Effects of tip clearance and casing recess on heat transfer and stage efficiency in axial turbines /

A reduced model for prediction of thermal and rotational effects on turbine tip clearance /
by: Kypuros, Javier A.
Published: (2003)

Comparison of various supersonic turbine tip designs to minimize aerodynamic loss and tip heating /
by: Shyam, Vikram
Published: (2012)

Evaluation of an active clearance control system concept /
Published: (2005)

Turbine blade and vane heat flux sensor development phase 1 /
by: Atkinson, W. H., et al.
Published: (1984)

Performance of a high-work, low-aspect-ratio turbine tested with a realistic inlet radial temperature profile /
by: Stabe, Roy G.
Published: (1984)

Axial-flow turbine rotor discharge-flow overexpansion and limit-loading condition.
by: Chen, Shu-Cheng S.
Published: (2017)

Investigation of a Moiré based crack detection technique for propulsion health monitoring /
Published: (2012)

Heat transfer in gas turbines /
by: Garg, Vijay K., 1947-
Published: (2001)

A guide to axial-flow turbine off-design computer program AXOD2 /
by: Chen, Shu-cheng S.
Published: (2014)

Understanding and mitigating tip leakage and endwall losses in high pressure ratio cores /
by: Christophel, Jesse
Published: (2015)

Navier-Stokes analysis of turbine blade heat transfer /
by: Boyle, Robert J.
Published: (1990)

Fundamental and applied heat transfer research for gas turbine engines : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992 /
Published: (1992)

Metal temperatures and coolant flow in a wire-cloth transpiration-cooled turbine vane /
by: Gladden, Herbert J.
Published: (1975)

Blade tip rubbing stress prediction : final report /
by: Davis, Gary A.
Published: (1991)

Turbine blade and vane heat flux sensor development phase II /
by: Atkinson, W. H., et al.
Published: (1985)

Capability extension to the turbine off-design computer program AXOD with applications to the highly loaded fan-drive turbines /
by: Chen, Shu-cheng S.
Published: (2011)

Advanced turbine study : final report /
Published: (1985)

Materials and structures research for gas turbine applications within the NASA subsonic fixed wing project /
by: Hurst, Janet
Published: (2011)

Investigation of exoskeletal engine propulsion system concept /
Published: (2005)

Endwall heat transfer measurements in a transonic turbine cascade /
by: Giel, P. W.
Published: (1996)

Toward understanding tip leakage flows in small compressor cores including stator leakage flow /
by: Berdanier, Reid A., et al.
Published: (2017)

Turbine vane external heat transfer : final report /
Published: (1985)

Aerodynamic investigation of incidence angle effects in a large scale transonic turbine cascade /
by: McVetta, Ashlie B., et al.
Published: (2013)

Model 0A wind turbine generator FMEA /
by: Klein, William E.
Published: (1989)

Blade heat transfer measurements and predictions in a transonic turbine cascade /
by: Giel, P. W. (Paul W.)
Published: (1999)

Analytical and experimental evaluation of the heat transfer distribution over the surfaces of turbine vanes : final report /
Published: (1983)

An experimental study of the effect of wake passing on turbine blade film cooling /
by: Heidmann, James D.
Published: (1997)

Low-cost single-crystal turbine blades /
by: Strangman, T. E.
Published: (1984)

Recent progress in research pertaining to estimates of gas-side heat transfer in an aircraft gas turbine /
by: Graham, Robert W.
Published: (1990)

Probabilistic analysis of bladed turbine disks and the effect of mistuning /
by: Shah, A. R.
Published: (1990)

Optical strain and crack-detection measurements on a rotating disk /
by: Woike, Mark R.
Published: (2013)

The effects of Reynolds number, rotor incidence angle and surface roughness on the heat transfer distribution in a large-scale turbine rotor passage /
by: Blair, M. F.
Published: (1991)

The effects of Reynolds number, motor incidence angle and surface roughness on the heat transfer distribution in a large-scale turbine rotor passage /
by: Blair, M. F.
Published: (1991)

Development and testing of tip devices for horizontal axis wind turbines /
by: Gyatt, G. W.
Published: (1985)

Prediction of relaminarization effects on turbine blade heat transfer /
by: Boyle, Robert J.
Published: (2001)

Analysis of turbine blade relative cooling flow factor used in the subroutine coolit based on film cooling correlations /
by: Schneider, Steven J., et al.
Published: (2015)