Cover Image

The mechanical properties of candidate superalloys for a hybrid turbine disk /

Bibliographic Details
Main Author:	Gabb, Timothy Paul, 1958- (Author)
Corporate Author:	Fundamental Aeronautics Program (U.S.) (sponsoring body.)
Format:	Government Document eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, July 2013.
Series:	NASA technical memorandum ; 217901.
Subjects:	Heat resistant alloys. Fatigue tests. Powder metallurgy. Cast alloys. Turbines.
Online Access:	https://purl.fdlp.gov/GPO/gpo51773 http://purl.fdlp.gov/GPO/gpo51773

Similar Items

Competition of failure modes in an additively manufactured disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2023)

The effectiveness of a NiCrY-coating on a powder metallurgy disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2018)

Fatigue life of a NiCr-coated powder metallurgy disk superalloy after varied processing and exposures /
by: Gabb, Timothy P.
Published: (2018)

Formation of minor phases in a nickel-based disk superalloy /
Published: (2012)

Effects of long term exposures on PM disk superalloys /
by: Gabb, Timothy Paul, 1958-
Published: (2013)

Characterization of the temperature capabilities of advanced disk alloy ME3 /
Published: (2002)

Comparison of [gamma-gamma] prime phase coarsening responses of three powder metal disk superalloys.
by: Gabb, Timothy Paul, 1958-
Published: (2016)

Dwell notch low cycle fatigue behavior of a powder metallurgy nickel disk alloy /
by: Telesman, J.
Published: (2012)

Tensile and creep property characterization of potential Brayton cycle impeller and duct materials /
by: Gabb, Timothy P.
Published: (2006)

Realistic subscale evaluations of the mechanical properties of advanced disk superalloys /
by: Gabb, Timothy Paul, 1958-
Published: (2003)

Influences of varied electrical discharge machining operations on surface conditions of several nickel-based superalloys /
by: Gabb, Timothy Paul, 1958-
Published: (2023)

Low-cost single-crystal turbine blades /
by: Strangman, T. E.
Published: (1984)

Thermal-mechanical fatigue behavior of nickel-base superalloys : final report /
by: Pelloux, R. M.
Published: (1986)

Effect of notches on creep-fatigue behavior of a P/M nickel-based superalloy /
by: Telesman, Jack
Published: (2015)

Retention of compressive residual stresses introduced by shot peening in a powder metal disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2016)

The tensile properties of advanced nickel-base disk superalloys during quenching heat treatments /
Published: (2001)

Quench crack behavior of nickel-base disk superalloys /
by: Gayda, John, et al.
Published: (2002)

Anisotropy of high temperature strength in precipitation-hardened nickel-base superalloy single crystals /
Published: (1986)

Oxidation and emittance of superalloys in heat shield applications /
by: Wiedemann, Karl E., et al.
Published: (1986)

Microstructure and oxidation of a MAX phase/superalloy hybrid interface /
by: Smialek, James L., et al.
Published: (2014)

Burst testing of a superalloy disk with a dual grain structure /
by: Gayda, John
Published: (2002)

Burst testing of a superalloy disk with a dual grain structure /
by: Gayda, John, et al.
Published: (2002)

Realistic subscale evaluations of the mechanical properties of advanced disk superalloys /
Published: (2003)

Effects of cobalt in nickel-base superalloys /
by: Tien, John K., et al.
Published: (1983)

Residual stresses in a NiCrY-coated powder metallurgy disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2017)

Cyclic oxidation and hot corrosion of NiCrY-coated disk superalloys /
by: Gabb, Timothy Paul, 1958-
Published: (2016)

Microstructure modeling of third generation disk alloys : final report /
by: Jou, Herng-Jeng
Published: (2010)

Factors which influence directional coarsening of Gamma prime during creep in nickel-base superalloy single crystals /
by: MacKay, Rebecca A.
Published: (1984)

Factors influencing dwell fatigue cracking in notches of powder metallurgy superalloys /
Published: (2011)

Elevated temperature tension, compression, and creep-rupture behavior of [001]-oriented single crystal superalloy PWA 1480 /
by: Hebsur, Mohan G.
Published: (1987)

Constitutive modeling for isotropic materials (HOST) : third annual status report /
Published: (1986)

Constitutive modeling for isotropic materials (HOST) /
Published: (1984)

High temperature brush seal tuft testing of selected nickel-chrome and cobalt-chrome superalloys /
by: Fellenstein, James A.
Published: (1997)

Burst testing and analysis of superalloy disks with a dual grain microstructure /
by: Gayda, John
Published: (2006)

Turbine blade and vane heat flux sensor development phase 1 /
by: Atkinson, W. H., et al.
Published: (1984)

Additive manufacturing of NiTiHf high temperature shape memory alloy /
by: Benafan, Othmane
Published: (2017)

Application of the Brinkley Dynamic Response Criterion to spacecraft transient dynamic events /
by: Somers, Jeffrey T., et al.
Published: (2017)

Anisotropic constitutive model for nickel base single crystal alloys : development and finite element implementation /
by: Dame, L. Thomas
Published: (1986)

Relationship between unusual high-temperature fatigue crack growth threshold behavior in superalloys and sudden failure mode transitions /
by: Telesman, Jack
Published: (2017)

Grain boundary engineering the mechanical properties of Allvac 718Plus[trademark symbol] superalloy /
Published: (2010)