Cover Image

The revamping of an ignition test facility /

Show other versions (1)

Bibliographic Details
Main Author:	Kearns, Kimberly A. (Author)
Corporate Author:	United States. National Aeronautics and Space Administration (sponsoring body.)
Format:	Government Document eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, December 2002.
Series:	NASA technical memorandum ; 2002-212095.
Subjects:	Test facilities. Test stands. Ignition. Combustion. Rockets.
Online Access:	https://purl.fdlp.gov/GPO/LPS46083

Similar Items

The revamping of an ignition test facility /
by: Kearns, Kimberly A.
Published: (2002)

Experimental evaluation of the ignition process of carbon monoxide and oxygen in a rocket engine /
by: Linne, Diane L.
Published: (1996)

Thruster injector faceplate testing in support of the aerojet rocket-based combined cycle (RBCC) concept /
by: Fazah, M. M.
Published: (1998)

Ignition overpressure study from solid rocket motor firings /
by: Counter, Douglas D.
Published: (1987)

Ignition and combustion characteristics of metallized propellants : semi-annual report (January 1990-June 1990) /
by: Turns, Stephen R.
Published: (1990)

Spontaneous ignition delay characteristics of hydrocarbon fuel-air mixtures /
by: Lefebvre, Arthur H. (Arthur Henry), 1923-2003
Published: (1986)

Low thrust rocket text facility /
by: Arrington, Lynn A.
Published: (1990)

Space station cathode ignition test status at 32,000 cycles /
Published: (1997)

Space station cathode ignition test status at 32,000 cycles /
by: Zakany, James S., et al.
Published: (1997)

Space propulsion research facility (B-2) : an innovative, multi-purpose test facility /
Published: (2011)

Ignition of cellulosic paper at low radiant fluxes /
by: White, K. Alan
Published: (1996)

Feasibility study and verified design concept for new improved hot gas facility : final report /
Published: (1986)

Systems tunnel linear shaped charge lightning strike : final test report /
by: Cook, M.
Published: (1989)

Guide for oxygen hazards analyses on components and systems /
by: Stoltzfus, Joel M., et al.
Published: (1996)

LOX/Hydrocarbon combustion instability investigation /
by: Jensen, R. J.
Published: (1989)

Replacement of hydrochlorofluorocarbon-225 solvent for cleaning and verification sampling of NASA propulsion oxygen systems hardware, ground support equipment, and associated test systems /
by: Burns, H. D.
Published: (2015)

SRM propellant, friction/ESD testing /
by: Campbell, LaVere A.
Published: (1989)

NASA Plum Brook's B-2 test facility : thermal vacuum and propellant test facility /
by: Kudlac, Maureen T., et al.
Published: (2012)

Combustion characteristics in the transition region of liquid fuel sprays : final report, January 1983 - September 1985 /
by: Cernansky, N. P.
Published: (1986)

LSP composite susbtrate test bed design /
by: Day, Arthur C., et al.
Published: (2013)

Flight set 360L001 (STS-26) igniter, post flight, final report.
by: Hale, E. J.
Published: (1990)

Summary of Stirling convertor testing at NASA Glenn Research Center /
by: Schreiber, Jeffrey G.
Published: (2006)

Preparation for scaling studies of ice-crystal icing at the NRC Research Altitude Test Facility /
by: Struk, Peter M.
Published: (2013)

Data acquisition system architecture and capabilities at NASA GRC Plum Brook Station's space environment test facilities /
by: Evans, Richard K., et al.
Published: (2014)

Space power facility : capabilities for space environmental testing within a single facility /
by: Sorge, Richard N.
Published: (2013)

Validation of high aspect ratio cooling in a 89 kN (20,000 lbf) thrust combustion chamber /
by: Wadel, Mary F., et al.
Published: (1996)

NASA's Evolutionary Xenon Thruster (NEXT) Prototype Model 1R (PM1R) ion thruster and propellant management system wear test results /
by: Van Noord, Jonathan L.
Published: (2010)

Sources of variation in creep testing /
by: Loewenthal, William S.
Published: (2011)

Comparison of system identification techniques for the Hydraulic Manipulator Test Bed (HMTB) /
by: Morris, A. Terry
Published: (1996)

Overview of the NASA Ames-Dryden integrated test facility /
by: Mackall, Dale A., et al.
Published: (1990)

High-temperature test facility at the NASA Lewis Engine Components Research Laboratory /
by: Colantonio, Renato O.
Published: (1990)

Transition region ignition characteristics of N-heptane fuel sprays /
by: Danis, Allen M., 1955-, et al.
Published: (1985)

Flight motor set 360L007 (STS-33R), final report /
by: Garecht, Diane
Published: (1990)

Application of background oriented Schlieren for altitude testing of rocket engines /
by: Wernet, Mark P., et al.
Published: (2017)

Identification of noise sources during rocket engine test firings and a rocket launch using a microphone phased-array /
by: Panda, J. (Jayanta), et al.
Published: (2013)

Evaluating the Acoustic effect of over-the-rotor Foam-Metal Liner installed on a low speed fan using Virtual Rotating Microphone imaging /
by: Sutliff, Daniel L.
Published: (2010)

Qualification of the RSRM case membrane case-to-insulation bondline inspection using the Thiokol Corporation ultrasonic RSRM bondline inspection system : final test report /
by: Cook, M.
Published: (1990)

Qualification of the RSRM field joint CF case-to-insulation bondline inspection using the Thiokol Corporation ultrasonic RSRM bondline inspection system : final test report /
by: Cook, M.
Published: (1990)

Detailed mechanism for oxidation of benzene /
by: Bittker, David A.
Published: (1990)

Formed platelet liner construction feasibility /
by: Hays, W. A., et al.
Published: (1992)