Cover Image

A CFD-based study of the feasibility of adapting an erosion burner rig for examining the effect of CMAS deposition/corrosion on environmental barrier coatings /

Bibliographic Details
Main Authors:	Miller, Robert A. (Author), Kuczmarski, Maria A. (Author)
Format:	Government Document eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, August 2015.
Series:	NASA technical memorandum ; 2015-218757.
Subjects:	Computational fluid dynamics. Protective coatings. Corrosion; burners. Temperature effects. Crystallinity.
Online Access:	https://purl.fdlp.gov/GPO/gpo64048 http://purl.fdlp.gov/GPO/gpo64048

Similar Items

Burner rig with an unattached duct for evaluating the erosion resistance of thermal barrier coatings /
by: Miller, Robert A.
Published: (2011)

Mach 0.3 Burner Rig Facility at the NASA Glenn Materials Research Laboratory /
Published: (2011)

The corrosion protection of 6061-T6 aluminum by a polyurethane-sealed anodized coat /
by: Danford, Merlin D.
Published: (1990)

Calcium-magnesium-aluminosilicate (CMAS) reactions and degradation mechanisms of advanced environmental barrier coatings /
by: Ahlborg, Nadia, et al.
Published: (2013)

Low conductivity thermal barrier coatings /
by: Zhu, Dongming
Published: (2005)

The corrosion protection of AISI [trademark sign] 1010 steel by organic and inorganic zinc-rich primers /
by: Danford, M. D., et al.
Published: (1995)

LCF life of NiCr-Y coated disk alloys after shot peening, oxidation and hot corrosion /
by: Nesbitt, J. A.
Published: (2020)

LCF life of as-deposited and annealed NiCr-Y coatings for oxidation and hot corrosion protection of disk alloys /
by: Nesbitt, J. A.
Published: (2019)

Evaluation of oxidation damage in thermal barrier coating systems /
by: Zhu, Dongming, et al.
Published: (1996)

Development and life prediction of erosion resistant turbine low conductivity thermal barrier coatings /
by: Zhu, Dongming
Published: (2010)

Ribbon-burner simulation of the T-700 turbine shroud section for ceramic-lined seals research /
Published: (1985)

Design and performance optimizations of advanced erosion-resistant low conductivity thermal barrier coatings for rotorcraft engines /
by: Zhu, Dongming
Published: (2012)

Burner liner thermal/structural load modeling /
by: Maffeo, R.
Published: (1984)

Thermal conductivity of ceramic thermal barrier and environmental barrier coating materials /
Published: (2001)

Effect of layer-graded bond coats on edge stress concentration and oxidation behavior of thermal barrier coatings /
by: Zhu, Dongming, et al.
Published: (1998)

Combined experimental and numerical simulations of thermal barrier coated turbine blades erosion /
by: Hamed, A. (Awatef)
Published: (2013)

History of thermal barrier coatings for gas turbine engines : emphasizing NASA's role from 1942 to 1990 /
by: Robert A. Miller
Published: (2009)

Thermal fatigue and fracture behavior of ceramic thermal barrier coatings /
by: Zhu, Dongming, et al.
Published: (2001)

Thermal fatigue and fracture behavior of ceramic thermal barrier coatings /
by: Zhu, Dongming
Published: (2001)

Residual stresses in a NiCrY-coated powder metallurgy disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2017)

Sintering and creep behavior of plasma-sprayed zirconia and hafnia based thermal barrier coatings /
by: Zhu, Dongming, et al.
Published: (1998)

Analysis of the effect of surface modification on polyimide composites coated with erosion resistant materials.
by: Ndalama, Tchinga
Published: (2003)

Experimental clean combustor program : phase II : final report /
by: Roberts, R.
Published: (1976)

Cyclic oxidation and hot corrosion of NiCrY-coated disk superalloys /
by: Gabb, Timothy Paul, 1958-
Published: (2016)

Revisiting the birth of 7YSZ thermal barrier coatings : Steve Stecura /
by: Smialek, James L., et al.
Published: (2017)

Life prediction issues in thermal/environmental barrier coatings in ceramic matrix composites /
by: Shah, Ashwin R.
Published: (2001)

Thermal barrier coating life prediction model development : phase 1, final report /
by: DeMasi, J. T. (Jeanine T.)
Published: (1989)

Thermal fatigue testing of ZrO₂-Y₂0₃ thermal barrier coating systems using a high power CO₂ laser /
by: Zhu, Dongming, et al.
Published: (1997)

Thermal and environmental barrier coating development for advanced propulsion engine systems /
by: Zhu, Dongming
Published: (2008)

The oxidation and corrosion of ODS alloys /
by: Lowell, Carl E.
Published: (1990)

Stochastic simulation of mudcrack damage formation in an environmental barrier coating /
by: Nemeth, Noel N.
Published: (2020)

Rocket thrust chamber thermal barrier coatings : final report /
by: Batakis, Anthony P.
Published: (1985)

The lattice and thermal radiation conductivity of thermal barrier coatings : models and experiments /
by: Zhu, Dongming
Published: (2010)

Temperature measurement involving nanostructured thermal barrier coating using a multiwavelength pyrometer /
by: Ng, Daniel L.
Published: (1996)

Crack driving forces in a multilayered coating system for ceramic matrix composite substrates /
by: Ghosn, Louis J.
Published: (2005)

Simulation of fatigue crack initiation at corrosion pits with EDM notches /
by: Smith, Stephen W.
Published: (2003)

Simulation of fatigue crack initiation at corrosion pits with EDM notches /
by: Smith, Stephen W.
Published: (2003)

Surface cracking and interface reaction associated delamination failure of thermal and environmental barrier coatings /
Published: (2003)

Synthesis, structure, characterization, and decomposition of nickel dithiocarbamates : effect of precursor structure and processing conditions on solid-state products /
by: Hepp, Aloysius F.
Published: (2016)

Crystallization kinetics of calcium-magnesium aluminosilicate (CMAS) glass /
by: Wiesner, Valerie L., et al.
Published: (2015)