Advanced radiator concepts utilizing honeycomb panel heat pipes (stainless steel) : interim technical report /

Buckling design and analysis of a payload fairing 1/6th cylindrical arc-segment panel /
by: Kosareo, Daniel N., et al.
Published: (2013)

Stress corrosion study of PH13-8Mo stainless steel using the slow strain rate technique /
by: Torres, Pablo D.
Published: (1989)

Methods for assessing honeycomb sandwich panel wrinkling failures /
by: Zalewski, Bart F., et al.
Published: (2012)

Evaluation of ceramic honeycomb core compression behavior at room temperature /
by: Bird, R. Keith, et al.
Published: (2013)

Bioinspired honeycomb core design : an experimental study of the role of corner radius, coping, and interface /
by: Goss, Derek
Published: (2021)

Experimental behavior of fatigued single stiffener PRSEUS specimens /
by: Jegley, Dawn C.
Published: (2009)

Documentation of stainless steel lithium circuit test section design /
Published: (2010)

Failure assessment diagram for brazed 304 stainless steel joints /
by: Flom, Y.
Published: (2011)

An improved algorithm for the modeling of vapor flow in heat pipes /
by: Tower, Leonard K.
Published: (1989)

Efficient design and analysis of lightweight reinforced core sandwich and PRSEUS structures /
Published: (2011)

Compression after impact experiments and analysis on honeycomb core sandwich panels with thin facesheets /
by: McQuigg, Thomas D.
Published: (2011)

Constitutive modeling of the facesheet to core interface in honeycomb sandwich panels subject to mode I delamination /
by: Höwer, Daniel
Published: (2017)

Design considerations for lightweight space radiators based on fabrication and test experience with a carbon-carbon composite prototype heat pipe /
by: Juhasz, Albert J.
Published: (2002)

Thermal behavior of a titanium honeycomb-core sandwich panel /
by: Ko, William L.
Published: (1991)

An examination of impact damage in glass/phenolic and aluminum honeycomb core composite panels /
by: Nettles, A. T. (Alan T.)
Published: (1990)

Properties of 5052 aluminum for use as honeycomb core in manned spaceflight /
by: Lerch, Bradley A.
Published: (2018)

Development of a contact heat exchanger for a constructable radiator system.
Published: (1983)

Heat pipes and heat rejection component testing at NASA Glenn Research Center /
by: Sanzi, James L.
Published: (2012)

Thermostructural behavior of a hypersonic aircraft sandwich panel subjected to heating on one side /
by: Ko, William L.
Published: (1997)

Evaluation of a double gimbal IPACS design /
by: Burke, P. R.
Published: (1986)

Comparison of the booster interface temperature in stainless steel (SS) v-channel versus the aluminum (Al) y-channel Primer Chamber Assemblies (PCAs) /
by: García, Roberto
Published: (2011)

An analytical method to calculate effective elastic properties of general multifunctional honeycomb cores in sandwich composites /
by: Saether, Erik, et al.
Published: (2019)

Rolling contact fatigue of surface modified 440C using a "GE-polymet" type disc rod test rig /
by: Thom, Robert L.
Published: (1990)

60NiTi intermetallic material evaluation for lightweight and corrosion resistant spherical sliding bearings for aerospace applications : report on NASA-Kamatics SAA3-1288 /
by: DellaCorte, Christopher, et al.
Published: (2015)

A damage tolerance comparison of composite hat-stiffened and honeycomb sandwich structure for launch vehicle interstage applications /
by: Nettles, A. T. (Alan T.)
Published: (2011)

Flexible radiator thermal vacuum test report /
by: Oren, J. A.
Published: (1982)

Experimental and analytical evaluation of a composite honeycomb deployable energy absorber /
by: Jackson, Karen E.
Published: (2011)

Chemical and microstructural changes in metallic and ceramic materials exposed to Venusian surface conditions /
by: Costa, Gustavo C. C.
Published: (2017)

Electrochemical, polarization, and crevice corrosion testing of Inconel X750 : a supplement to the environmental control and life support system sustaining metal materials compatitbility studies /
by: Lee, R. E.
Published: (2019)

Composite Crew Module (CCM) permeability characterization /
by: Kirsch, Michael T.
Published: (2013)

Buckling testing and analysis of honeycomb sandwich panel arc segments of a full-scale fairing barrel /
by: Myers, David E. (Engineer), et al.
Published: (2013)

A compendium of brazed microstructures for fission power systems applications /
by: Locci, Ivan E.
Published: (2012)

Spectroscopic analysis of perfluoropolyether lubricant degradation during boundary lubrication /
by: Herrera-Fierro, Pilar, et al.
Published: (1996)

The effect of tensile stress on hydrogen diffusion in metal alloys /
by: Danford, Merlin D.
Published: (1992)

PRSEUS panel fabrication final report /
by: Linton, Kim A.
Published: (2014)

Alternate high capacity heat pipe final report /
by: Voss, F. E.
Published: (1986)