An Approximate solution and master curves for buckling of symmetrically laminated composite cylinders /

Short-wavelength buckling and shear failures for compression-loaded composite laminates /
by: Shuart, Mark J.
Published: (1985)

Unit-sphere anisotropic multiaxial stochastic-strength model probability density distribution for the orientation of critical flaws /
by: Nemeth, Noel N.
Published: (2013)

Evaluation of the behavior of Technova Corporation rod-stiffened stitched compression specimens /
by: Dawn C. Jegley
Published: (2013)

The influence of lamination angles on the interior noise levels of an aircraft /
by: Fernholz, Christian M. (Christian Michael), et al.
Published: (1996)

Normalization of impact energy by laminate thickness for compression after impact testing /
by: Nettles, A. T. (Alan T.), et al.
Published: (2013)

Comparison of open-hole compression strength and compression after impact strength on carbon fiber/epoxy laminates for the Ares I composite interstage /
by: Hodge, A. J.
Published: (2011)

Buckling test results from the 8-foot-diameter orthogrid-stiffened cylinder test article TA01 : test dates: 19-21 November 2008 /
by: Hilburger, Mark W. (Mark William), et al.
Published: (2015)

Conditions for symmetries in the buckle patterns of laminated-composite plates /
by: Nemeth, Michael P.
Published: (2012)

Buckling behavior of long anisotropic plates subjected to combined loads /
by: Nemeth, Michael P.
Published: (1996)

Effects of thickness and ply orientation on buckling of laminated plates /
by: Jegley, Dawn C.
Published: (1986)

Effect of stress concentrations in composite structures : progress report /
by: Babcock, Charles D.
Published: (1985)

Investigating delamination migration in composite tape laminates /
by: Ratcliffe, James G., et al.
Published: (2014)

Compression after impact experiments and analysis on honeycomb core sandwich panels with thin facesheets /
by: McQuigg, Thomas D.
Published: (2011)

A three-node C ̊element for analysis of laminated composite sandwich shells /
by: Martin, C. Wayne
Published: (1989)

Cubic zig-zag enrichment of the classical Kirchhoff kinematics for laminated and sandwich plates /
by: Nemeth, Michael P.
Published: (2012)

A thermoelastic transversely isotropic thick walled cylinder/disk application : an analytical solution and study /
by: Arnold, S. M.
Published: (1989)

Nondimensional parameters and equations for nonlinear and bifurcation analyses of thin anisotropic quasi-shallow shells /
by: Nemeth, Michael P.
Published: (2010)

Analytic and computational perspectives of multi-scale theory for homogeneous, laminated composite, and sandwich beams and plates /
Published: (2012)

Fatigue damage in notched composite laminates under tension-tension cyclic loads /
Published: (1985)

Buckling analysis for stiffened anisotropic circular cylinders based on Sanders' nonlinear shell theory /
by: Nemeth, Michael P.
Published: (2014)

Preliminary nonlinear structural analysis of advanced composite tow-steered shells with large geometric imperfections /
by: Dobrin, Calvin P., et al.
Published: (2019)

Failure criterion of glass fabric reinforced plastic laminates /
by: Haga, Osamu
Published: (1986)

Influence of an asymmetric ring on the modeling of an orthogonally stiffened cylindrical shell /
by: Rastogi, Naveen
Published: (1994)

Composite laminate tailoring with probabilistic constraints and loads /
by: Thanedar, P. B.
Published: (1990)

Axial and torsional fatigue behavior of Waspaloy /
by: Zamrik, S. Y., 1932-
Published: (1986)

Composite sandwich structure and method for making same /
Published: (1995)

Modeling of unit-cells with Z-Pins using FLASH : pre-processing and post-processing /
by: Krueger, Ronald
Published: (2005)

Derivation of the data reduction equations for the calibration of the six-component thrust stand in the CE-22 advanced nozzle test facility /
by: Wong, Kin C.
Published: (2003)

Improved compression molding technology for continuous fiber reinforced composite laminates : Part 2: AS-4/Polyimidesulfone prepreg system /
Published: (1991)

An improved compression molding technology for continuous fiber reinforced composite laminate : Part 1: AS-4/LaRC-TPI 1500 (HFG) prepreg system /
by: Hou, T. H.
Published: (1991)

Buckling and postbuckling behavior of square compression-loaded graphite-epoxy plates with circular cutouts /
by: Nemeth, Michael P.
Published: (1990)

Computational implementation of a thermodynamically based work potential model for progressive microdamage and transverse cracking in fiber-reinforced laminates
Published: (2012)

Aeroelastic tailoring via tow steered composites /
by: Stanford, Bret K., et al.
Published: (2014)

Combined load test fixture /
by: Baker, Donald J.
Published: (2010)

Stacking-sequence optimization for buckling of laminated plates by integer programming /
by: Haftka, Raphael T.
Published: (1991)

Investigation of micro-scale architectural effects on damage of composites /
by: Stier, Bertram
Published: (2015)