Cover Image

Combined cycle engine large-scale inlet for mode transition experiments : system identification rack hardware design /

Bibliographic Details
Main Authors:	Thomas, Randy (Author), Stueber, Thomas J. (Author)
Format:	Government Document eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, August 2013.
Series:	NASA technical memorandum ; 2013-217864.
Subjects:	Actuators. Control equipment. Data acquisition. Engine inlets. Feedback control. Hardware-in-the-loop simulation. Pressure sensors. Supersonic wind tunnels.
Online Access:	https://purl.fdlp.gov/GPO/gpo49566 http://purl.fdlp.gov/GPO/gpo49566

Similar Items

Advanced shock position control for mode transition in a turbine based combined cycle engine inlet model /
by: Csank, Jeffrey T., et al.
Published: (2013)

Shock position control for mode transition in a turbine based combined cycle engine inlet model /
by: Csank, Jeffrey T., et al.
Published: (2013)

Loop Shaping control design for a supersonic propulsion system model using quantitative feedback theory (QFT) specifications and bounds /
by: Connolly, Joseph W.
Published: (2010)

Computational analysis of a low-boom supersonic inlet /
by: Chima, Rodrick V.
Published: (2011)

Shock positioning controls design for a supersonic inlet /
by: Kopasakis, George
Published: (2010)

Analysis of buzz in a supersonic inlet /
by: Chima, Rodrick V.
Published: (2012)

Noise correction for supersonic inlet geometry /
by: Stephens, David B. (David Bruce)
Published: (2022)

An experimental device for generating high frequency perturbations in supersonic wind tunnels /
by: Melcher, Kevin J., et al.
Published: (1996)

Pressure probe designs for dynamic pressure measurements in a supersonic flow field /
by: Porro, A. Robert
Published: (2001)

Wind tunnel model design for the study of plume effects on sonic boom for isolated exhaust nozzles /
by: Castner, Raymond S.
Published: (2010)

Investigation of "6X" scramjet inlet configurations /
by: Alter, Stephen J.
Published: (2012)

A turbine based combined cycle engine inlet model and mode transition simulation based on HiTECC tool /
by: Csank, Jeffrey T., et al.
Published: (2012)

Testing of the NASA Hypersonics project's Combined Cycle Engine Large Scale Inlet Mode Transition Experiment (CCE LIMX) /
Published: (2012)

Highlights from a Mach 4 experimental demonstration of inlet mode transition for Turbine-Based Combined Cycle hypersonic propulsion /
by: Foster, Lancert E.
Published: (2012)

Computational fluid dynamics (CFD) simulation of hypersonic turbine-based combined-cycle (TBCC) inlet mode transition /
by: Slater, John W.
Published: (2010)

Check calibration of the NASA Glenn 10- by 10-foot supersonic wind tunnel (2014 test entry) /
by: Johnson, Aaron, et al.
Published: (2016)

Development and characterization testing of an air pulsation valve for a pulse detonation engine supersonic parametric inlet test section /
by: Tornabene, Robert
Published: (2005)

Shock generation and control using DBD plasma actuators : SBIR phase I final report /
by: Patel, Mehul P.
Published: (2012)

Parametric data from a wind tunnel test on a rocket-based combined-cycle engine inlet /
by: Fernandez, René
Published: (2001)

Parametric data from a wind tunnel test on a rocket-based combined-cycle engine inlet /
Published: (2001)

Planar Inlet Design and Analysis Process (PINDAP) /
by: Slater, John W.
Published: (2005)

Design of feedback control systems for stable plants with saturating actuators /
by: Kapasouris, Petros
Published: (1988)

Comparison of 3-D viscous flow computations of Mach 5 inlet with experimental data /
by: Reddy, D. R.
Published: (1990)

Verification assessment of flow boundary conditions for CFD analysis of supersonic inlet flows /
by: Slater, John W.
Published: (2002)

Factors influencing pitot probe centerline displacement in a turbulent supersonic boundary layer /
by: Grosser, Wendy I.
Published: (1997)

Design and development of an F/A-18 inlet distortion rake : a cost and time saving solution /
Published: (1995)

Axisymmetric calculations of a low-boom inlet in a supersonic wind tunnel /
by: Chima, Rodrick V.
Published: (2011)

Design and analysis tool for external-compression supersonic inlets /
by: Slater, John W.
Published: (2012)

Mach 10 experimental database of a three-dimensional scramjet inlet flow field /
by: Holland, Scott D.
Published: (1995)

Analysis of inlet-compressor acoustic interactions using coupled CFD codes /
by: Suresh, A. (Writer on numeric analysis)
Published: (1998)

A wind tunnel investigation of three NACA 1-series inlets at Mach numbers up to 0.92 /
by: Re, Richard J., et al.
Published: (1996)

The NASA Langley Research Center 0.3-meter transonic cryogenic tunnel T-P/Re-M controller manual /
by: Balakrishna, S.
Published: (1989)

The NASA Langley Research Center 0.3-meter transonic cryogenic tunnel T-P/Re-M controller manual /
by: Balakrishna, S.
Published: (1989)

Integrated tools for future distributed engine control technologies /
by: Culley, Dennis, et al.
Published: (2013)

A modular framework for modeling hardware elements in distributed engine control systems /
by: Zinnecker, Alicia M., et al.
Published: (2015)

NASA Glenn 1-by 1-foot supersonic wind tunnel user manual /
by: Seablom, Kirk D.
Published: (1999)

Validation of WIND for a series of inlet flows /
by: Slater, John W.
Published: (2002)

Validation of WIND for a series of inlet flows /
by: Slater, John W., et al.
Published: (2002)

Background pressure profiles for sonic boom vehicle testing in the NASA Glenn 8- by 6-foot supersonic wind tunnel /
by: Castner, Raymond S.
Published: (2013)

The use of a lidar forward-looking turbulence sensor for mixed-compression inlet unstart avoidance and gross weight reduction on a high speed civil transport /
by: Soreide, David
Published: (1997)