Cover Image

Ten year operating test results and post-test analysis of a 1/10 segment stirling sodium heat pipe : phase III final report /

Bibliographic Details
Main Authors:	Rosenfeld, John H. (Author), Minnerly, Kenneth G. (Author), Dyson, Christopher M. (Author)
Corporate Author:	Thermacore, Inc (Author)
Format:	Government Document eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, 2012.
Series:	NASA contractor report ; NASA CR-2012-217430.
Subjects:	Heat pipes. Stirling cycle. High temperature tests. Combustion chambers. Fuel cells. Heat transfer. Operating temperature. Gas turbines.
Online Access:	https://purl.fdlp.gov/GPO/gpo31113

Similar Items

Post-test analysis of a 10-year sodium heat pipe life test /
Published: (2011)

Heat pipe powered Stirling conversion for the demonstration using flattop fission (DUFF) test /
by: Gibson, Marc A. (Marc Andrew), et al.
Published: (2013)

Variable conductance heat pipe cooling of Stirling converter and general purpose heat source /
by: Tarau, Calin
Published: (2013)

Overview of multilayer metal insulation development for small stirling converters at NASA Glenn Research Center.
by: Goodell, Daniel D.
Published: (2020)

Initial characterization of a modular heat exchanger with an integral heat pipe /
by: Schreiber, Jeffrey G.
Published: (1989)

Initial characterization of a modular heat exchanger with an integral heat pipe /
by: Schreiber, Jeffrey G.
Published: (1989)

Refractory metal heat pipe life test : test plan and standard operating procedures /
by: Martin, J. J.
Published: (2010)

A computational methodology for simulating thermal loss testing of the Advanced Stirling C.
Published: (2012)

Alkali metal backup cooling for Stirling systems, experimental results /
by: Schwendeman, Carl
Published: (2013)

Contact thermocouple methodology and evaluation for temperature measurement in the laboratory /
by: Brewer, Ethan J., et al.
Published: (2013)

Cool-down and frozen start-up behavior of a grooved water heat pipe /
by: Jang, Jong Hoon
Published: (1990)

Experimental assessment of advanced Stirling component concepts /
by: Ziph, B.
Published: (1985)

Optimized heat pipe backup cooling system tested with a Stirling converter /
by: Schwendeman, Carl L.
Published: (2016)

NASA Lewis steady-state heat pipe code architecture : final report /
by: Mi, Ye, et al.
Published: (2013)

Beta testing of CFD code for the analysis of combustion systems /
by: Yee, Emma, et al.
Published: (2015)

Design of refractory metal heat pipe life test environment chamber, cooling system, and radio frequency heating system /
Published: (2011)

Approximation of engine casing temperature constraints for casing mounted electronics /
by: Kratz, Jonathan L., et al.
Published: (2017)

Overview of NASA multi-dimensional Stirling convertor code development and validation effort /
by: Tew, Roy C.
Published: (2002)

Overview of NASA multi-dimensional stirling convertor code development and validation effort /
Published: (2002)

Performance testing of a high temperature linear alternator for Stirling convertors /
by: Metscher, Jonathan F., et al.
Published: (2016)

Stirling convertor extended operation testing and data analysis at Glenn Research Center /
Published: (2010)

Test results from a pair of 1-kWe dual-opposed free-piston stirling power convertors integrated with a pumped NaK loop /
Published: (2011)

Effects of spent cooling and swirler angle on a 9-point swirl-venturi injector /
by: He, Zhuohui J.
Published: (2014)

Radioisotope heater unit-based stirling power convertor development at NASA Glenn Research Center /
by: Wilson, Scott D. (Scott Dean)
Published: (2018)

Alternate high capacity heat pipe final report /
by: Voss, F. E.
Published: (1986)

Materials and structures research for gas turbine applications within the NASA subsonic fixed wing project /
by: Hurst, Janet
Published: (2011)

Overview of heat addition and efficiency predictions for an advanced stirling convertor /
Published: (2012)

Combustion in advanced gas turbine systems proceedings.
Published: (1968)

Burner liner thermal/structural load modeling /
by: Maffeo, R.
Published: (1984)

Flame radiation and liner heat transfer in a tubular-can combustor /
by: Claus, Russell W.
Published: (1984)

Advanced Stirling converter dual converter controller testing at NASA Glenn Research Center in the radioisotope power systems system integration laboratory /
by: Dugala, Gina M.
Published: (2015)

Infrared low temperature turbine vane rough surface heat transfer measurements /
by: Boyle, Robert J.
Published: (2000)

Infrared low temperature turbine vane rough surface heat transfer measurements /
Published: (2000)

Parametric system model for a Stirling radioisotope generator /
by: Schmitz, Paul C. (Paul Charles), 1963-
Published: (2015)

Performance of an Advanced Stirling Convertor based on heat flux sensor measurements /
by: Wilson, Scott D. (Scott Dean)
Published: (2012)

Development of a linear Stirling system model with varying heat inputs /
by: Regan, Timothy F.
Published: (2007)

Progress towards the development of a long-lived Venus lander duplex system /
by: Dyson, Rodger W.
Published: (2011)

Review of computational Stirling analysis methods /
by: Dyson, Rodger W. (Rodger William), et al.
Published: (2004)

Optical characterization of a multipoint lean direct injector for gas turbine combustors : velocity and fuel drop size measurements /
Published: (2010)

Experience with advanced instrumentation in a hot section cascade /
by: Yeh, Frederick C.
Published: (1989)