Cover Image

Investigation of spiral bevel gear condition indicator validation via AC-29-2C using damage progression tests /

Bibliographic Details
Main Author:	Dempsey, Paula J. (Author)
Corporate Author:	Fundamental Aeronautics Program (U.S.) (sponsoring body.)
Format:	Government Document eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, September 2014.
Series:	NASA technical memorandum ; 2014-218384.
Subjects:	Spiral bevel gears. Gear teeth. Helicopters. Failure analysis. Systems health monitoring.
Online Access:	https://purl.fdlp.gov/GPO/gpo57992 http://purl.fdlp.gov/GPO/gpo57992

Similar Items

Investigation of spiral bevel gear condition indicator validation via AC-29-2C using fielded rotorcraft HUMS data /
by: Dempsey, Paula J.
Published: (2014)

Investigation of spiral bevel gear condition indicator validation via AC-29-2C combining test rig damage progression data with fielded rotorcraft data /
by: Dempsey, Paula J.
Published: (2015)

Investigation of sideband index response to prototype gear tooth damage /
by: Dempsey, Paula J.
Published: (2013)

Integrating condition indicators and usage parameters for improved spiral bevel gear health monitoring /
by: Dempsey, Paula J., et al.
Published: (2013)

Experimental comparison of face-milled and face-hobbed spiral bevel gears /
Published: (2001)

Computerized design, generation, and simulation of meshing and contact of face-milled formate cut spiral bevel gears /
by: Litvin, F. L. (Faydor L.)
Published: (2001)

Gear tooth wear detection algorithm / Irebert R. Delgado.
by: Delgado, Irebert R.
Published: (2015)

Investigation of gearbox vibration transmission paths on gear condition indicator performance /
by: Dempsey, Paula J.
Published: (2013)

Contact and bending durability calculation for spiral-bevel gears /
by: Vijayakar, Sandeep
Published: (2016)

Validation of helicopter gear condition indicators using seeded fault tests /
by: Dempsey, Paula, et al.
Published: (2013)

Testing of face-milled spiral bevel gears at high-speed and load /
by: Handschuh, Robert F.
Published: (2001)

Testing of face-milled spiral bevel gears at high-speed and load /
by: Handschuh, Robert F.
Published: (2001)

Topology of modified helical gears /
Published: (1989)

Generation and tooth contact analysis of spiral bevel gears with predesigned parabolic functions of transmission errors /
by: Litvin, F. L. (Faydor L.)
Published: (1989)

Evaluation of MEMS-based wireless accelerometer sensors in detecting gear tooth faults in helicopter transmissions /
by: Lewicki, David G., et al.
Published: (2015)

Engagement of metal debris into a gear mesh /
by: Handschuh, Robert F.
Published: (2010)

Computerized generation and simulation of meshing of modified spur and helical gears manufactured by shaving /
Published: (2001)

Surface pitting fatigue life of noninvolute, low-contact-ratio gears /
by: Townsend, Dennis P.
Published: (1990)

Balancing dynamic strength of spur gears operated at extended center distance /
by: Lin, Hsiang Hsi
Published: (1996)

Straddle design of spiral bevel and hypoid pinions and gears /
by: Litvin, F. L. (Faydor L.)
Published: (1990)

Recent advances in the analysis of spiral bevel gears /
by: Handschuh, Robert F.
Published: (1997)

Simulating fatigue crack growth in spiral bevel pinion /
by: Ural, Ani
Published: (2003)

Gearing /
by: Coy, John J.
Published: (1985)

Computer simulation of gear tooth manufacturing processes /
by: Mavriplis, Dimitri
Published: (1990)

Computerized design and analysis of face-milled, uniform tooth height, spiral bevel gear drives /
by: Litvin, F. L. (Faydor L.), et al.
Published: (1996)

Continued evaluation of gear condition indicator performance on rotorcraft fleet /
by: Delgado, Irebert R.
Published: (2013)

Gear damage detection using oil debris analysis /
by: Dempsey, Paula J.
Published: (2001)

An experimental investigation of the influence of the lubricant viscosity and additives on gear wear /
by: Krantz, T. L. (Timothy L.)
Published: (2005)

A basis for solid modeling of gear teeth with application in design and manufacture /
Published: (1992)

Tribological evaluation of candidate gear materials operating under light loads in highly humid conditions /
by: DellaCorte, Christopher, et al.
Published: (2015)

Seeding cracks using a fatigue tester for accelerated gear tooth breaking /
Published: (2011)

Influence of linear profile modification and loading conditions on the dynamic tooth load and stress of high contact ration gears /
Published: (1990)

Minimizing load effects on NA4 gear vibration diagnostic parameter /
by: Dempsey, Paula J.
Published: (2001)

Vibration and operational characteristics of a composite-steel (hybrid) gear /
by: Handschuh, Robert F.
Published: (2014)

Non-linear dynamic analysis of geared systems.
by: Singh, Rajendra
Published: (1990)

Measurement of gear tooth dynamic friction /
by: Rebbechi, Brian, et al.
Published: (1996)

Summary of NASA landing gear research /
by: Fisher, B. D., et al.
Published: (1978)

Helical face gear development under the Enhanced Rotorcraft Drive System Program /
Published: (2011)

Minimizing load effects on NA4 gear vibration diagnostic parameter /
by: Dempsey, Paula J., et al.
Published: (2001)

Integrating oil debris and vibration gear damage detection technologies using fuzzy logic /
by: Dempsey, Paula J.
Published: (2002)