Thermo-viscopiastic analysis of hypersonic structures subjected to severe aerodynamic heating : progress report for the period December 31, 1988 to September 30, 1989 /
| Main Author: | Thornton, Earl A. |
|---|---|
| Corporate Authors: | Old Dominion University. Department of Mechanical Engineering and Mechanics, Langley Research Center, Old Dominion University. Research Foundation |
| Format: | Government Document eBook |
| Language: | English |
| Published: |
Norfolk, Va. : Hampton, Va. :
Department of Mechanical Engineering and Mechanics, College of Engineering and Technology, Old Dominion University ; National Aeronautics and Space Administration, Langley Research Center,
[1989]
|
| Series: | NASA contractor report ;
NASA CR-185915. |
| Subjects: | |
| Online Access: | https://purl.fdlp.gov/GPO/gpo30800 |
Similar Items
Finite element thermo-viscoplastic analysis of aerospace structures /
by: Pandey, Ajay K.
Published: (1990)
by: Pandey, Ajay K.
Published: (1990)
Transonic aerodynamic characteristics of two hypersonic cruise configurations /
by: Langhans, Richard A.
Published: (1969)
by: Langhans, Richard A.
Published: (1969)
Comparison of analysis with test for static loading of two hypersonic inflatable aerodynamic decelerator concepts /
by: Lyle, Karen H.
Published: (2015)
by: Lyle, Karen H.
Published: (2015)
The application of active controls technology to a generic hypersonic aircraft configuration /
Published: (1990)
Published: (1990)
Hypersonic aerodynamic characteristics of a model of low-fineness-ratio variable-geometry logistics spacecraft concept /
by: Spencer, Bernard, 1932-
Published: (1968)
by: Spencer, Bernard, 1932-
Published: (1968)
Thermostructural analysis of unconventional wing structures of a Hyper-X hypersonic flight research vehicle for the Mach 7 mission /
by: Ko, William L.
Published: (2001)
by: Ko, William L.
Published: (2001)
Preliminary structural sensitivity study of hypersonic inflatable aerodynamic decelerator using probabilistic methods /
by: Lyle, Karen H.
Published: (2014)
by: Lyle, Karen H.
Published: (2014)
Experimental study of convective heating on the back face and payload of a Hypersonic Inflatable Aerodynamic Decelerator (HIAD) aeroshell /
by: Hollis, Brian R. (Brian Ray)
Published: (2017)
by: Hollis, Brian R. (Brian Ray)
Published: (2017)
Hypersonic inflatable aerodynamic decelerator (HIAD) torus mechanical testing /
by: Chen, Tony, et al.
Published: (2017)
by: Chen, Tony, et al.
Published: (2017)
Low-speed, high-lift aerodynamic characteristics of slender, hypersonic accelerator-type configurations /
by: Gatlin, Gregory M. (Gregory Michael)
Published: (1989)
by: Gatlin, Gregory M. (Gregory Michael)
Published: (1989)
Thermostructural behavior of a hypersonic aircraft sandwich panel subjected to heating on one side /
by: Ko, William L.
Published: (1997)
by: Ko, William L.
Published: (1997)
Results of A M = 5.3 heat transfer test of the integrated vehicle using phase-change paint techniques on the 0.0175-scale model 56-OTS in the NASA/AMES Research Center 3.5-foot hypersonic wind tunnel (IH-42) /
by: Marroquin, J.
Published: (1985)
by: Marroquin, J.
Published: (1985)
Aero-heating of shallow cavities in hypersonic freestream flow /
Published: (2010)
Published: (2010)
Experimental and theoretical aerodynamic characteristics of two hypersonic cruise aircraft concepts at Mach numbers of 2.96, 3.96, and 4.63 /
by: Pittman, Jimmy L., et al.
Published: (1980)
by: Pittman, Jimmy L., et al.
Published: (1980)
Optimum shape of a blunt forebody in hypersonic flow /
by: Maestrello, L.
Published: (1989)
by: Maestrello, L.
Published: (1989)
Design considerations for thermally insulating structural sandwich panels for hypersonic vehicles /
by: Blosser, Max L.
