Cover Image

Investigation of a Moiré based crack detection technique for propulsion health monitoring /

Bibliographic Details
Corporate Author:	NASA Glenn Research Center
Other Authors:	Woike, Mark R.
Format:	Government Document eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, [2012]
Series:	NASA technical memorandum ; 2012-217622.
Subjects:	Gas turbine engines. Blade tips. Clearances. Shafts (machine elements) Cracks. Detection. Optical measurement.
Online Access:	https://purl.fdlp.gov/GPO/gpo31889

Similar Items

Optical strain and crack-detection measurements on a rotating disk /
by: Woike, Mark R.
Published: (2013)

Toward understanding tip leakage flows in small compressor cores including stator leakage flow /
by: Berdanier, Reid A., et al.
Published: (2017)

Evaluation of an active clearance control system concept /
Published: (2005)

Integrated turbine tip clearance and gas turbine engine simulation /
by: Chapman, Jeffryes W.
Published: (2016)

A reduced model for prediction of thermal and rotational effects on turbine tip clearance /
by: Kypuros, Javier A.
Published: (2003)

Turbine engine clearance control systems : current practices and future directions /
by: Lattime, Scott B.
Published: (2002)

Turbine engine clearance control systems : current practices and future directions /
by: Lattime, Scott B., et al.
Published: (2002)

Effects of tip clearance and casing recess on heat transfer and stage efficiency in axial turbines /
by: Ameri, Ali A.
Published: (1998)

Heat transfer and flow on the first stage blade tip of a power generation gas turbine.
by: Ameri, Ali A.
Published: (1999)

Simulation of VSPT experimental cascade under high and low free-stream turbulence conditions /
by: Ameri, Ali A., et al.
Published: (2015)

Testing of a Microwave blade tip clearance sensor at the NASA Glenn Research Center /
Published: (2009)

Investigation of exoskeletal engine propulsion system concept /
Published: (2005)

Implementation of J-A methodology elastic-plastic crack instability analysis capability into the WARP-3D code /
by: Hamm, Kenneth R.
Published: (2018)

Blade tip rubbing stress prediction : final report /
by: Davis, Gary A.
Published: (1991)

Fatigue-life prediction methodology using small-crack theory /
by: Newman, J. C., et al.
Published: (1997)

Planetary gearbox fault detection using vibration separation techniques /
Published: (2011)

Wave engine topping cycle assessment /
by: Welch, Gerard E.
Published: (1996)

Elevated temperature crack growth : final report /
Published: (1988)

Integration methodology for oil-free shaft support systems : four steps to success /
by: Howard, Samuel A.
Published: (2010)

Comparison of various supersonic turbine tip designs to minimize aerodynamic loss and tip heating /
by: Shyam, Vikram
Published: (2012)

Helicopter blade tips /
by: Lyothier, R.
Published: (1983)

Evaluation of MEMS-based wireless accelerometer sensors in detecting gear tooth faults in helicopter transmissions /
by: Lewicki, David G., et al.
Published: (2015)

Development and testing of tip devices for horizontal axis wind turbines /
by: Gyatt, G. W.
Published: (1985)

Methodology for predicting the onset of widespread fatigue damage in lap-splice joints /
by: Newman, J. C.
Published: (1998)

Oil-free shaft support system rotordynamics : past, present, and future challenges and opportunities /
by: DellaCorte, Christopher
Published: (2011)

Corrosion fatigue crack propagation in metals /
by: Gangloff, R. P.
Published: (1990)

Investigation of bearing fatigue damage life prediction using oil debris monitoring /
Published: (2011)

An assessment of gas foil bearing scalability and the potential benefits to civilian turbofan engines /
by: Bruckner, Robert J.
Published: (2010)

Seeding cracks using a fatigue tester for accelerated gear tooth breaking /
Published: (2011)

Comprehensive structural dynamic analysis of the SSME/AT fuel pump first-stage turbine blade /
by: Brown, A. M.
Published: (1998)

A study of fan stage/casing interaction models /
by: Lawrence, Charles, 1957-
Published: (2003)

The aerodynamic performance of an over-the-rotor liner with circumferential grooves on a high bypass ratio turbofan rotor /
by: Bozak, Richard F., et al.
Published: (2013)

An applicational process for dynamic balancing of turbomachinery shafting /
by: Verhoff, Vincent G.
Published: (1990)

Assessment of High Temperature Superconducting (HTS) electric motors for rotorcraft propulsion /
by: Doernbach, Jay
Published: (1990)

Study of controlled diffusion stator blading : II. final report /
by: Behlke, R. F., et al.
Published: (1983)

Probabilistic analysis of bladed turbine disks and the effect of mistuning /
by: Shah, A. R.
Published: (1990)

Comprehensive modeling and analysis of rotorcraft variable speed propulsion system with coupled engine/transmission/rotor dynamics /
by: DeSmidt, Hans A.
Published: (2013)

Effect of cage design on characteristics of high-speed-jet-lubricated 35-millimeter-bore ball bearing /
by: Schuller, Fredrick T., et al.
Published: (1980)

Gear design effects on the performance of high speed helical gear trains as used in aerospace drive systems /
by: Handschuh, Robert F.
Published: (2013)

Vibration and operational characteristics of a composite-steel (hybrid) gear /
by: Handschuh, Robert F.
Published: (2014)