Cover Image

Conceptual design for a dual-bell rocket nozzle system using a NASA F-15 airplane as the flight testbed /

Bibliographic Details
Main Author:	Jones, Daniel S. (Author)
Format:	Government Document eBook
Language:	English
Published:	Edwards, CA : National Aeronautics and Space Administration, Armstrong Flight Research Center, October 2014.
Series:	NASA technical memorandum ; 2014-218376.
Subjects:	Convergent-divergent nozzles. Flow distribution. Inviscid flow. Nozzle design. Rocket nozzles.
Online Access:	https://purl.fdlp.gov/GPO/gpo58350 http://purl.fdlp.gov/GPO/gpo58350

Similar Items

Effects of sidewall geometry on the installed performance of nonaxisymmetric convergent-divergent exhaust nozzles /
by: Yetter, Jeffery A., et al.
Published: (1980)

Proposed flight research of a dual-bell rocket nozzle using the NASA F-15 airplane /
by: Jones, Daniel S., et al.
Published: (2013)

Vacuum chamber pressure effects on thrust measurements of low Reynolds number nozzles /
Published: (1985)

Investigation of convergent-divergent nozzles applicable to reduced-power supersonic cruise aircraft /
by: Berrier, Bobby L., et al.
Published: (1980)

Transonic investigation of two-dimensional nozzles designed for supersonic cruise /
by: Capone, Francis J., et al.
Published: (2015)

Flow processes in overexpanded chemical rocket nozzles.
by: Schmucker, Robert H.
Published: (1984)

Flow processes in overexpanded chemical rocket nozzles.
by: Schmucker, Robert H.
Published: (1984)

A performance comparison of two small rocket nozzles /
by: Arrington, Lynn A., et al.
Published: (1996)

Internal thrust and pumping performance of an auxiliary inlet ejector nozzle with clamshell thrust reverser /
by: Mansour, Ali H., et al.
Published: (1969)

Analysis and design of optimized truncated scarfed nozzles subject to external flow effects /
by: Shyne, Rickey J.
Published: (1990)

Comparison of numerically simulated and experimentally measured performance of a rotating detonation engine /
by: Paxson, Daniel E.
Published: (2015)

Static internal performance of a two-dimensional convergent-divergent nozzle with external shelf /
by: Lamb, Milton, et al.
Published: (1996)

Investigation of low-Reynolds-number rocket nozzle design using PNS-based optimization procedure /
by: Hussaini, M. Moin, et al.
Published: (1996)

Exhaust nozzle plume and shock wave interaction /
by: Castner, Raymond S., et al.
Published: (2013)

Mach 5 electroformed nickel nozzle refurbishment : FNAS investigation of ultra-smooth surfaces /
by: Rood, Robert, et al.
Published: (1992)

Exhaust nozzle plume effects on sonic boom test results for isolated nozzles /
by: Castner, Raymond S.
Published: (2011)

Shelf life extension for the lot AAE nozzle severance LSCs : final test report /
by: Cook, M.
Published: (1990)

Effects of nozzle exit geometry and pressure ratio on plume shape for nozzles exhausting into quiescent air /
by: Scallion, W. I.
Published: (1991)

Methodology for three dimensional nozzle design /
by: Ferri, Aldo A., et al.
Published: (1974)

An experimental comparison of nonswirling and swirling flow in a circular-to-rectangular transition duct /
by: Reichert, Bruce A.
Published: (1991)

Multidisciplinary approach to aerospike nozzle design /
by: Korte, J. J.
Published: (1997)

Noise from aft deck exhaust nozzles : differences in experimental embodiments /
by: Bridges, James E.
Published: (2014)

Separate flow nozzle test status meeting : proceedings of a conference held at and sponsored by NASA Glenn Research Center, Cleveland, Ohio, September 9-10, 1997 /
Published: (2000)

Acoustic investigation of jet mixing noise in dual stream nozzles /
by: Khavaran, Abbas, 1953-, et al.
Published: (2012)

Aeroacoustic data for a high Reynolds number axisymmetric subsonic jet /
by: Ponton, Michael K., et al.
Published: (1999)

Aeropropulsive characteristics of isolated combined turbojet/ramjet nozzles at Mach numbers from 0 to 1.20 /
by: Carson, George T., et al.
Published: (1988)

Calibration for thrust and airflow measurements in the CE-22 Advanced Nozzle Test Facility /
by: Werner, Roger A.
Published: (2010)

Static internal performance of a two-dimensional convergent nozzle with thrust-vectoring capability up to 60 ̊ /
by: Leavitt, Laurence D.
Published: (1985)

Decomposing solid micropropulsion nozzle performance issues /
by: Reed, Brian D.
Published: (2003)

Uncertainty analysis of the CE-22 advanced nozzle test facility /
by: Hubbard, Erin P.
Published: (2019)

Measured pressure distributions inside nonaxisymmetric nozzles with partially deployed thrust reversers /
by: Green, Robert S.
Published: (1987)

CFD analysis of nozzle jet plume effects on sonic boom signature /
by: Bui, Trong T.
Published: (2009)

Analysis of internal flow in a ventral nozzle for STOVL aircraft /
by: Smith, C. Frederic
Published: (1990)

Effect of delta tabs on free jets from complex nozzles /
by: Zaman, K. B. M. Q. (Khairul B. M. Q.)
Published: (2001)

Effect of delta tabs on free jets from complex nozzles /
by: Zaman, K. B. M. Q. (Khairul B. M. Q.)
Published: (2001)

Measured pressure distributions inside nonaxisymmetric nozzles with partially deployed thrust reversers /
by: Green, Robert S.
Published: (1987)

Trapped waves and screech tones with various rectangular nozzles /
by: Zaman, K. B. M. Q. (Khairul B. M. Q.), et al.
Published: (2021)

A survey of challenges in aerodynamic exhaust nozzle technology for aerospace propulsion applications /
by: Shyne, Rickey J.
Published: (2002)

A survey of challenges in aerodynamic exhaust nozzle technology for aerospace propulsion applications /
by: Shyne, Rickey J.
Published: (2002)

Experimental evaluation of a translating nozzle sidewall radial turbine /
by: Roelke, Richard J.
Published: (1987)