Cover Image

Validation of helicopter gear condition indicators using seeded fault tests /

Bibliographic Details
Main Authors:	Dempsey, Paula (Author), Brandon, E. Bruce (Author)
Corporate Author:	United States. National Aeronautics and Space Administration (sponsoring body.)
Format:	Government Document eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, 2013.
Series:	NASA technical memorandum ; 217872.
Subjects:	Helicopter performance. Aircraft reliability. Systems health monitoring. Helicopter propeller drive. Spiral bevel gears. Fault detection.
Online Access:	https://purl.fdlp.gov/GPO/gpo45764 http://purl.fdlp.gov/GPO/gpo45764

Similar Items

Investigation of sideband index response to prototype gear tooth damage /
by: Dempsey, Paula J.
Published: (2013)

Integrating condition indicators and usage parameters for improved spiral bevel gear health monitoring /
by: Dempsey, Paula J., et al.
Published: (2013)

Investigation of spiral bevel gear condition indicator validation via AC-29-2C using damage progression tests /
by: Dempsey, Paula J.
Published: (2014)

Evaluation of MEMS-based wireless accelerometer sensors in detecting gear tooth faults in helicopter transmissions /
by: Lewicki, David G., et al.
Published: (2015)

Investigation of spiral bevel gear condition indicator validation via AC-29-2C using fielded rotorcraft HUMS data /
by: Dempsey, Paula J.
Published: (2014)

Investigation of gearbox vibration transmission paths on gear condition indicator performance /
by: Dempsey, Paula J.
Published: (2013)

Investigation of spiral bevel gear condition indicator validation via AC-29-2C combining test rig damage progression data with fielded rotorcraft data /
by: Dempsey, Paula J.
Published: (2015)

Experimental comparison of face-milled and face-hobbed spiral bevel gears /
Published: (2001)

Computerized design, generation, and simulation of meshing and contact of face-milled formate cut spiral bevel gears /
by: Litvin, F. L. (Faydor L.)
Published: (2001)

Gear tooth wear detection algorithm / Irebert R. Delgado.
by: Delgado, Irebert R.
Published: (2015)

Testing of face-milled spiral bevel gears at high-speed and load /
by: Handschuh, Robert F.
Published: (2001)

Testing of face-milled spiral bevel gears at high-speed and load /
by: Handschuh, Robert F.
Published: (2001)

Contact and bending durability calculation for spiral-bevel gears /
by: Vijayakar, Sandeep
Published: (2016)

Advanced Rotorcraft Transmission (ART) Program : Boeing helicopters status report.
by: Lenski, Joseph W.
Published: (1991)

Jetting phenomenon in meshed spur gears /
by: Delgado, Irebert, et al.
Published: (2018)

Fiber optic strain sensor for planetary gear diagnostics /
Published: (2011)

Improving the performance of the structure-based connectionist network for diagnosis of helicopter gearboxes /
by: Jammu, Vinay B. (Vinay Bhaskar), et al.
Published: (1997)

Continued evaluation of gear condition indicator performance on rotorcraft fleet /
by: Delgado, Irebert R.
Published: (2013)

Materials for helicopter gears.
Published: (1979)

Comparison of predicted and measured temperatures of UH-60A helicopter transmission /
by: Coe, Harold H.
Published: (1989)

Topology of modified helical gears /
Published: (1989)

Advanced Rotorcraft Transmission Program /
by: Bill, Robert C.
Published: (1990)

Simulations of the Mars helicopter test propeller in hover configuration at Martian pressure and air density /
by: Wagner, Lauren N.
Published: (2019)

Model helicopter rotor high-speed impulsive noise : measured acoustics and blade pressures /
Published: (1983)

System life and reliability modeling for helicopter transmissions /
by: Savage, M., et al.
Published: (1986)

Rotorcraft transmission noise path model, including distributed fluid film bearing impedance modeling /
Published: (2010)

Impact of flying qualities on mission effectiveness for helicopter air combat.
by: Harris, T. M.
Published: (1983)

Helical face gear development under the Enhanced Rotorcraft Drive System Program /
Published: (2011)

Simulation and evaluation of the SH-2F helicopter in a shipboard environment using the interchangeable cab system /
by: Paulk, Clyde H.
Published: (1983)

The implications of handling qualities in civil helicopter accidents involving hover and low speed flight /
by: Dugan, Daniel C., 1931-, et al.
Published: (2005)

Helicopter blade tips /
by: Lyothier, R.
Published: (1983)

A mathematical model of the UH-60 helicopter /
by: Hilbert, Kathryn B.
Published: (1984)

Design, generation and tooth contact analysis (TCA) of asymmetric face gear drive with modified geometry /
Published: (2001)

Helicopter impulsive noise : theoretical and experimental status /
by: Schmitz, F. H.
Published: (1983)

An experimental investigation of helicopter rotor hub fairing drag characteristics /
Published: (1989)

Helicopter model rotor-blade vortex interaction impulsive noise : scalability and parametric variations /
Published: (1984)

A survey of current rotorcraft propulsion health monitoring technologies /
by: Delgado, Irebert R.
Published: (2012)

Aerodynamic performance of a 0.27-scale model of an AH-64 helicopter with baseline and alternate rotor blade sets /
by: Kelley, Henry L.
Published: (1990)

Calculation of flight vibration levels of the AH-1G helicopter and correlation with existing flight vibration measurements /
by: DiTaranto, R. A.
Published: (1989)

Rotating shake test and modal analysis of a model helicopter rotor blade /
by: Wilkie, W. Keats, et al.
Published: (1997)