Published: (2016)
by: Blosser, Max L.
Published: (2016)
Hypersonic combined cycle propulsion /
Published: (1990)
Published: (1990)
Numerical procedure for three-dimensional hypersonic viscous flow over aerobrake configuration /
by: Li, Chien-peng
Published: (1985)
by: Li, Chien-peng
Published: (1985)
Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading : a semi-annual status report submitted to NASA-Lewis Research Center, Cleveland, Ohio /
by: Simitses, George J., 1932-
Published: (1987)
by: Simitses, George J., 1932-
Published: (1987)
Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading : a semi-annual status report submitted to NASA-Lewis Research Center, Cleveland, Ohio /
by: Simitses, George J., 1932-
Published: (1987)
by: Simitses, George J., 1932-
Published: (1987)
Design study of wafer seals for future hypersonic vehicles /
Published: (2005)
Published: (2005)
Modelling of engineering heat transfer phenomena /
Published: (1999)
Published: (1999)
Rapid fabrication of flat plate cavity phosphor thermography test models for shuttle return-to-flight aero-heating /
Published: (2006)
Published: (2006)
MINIVER upgrade for the AVID system.
by: Engel, Carl D.
Published: (1983)
by: Engel, Carl D.
Published: (1983)
MINIVER upgrade for the AVID system.
by: Engel, Carl D.
Published: (1983)
by: Engel, Carl D.
Published: (1983)
Structures and materials technology for hypersonic aerospacecraft /
by: McComb, Harvey G.
Published: (1990)
by: McComb, Harvey G.
Published: (1990)
Multidisciplinary analysis of a hypersonic engine /
by: Stewart, Mark E. M.
Published: (2002)
by: Stewart, Mark E. M.
Published: (2002)
Multidisciplinary analysis of a hypersonic engine /
Published: (2002)
Published: (2002)
Re-architecting the NASA wire derating approach for space flight applications /
by: Rickman, Steven L.
Published: (2018)
by: Rickman, Steven L.
Published: (2018)
Research in robust control for hypersonic vehicles : progress report #1 /
by: Calise, Anthony J.
Published: (1992)
by: Calise, Anthony J.
Published: (1992)
Investigation of piloting aids for manual control of hypersonic maneuvers /
by: Raney, David L.
Published: (1995)
by: Raney, David L.
Published: (1995)
Pegasus wing-glove experiment to document hypersonic crossflow transition : measurement systems and selected flight results /
by: Bertelrud, Arild
Published: (2000)
by: Bertelrud, Arild
Published: (2000)
Predictions of thermal buckling strengths of hypersonic aircraft sandwich panels using minimum potential energy and finite element methods /
by: Ko, William L.
Published: (1995)
by: Ko, William L.
Published: (1995)
Application of approximate unsteady aerodynamics for flutter analysis /
by: Pak, Chan-gi
Published: (2010)
by: Pak, Chan-gi
Published: (2010)
An approximate method for calculating three-dimensional inviscid hypersonic flow fields /
by: Riley, Christopher J. (Christopher Joseph), 1964-
Published: (1990)
by: Riley, Christopher J. (Christopher Joseph), 1964-
Published: (1990)
Solution-space screening of a hypersonic endurance demonstrator /
by: Chudoba, Bernd
Published: (2012)
by: Chudoba, Bernd
Published: (2012)
Computational modeling and validation for hypersonic inlets /
by: Povinelli, Louis A.
Published: (1990)
by: Povinelli, Louis A.
Published: (1990)
Thermal conductivity database of various structural carbon-carbon composite materials /
by: Ohlhorst, Craig W.
Published: (1997)
by: Ohlhorst, Craig W.
Published: (1997)
Evaluation of a technique to generate artificially thickened boundary layers in supersonic and hypersonic flows /
Published: (1991)
Published: (1991)
Analysis and sizing for transient thermal heating of insulated aerospace vehicle structures /
by: Blosser, Max L.
Published: (2012)
by: Blosser, Max L.
Published: (2012)