The effect of indenter ball radius on the static load capacity of the superelastic 60NiTi for rolling element bearings /

Microstructural and material quality effects on rolling contact fatigue of highly elastic intermetallic NiTi ball bearings /
by: DellaCorte, Christopher
Published: (2017)

Empirical study of the multiaxial, thermomechanical behavior of NiTiHf shape memory alloys /
by: Shukla, Dhwanil, et al.
Published: (2013)

Nickel-titanium alloys : corrosion "proof" alloys for space bearing, components and mechanism applications /
by: DellaCorte, Christopher
Published: (2010)

Macroscopic and microstructural aspects of the transformation behavior in a polycrystalline NiTi shape memory alloy /
by: Benafan, Othmane
Published: (2013)

Effect of upper-cycle temperature on the load-biased, strain-temperature response of NiTi /
Published: (2011)

Evaluation of Ti-48Al-2Cr-2Nb under fretting conditions /
Published: (2001)

The effect of various quenchants on the hardness and microstructure of 60-NITINOL /
by: Thomas, Fransua
Published: (2015)

Atomistic simulations of Ti additions to NiAl /
by: Bozzolo, G. (Guillermo)
Published: (1997)

Friction and wear of unlubricated NiTiHf with nitriding surface treatments /
by: Stanford, Malcolm Keith, 1970-
Published: (2018)

Three-dimensional cellular structures enhanced by shape memory alloys /
by: Nathal, Michael V.
Published: (2014)

Fractographic analysis of 60-nitinol bearing races /
by: Stanford, Malcolm Keith, 1970-
Published: (2018)

A comparison of quasi-static indentation to low-velocity impact /
by: Nettles, A. T. (Alan T.)
Published: (2000)

An introduction to the BFS method and its use to model binary NiAl alloys /
by: Bozzolo, G. (Guillermo)
Published: (1998)

The effectiveness of a NiCrY-coating on a powder metallurgy disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2018)

Thermoviscoplastic response of Ti-15-3 under various loading conditions /
by: Tuttle, M. E.
Published: (1991)

Tribological properties of ceramic/Ti₃Al-Nb sliding couples for use as candidate seal materials to 700 ⁰C /
by: DellaCorte, Christopher
Published: (1990)

Fatigue life of a NiCr-coated powder metallurgy disk superalloy after varied processing and exposures /
by: Gabb, Timothy P.
Published: (2018)

High temperature dispersion strengthening of NiAl /
by: Sherman, Mark, et al.
Published: (1986)

Viscoelastic response of the titanium alloy Ti-6-4 : experimental identification of time- and rate-dependent reversible and irreversible deformation regions /
by: Lerch, Bradley A., et al.
Published: (2014)

Deformation mechanisms of NiAl cyclicly deformed near the brittle-to-ductile transition temperature : final report /
by: Antolovich, S. D. (Stephen D.)
Published: (1992)

10 000-hour cyclic oxidation behavior at 982 °C (1800 °F) of 68 high-temperature Co-, Fe-, and Ni-base alloys /
by: Barrett, Charles A.
Published: (1997)

Tribological performance of PM400 bushings in oscillatory sliding from 25 to 927° C /
by: DellaCorte, Christopher, et al.
Published: (2019)

Fatigue crack growth characteristics of thin sheet titanium alloy Ti 6-2-2-2-2 /
by: Smith, Stephen W., et al.
Published: (2001)

Fatigue crack growth characteristics of thin sheet titanium alloy Ti 6-2-2-2-2 /
by: Smith, Stephen W.
Published: (2001)

Effects of cobalt in nickel-base superalloys /
by: Tien, John K., et al.
Published: (1983)

The Effect of hydrogen and microstructure on the deformation and fracture behavior of a single crystal nickel-base superalloy /
by: Walston, William S.
Published: (1990)

Effects of minor alloying additions on the microstructure, toughness, and creep strength of directionally solidified NiAl-31Cr-3Mo /
Published: (2001)

Dual microstructure heat treatment of a nickel-base disk alloy /
by: Gayda, John
Published: (2001)

Anisotropy of high temperature strength in precipitation-hardened nickel-base superalloy single crystals /
Published: (1986)

Specific hardening function definition and characterization of a multimechanism generalized potential-based viscoelastoplasticity model /
by: Saleeb, Atef F. (Atef Fatthy), 1952-
Published: (2003)

LCF life of as-deposited and annealed NiCr-Y coatings for oxidation and hot corrosion protection of disk alloys /
by: Nesbitt, J. A.
Published: (2019)

Determination of the gaseous hydrogen ductile-brittle transition in copper-nickel alloys /
Published: (1985)

Anisotropic constitutive model for nickel base single crystal alloys : development and finite element implementation /
by: Dame, L. Thomas
Published: (1986)

Yield behavior of solution treated and aged Ti-6A1-4V /
by: Ring, Andrew J.
Published: (2014)

Wear of steel and Ti6Al4V rollers in vacuum /
by: Krantz, T. L. (Timothy L.), et al.
Published: (2012)

The alloy undercooling experiment on the Columbia STS 61-C space shuttle mission /
by: Harf, Fredric H.
Published: (1987)