Cover Image

Wing shape sensing from measured strain /

Bibliographic Details
Main Author:	Pak, Chan-gi (Author)
Corporate Author:	Fundamental Aeronautics Program (U.S.)
Format:	Government Document eBook
Language:	English
Published:	Edwards, CA : National Aeronautics and Space Administration Armstrong Flight Research Center, January 2015.
Series:	NASA technical memorandum ; 2015-218358.
Subjects:	Aircraft structures. Aerodynamic loads. Finite element method. Strain measurement. Least squares method.
Online Access:	https://purl.fdlp.gov/GPO/gpo58346 http://purl.fdlp.gov/GPO/gpo58346

Similar Items

Full-field reconstruction of structural deformations and loads from measured strain data on a wing test article using the inverse finite element method /
by: Miller, Eric J., et al.
Published: (2016)

Method for estimating operational loads on aerospace structures using span-wisely distributed surface strains /
by: Ko, William L., et al.
Published: (2013)

Finite element analysis and test results comparison for the hybrid wing body center section test article /
by: Przekop, Adam
Published: (2016)

The L₁ finite element method for pure convection problems /
by: Jiang, Bo-Nan, 1940-
Published: (1991)

Large-deformation displacement transfer functions for shape predictions of highly flexible slender aerospace structures /
by: Ko, William L., et al.
Published: (2013)

Correlation of structural analysis and test results for the McDonnell Douglas stitched/RFI all-composite wing stub box /
by: Wang, John T.
Published: (1996)

A least-squares finite element method for incompressible Navier-Stokes problems /
by: Jiang, Bo-Nan, 1940-
Published: (1989)

Strain-based damage determination using finite element analysis for structural health management /
by: Hochhalter, Jacob D., et al.
Published: (2016)

Finite element thermo-viscoplastic analysis of aerospace structures /
by: Pandey, Ajay K.
Published: (1990)

Predictions of thermal buckling strengths of hypersonic aircraft sandwich panels using minimum potential energy and finite element methods /
by: Ko, William L.
Published: (1995)

Development and calibration of a system-integrated rotorcraft finite element model for impact scenarios /
by: Annett, Martin S.
Published: (2012)

Reduced uncertainties in the flutter analysis of the aerostructures test wing /
by: Pak, Chan-gi
Published: (2011)

Preliminary in-flight loads analysis of in-line launch vehicles using the VLOADS 1.4 program /
by: Graham, J. B. (Jerry B.), et al.
Published: (1998)

A review of the analytical simulation of aircraft crash dynamics /
Published: (1990)

A discourse on sensitivity analysis for discretely-modeled structures /
by: Adelman, Howard M.
Published: (1991)

Application of composite mechanics to composites enhanced concrete structures /
by: Chamis, C. C. (Christos C.)
Published: (2006)

Thermal and mechanical buckling analysis of hypersonic aircraft hat-stiffened panels with varying face sheet geometry and fiber orientation /
by: Ko, William L.
Published: (1996)

Measuring crack length in coarse grain ceramics /
by: Salem, Jonathan A.
Published: (2010)

A rapid empirical method for estimating the gross takeoff weight of a high speed civil transport /
by: Mack, Robert J.
Published: (1999)

Combined effect of matrix cracking and stress-free edge on delamination /
by: Salpekar, Satish A. (Satish Annaji), 1954-
Published: (1990)

Three-dimensional elastic-plastic finite-element analysis of fatigue crack propagation /
by: Chermahini, R. G.
Published: (1985)

On the correlation of specific film thickness and gear pitting life /
by: Krantz, T. L. (Timothy L.)
Published: (2015)

Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures /
by: Lissenden, Cliff Jesse, et al.
Published: (1998)

Evaluation of a strain-gage load calibration on a low-aspect-ratio wing structure at elevated temperature /
by: Reardon, Lawrence R.
Published: (1989)

Validation of design and analysis techniques of tailored composite structures /
by: Wijayratne, Dulnath D.
Published: (2004)

Postbuckling delamination of a stiffened composite panel using finite element methods /
by: Natsiavas, S., et al.
Published: (1987)

Frequency analysis via the method of moment functionals /
by: Pearson, A. E.
Published: (1990)

Dynamic shape reconstruction of three-dimensional frame structures using the inverse finite element method /
Published: (2011)

Modal analysis of UH-60A instrumented rotor blades /
by: Hamade, Karen S.
Published: (1990)

Element load data processor (ELDAP) user's manual /
by: Ramsey, John K., Jr, et al.
Published: (2015)

Analytic semigroups : applications to inverse problems for flexible structures /
by: Banks, H. T. (Harvey Thomas), 1940-
Published: (1990)

Development of a benchmark example for delamination fatigue growth prediction /
by: Krueger, Ronald
Published: (2010)

Development and application of benchmark examples for mixed-mode I/II quasi-static delamination propagation predictions /
by: Krueger, Ronald
Published: (2012)

Influence of finite element software on energy release rates computed using the virtual crack closure technique /
by: Krueger, Ronald
Published: (2006)

Least squares methods of analyzing spectroscopic data /
by: Shaw, J. H.
Published: (1984)

Exploratory study for continuous-time parameter estimation of ankle dynamics /
by: Kukreja, Sunil L.
Published: (2014)

Specimens and reusable fixturing for testing advanced aeropropulsion materials under in-plane biaxial loading.
by: Ellis, J. R.
Published: (2001)

Modeling and analysis of fluted-core composite structures for aerospace applications /
by: Oremont, Leonard
Published: (2021)

Calibration of a structural finite element model for a representative inflatable space structure utilizing probabilistic methods and surrogate models /
by: Lyle, Karen H., et al.
Published: (2019)

A three dimensional thermodynamically based function for the progressive failure of unidirectional composites /
by: Huang, H. Sam, et al.
Published: (2019)