Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading : a semi-annual status report /

Plates and shells containing a surface crack under general loading conditions /
by: Joseph, Paul F., 1958-
Published: (1987)

Progressive fracture of fiber composite thin shell structures under internal pressure and axial loads /
by: Cios, Krzysztof J., et al.
Published: (1996)

Nondimensional parameters and equations for nonlinear and bifurcation analyses of thin anisotropic quasi-shallow shells /
by: Nemeth, Michael P.
Published: (2010)

Influence of an asymmetric ring on the modeling of an orthogonally stiffened cylindrical shell /
by: Rastogi, Naveen
Published: (1994)

Pre-test analysis predictions for the shell buckling knockdown factor checkout tests, TA01 and TA02 /
by: Thornburgh, Robert P.
Published: (2011)

Buckling analysis for stiffened anisotropic circular cylinders based on Sanders' nonlinear shell theory /
by: Nemeth, Michael P.
Published: (2014)

Recent advances in hybrid/mixed finite elements /
by: Pian, Theodore H. H., 1919-2009
Published: (1985)

Verification of orthogrid finite element modeling techniques /
by: Steeve, B. E.
Published: (1996)

On hybrid and mixed finite element methods /
by: Pian, Theodore H. H., 1919-2009
Published: (1981)

A three-node C ̊element for analysis of laminated composite sandwich shells /
by: Martin, C. Wayne
Published: (1989)

Loft : an automated mesh generator for stiffened shell aerospace vehicles /
by: Eldred, Lloyd B.
Published: (2011)

The modeling of piezoceramic patch interactions with shells, plates and beams /
by: Banks, H. T. (Harvey Thomas), 1940-
Published: (1992)

Composite Crew Module (CCM) permeability characterization /
by: Kirsch, Michael T.
Published: (2013)

Qualitative properties of large buckled states of spherical shells /
by: Shih, Ke-gang
Published: (1985)

The exact solution for linear thermoelastic axisymmetric deformations of generally laminated circular cylindrical shells /
by: Nemeth, Michael P., et al.
Published: (2012)

An Approximate solution and master curves for buckling of symmetrically laminated composite cylinders /
by: Nemeth, Michael P.
Published: (2013)

The influence of lamination angles on the interior noise levels of an aircraft /
by: Fernholz, Christian M. (Christian Michael), et al.
Published: (1996)

A thermoelastic transversely isotropic thick walled cylinder/disk application : an analytical solution and study /
by: Arnold, S. M.
Published: (1989)

Extension of Ko straight-beam displacement theory to deformed shape predictions of slender curved structures /
by: William L. Ko
Published: (2011)

Passive damping concepts for tubular beams with partial rotational and translational end restraints /
by: Razzaq, Zia
Published: (1991)

Micromechanics analysis of space simulated thermal deformations and stresses in continuous fiber reinforced composites /
by: Bowles, David E.
Published: (1990)

Structural analysis of a thermal insulation retainer assembly /
by: Greene, William H.
Published: (1989)

Structural analysis of a thermal insulation retainer assembly /
by: Greene, William H.
Published: (1989)

Adaptive unstructured meshing for thermal stress analysis of built-up structures /
by: Dechaumphai, Pramote
Published: (1992)

Influence of cooling hole geometry and material conductivity on the thermal response of cooled silicon nitride plate /
by: Abdul-Aziz, Ali, et al.
Published: (2002)

Normalization and implementation of three gravitational acceleration models /
by: Eckman, Randy A., et al.
Published: (2016)

Buckling test results and preliminary test and analysis correlation from the 8-foot-diameter orthogrid-stiffened cylinder test article TA02 : test dates: 3-6 February 2009 /
by: Hilburger, Mark W. (Mark William)
Published: (2017)

Multi-level experimental and analytical evaluation of two composite energy absorbers /
by: Jackson, Karen E.
Published: (2015)

Effect of layer-graded bond coats on edge stress concentration and oxidation behavior of thermal barrier coatings /
by: Zhu, Dongming, et al.
Published: (1998)

Design considerations for thermally insulating structural sandwich panels for hypersonic vehicles /
by: Blosser, Max L.
Published: (2016)

Thermostructural analysis of the SOFIA fine field and wide field imagers subjected to convective thermal shock /
by: Kostyk, Christopher B.
Published: (2012)

Design, fabrication, and tests of a metallic shell tile thermal protection system for space transportation /
by: MacConochie, Ian O.
Published: (1989)

Thermal expansion of vacuum plasma sprayed coatings /
by: Raj, S. V.
Published: (2010)

Thermostructural behavior of a hypersonic aircraft sandwich panel subjected to heating on one side /
by: Ko, William L.
Published: (1997)

Mechanical- and thermal-buckling behavior of rectangular plates with different central cutouts /
by: Ko, William L.
Published: (1998)

Residual stresses in thermal barrier coatings for a Cu-8Cr-4Nb substrate system /
by: Ghosn, Louis J., et al.
Published: (2002)