

Bolt, nut and rivet standards /
Published: (1941)

Handbook of bolts and bolted joints /
Published: (2025)

Counterfeit metal fasteners : hearings before the Subcommittee on Oversight and Investigations of the Committee on Energy and Commerce, House of Representatives, One Hundredth Congress, first session, July 31, August 5, and October 19, 1987.
Published: (1988)

Modern machine shop's guide to threads, threading, and threaded fasteners /
by: Chapman, Woodrow W. (Woodrow Wilson), 1944-
Published: (2004)

Bent anchor bolts in boiling water reactor torus supports.
Published: (1989)

Tightening procedures for large-diameter anchor bolts /
Published: (1997)

Cracking of reactor vessel internal baffle former bolts in foreign plants.
Published: (1998)

Stainless Steel Fasteners : A Systematic Approach to Their Selection - A Designers' Handbook Series No 9003 /
Published: (2020)

Counterfeit bolts and fasteners : hearing before the Subcommittee on Science, Research, and Technology of the Committee on Science, Space, and Technology, U.S. House of Representatives, One Hundred First Congress, first session, April 5, 1989.
Published: (1989)

Use of seal cap enclosures to mitigate leakage from joints that use A-286 bolts.
Published: (2012)

Minimum edge distance for expansion anchor bolts.
Published: (1988)

Specification for structural joints using ASTM A325 or A490 bolts /
Published: (1980)

Hilti concrete expansion anchor bolts.
Published: (1986)

"Bolting degration or failure in nuclear power plants".
Published: (1991)

Strength of bolted timber connections with steel side members /
by: Wilkinson, Thomas Lee
Published: (1992)