Computational implementation of a thermodynamically based work potential model for progressive microdamage and transverse cracking in fiber-reinforced laminates

Failure criterion of glass fabric reinforced plastic laminates /
by: Haga, Osamu
Published: (1986)

A three dimensional thermodynamically based function for the progressive failure of unidirectional composites /
by: Huang, H. Sam, et al.
Published: (2019)

Numerical implementation of a multiple-ISV thermodynamically-based work potential theory for modeling progressive damage and failure in fiber-reinforced laminates /
by: Pineda, Evan J.
Published: (2011)

Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures /
by: Lissenden, Cliff Jesse, et al.
Published: (1998)

Improved compression molding technology for continuous fiber reinforced composite laminates : Part 2: AS-4/Polyimidesulfone prepreg system /
Published: (1991)

Failure mechanisms of laminates transversely loaded by bolt push-through /
by: Waters, William Allen
Published: (1985)

Composite laminate tailoring with probabilistic constraints and loads /
by: Thanedar, P. B.
Published: (1990)

Influence of shear stiffness degradation on crack paths in uni-directional composite laminates /
by: Satyanarayana, Arunkumar, et al.
Published: (2017)

Development of curved-plate elements for the exact buckling analysis of composite plate assemblies including transverse-shear effects /
by: McGowan, David M.
Published: (1999)

A thermodynamically consistent damage model for advanced composites /
Published: (2006)

An improved compression molding technology for continuous fiber reinforced composite laminate : Part 1: AS-4/LaRC-TPI 1500 (HFG) prepreg system /
by: Hou, T. H.
Published: (1991)

Investigating delamination migration in composite tape laminates /
by: Ratcliffe, James G., et al.
Published: (2014)

Reliability analysis of continuous fiber composite laminates /
by: Thomas, David J.
Published: (1990)

On processing development for fabrication of fiber reinforced composite, II /
by: Hou, T. H.
Published: (1989)

On processing development for fabrication of fiber reinforced composite, II /
by: Hou, T. H.
Published: (1989)

Oxygen diffusion and reaction kinetics in continuous fiber ceramic matrix composites /
by: Halbig, Michael C., 1946-
Published: (1999)

Fatigue damage in notched composite laminates under tension-tension cyclic loads /
Published: (1985)

Effect of boron on intergranular hot cracking of Ni-Cr-Fe superalloys containing niobium /
by: Thompson, R. G.
Published: (1990)

Observation of intralaminar cracking in the edge crack torsion specimen /
by: Czabaj, Michael W., et al.
Published: (2013)

A new look at numerical analyses of free-edge stresses in composite laminates /
by: Raju, I. S., et al.
Published: (1980)

Short-wavelength buckling and shear failures for compression-loaded composite laminates /
by: Shuart, Mark J.
Published: (1985)

An Approximate solution and master curves for buckling of symmetrically laminated composite cylinders /
by: Nemeth, Michael P.
Published: (2013)

Normalization of impact energy by laminate thickness for compression after impact testing /
by: Nettles, A. T. (Alan T.), et al.
Published: (2013)

Comparison of open-hole compression strength and compression after impact strength on carbon fiber/epoxy laminates for the Ares I composite interstage /
by: Hodge, A. J.
Published: (2011)

Effect of stress concentrations in composite structures : progress report /
by: Babcock, Charles D.
Published: (1985)

Investigation of micro-scale architectural effects on damage of composites /
by: Stier, Bertram
Published: (2015)

The effects of titania on selected electrical and mechanical properties of hafnia-rich mixes oxides in the system hafnia-zircon ia-titania /
by: Staszak. P. R.
Published: (1988)

Stress waves in transversely isotropic media : the homogeneous problem /
by: Marques, Elizabeth R. C., et al.
Published: (1986)

Fracture mechanics of matrix cracking and delamination in glass/epoxy laminates /
by: Caslini, M., et al.
Published: (1986)

Interlaminar fracture characterization : a current review /
by: Martin, Roderick H.
Published: (1991)

Innovative design of composite structures : the use of curvilinear fiber format in composite structure design /
by: Hyer, M. W.
Published: (1990)

Prediction of composite laminate fracture : micromechanics and progressive fracture /
by: Gotsis, Pascal K., et al.
Published: (1996)

Experimental and analytical study of ceramic-coated turbine-tip shroud seals for small turbine engines /
Published: (1985)

Effects of thickness and ply orientation on buckling of laminated plates /
by: Jegley, Dawn C.
Published: (1986)

Dynamic shape reconstruction of three-dimensional frame structures using the inverse finite element method /
Published: (2011)

Characterization of failure processes in tungsten copper composites under fatigue loading conditions /
by: Kim, Yŏng-suk
Published: (1989)