Development and testing of an ISRU soil mechanics vacuum test facility /

Solar simulation for the CREST preflight thermal-vacuum test at B-2 /
by: Ziemke, Robert A.
Published: (2013)

Flexible radiator thermal vacuum test report /
by: Oren, J. A.
Published: (1982)

Effect of test environment on lifetime of two vacuum lubricants determined by spiral orbit tribometry /
by: Pepper, Stephen V.
Published: (2011)

Contamination control assessment of the world's largest space environment simulation chamber /
by: Snyder, Aaron
Published: (2012)

NASA Plum Brook's B-2 test facility : thermal vacuum and propellant test facility /
by: Kudlac, Maureen T., et al.
Published: (2012)

Vibration and thermal vacuum qualification test results for a low-voltage tungsten-halogen light /
by: Sexton, J. Andrew
Published: (1991)

Space propulsion research facility (B-2) : an innovative, multi-purpose test facility /
Published: (2011)

Extended operation of Stirling convertors in a thermal vacuum environment /
by: Oriti, Salvatore M.
Published: (2006)

Thermal energy for lunar in situ resource utilization : technical challenges and technology opportunities /
Published: (2011)

Experimental determination of in situ utilization of lunar regolith for thermal energy storage /
by: Richter, Scott W.
Published: (1993)

New mathematical functions for vacuum system analysis /
by: Woronowicz, Michael S. (Michael Stanley)
Published: (2017)

High-flux, high-temperature thermal vacuum qualification testing of a solar receiver aperture shield /
by: Kerslake, Thomas W., et al.
Published: (1997)

An experimental study of upward burning over long solid fuels : facility development and comparison /
by: Julie Kleinhenz
Published: (2011)

Performance test results of the NASA-457M v2 Hall thruster /
by: Soulas, George C. (George Chris), 1966-
Published: (2012)

Vacuum chamber pressure effects on thrust measurements of low Reynolds number nozzles /
Published: (1985)

Simplified methodology to estimate the maximum liquid helium (LHe) cryostat pressure from a vacuum jacket failure /
by: Ungar, Eugene K., et al.
Published: (2015)

Material total mass loss in vacuum obtained from various outgassing systems /
by: Scialdone, John J.
Published: (2000)

Tribological properties of polymer films and solid bodies in a vacuum environment /
by: Fusaro, Robert L.
Published: (1987)

Vapor pressure and evaporation rate of certain heat-resistant compounds in a vacuum at high temperatures /
by: Bolgar, A. S.
Published: (1985)

Development of a quadrupole-based secondary-ion mass spectrometry (SIMS) system at Lewis Research Center /
by: Vargas-Aburto, Carlos
Published: (1990)

Liquid methane conditioning capabilities developed at the NASA Glenn Research Center's Small Multi-purpose Research Facility (SMiRF) for accelerated lunar surface storage thermal testing /
Published: (2011)

Design and calibration of a vacuum compatible scanning tunneling microscope /
by: Abel, Phillip Benjamin
Published: (1990)

Stability of compactification during inflation /
Published: (1990)

NEXT propellant management system integration with multiple ion thrusters /
by: Sovey, J. S.
Published: (2011)

An evaluation of two flat-black silicone paints for space application /
by: Clatterbuck, Carroll H., et al.
Published: (1990)

Comparison of adhesion and retention forces for two candidate docking seal elastomers /
Published: (2011)

Structure-property characterization of rheocast and VADER processed IN-100 superalloy /
by: Cheng, Jung-Jen Allen
Published: (1985)

Extraction of thermal performance values from samples in the lunar dust adhesion bell jar /
by: Gaier, James R.
Published: (2010)

Modeling neutral densities downstream of a gridded ion thruster /
by: Soulas, George C.
Published: (2010)

Investigation of springback associated with composite material component fabrication : MSFC Center director's discretionary fund final report, Project 94-09 /
by: Benzie, M. A.
Published: (1997)

Thermal expansion of vacuum plasma sprayed coatings /
by: Raj, S. V.
Published: (2010)

Structural dynamics experimental activities in ultra-lightweight and inflatable space structures /
by: Pappa, Richard S.
Published: (2001)

Mixed composition materials suitable for vacuum web sputter coating /
Published: (1996)

Development of a reactor model for chemical conversion of Lunar regolith /
by: Hegde, U.
Published: (2009)

Bearing and gear steels for aerospace applications /
by: Zaretsky, Erwin V.
Published: (1990)

Erosional development of bedrock spur and gully topography in the Valles Marineris, Mars /
by: Patton, Peter C. (Peter Charles), 1949-
Published: (1990)