Improvement of GRCop-84 through the addition of zirconium /

Tensile and creep property characterization of potential Brayton cycle impeller and duct materials /
by: Gabb, Timothy P.
Published: (2006)

Thermomechanical behavior of advanced SiC fiber multifilament tows /
by: Yun, Hee Mann, et al.
Published: (1997)

Realistic subscale evaluations of the mechanical properties of advanced disk superalloys /
by: Gabb, Timothy Paul, 1958-
Published: (2003)

A comparison of tension and compression creep in a polymeric composite and the effects of physical aging on creep /
by: Gates, Thomas S., 1959-, et al.
Published: (1996)

Realistic subscale evaluations of the mechanical properties of advanced disk superalloys /
Published: (2003)

Viscoelastic response of the titanium alloy Ti-6-4 : experimental identification of time- and rate-dependent reversible and irreversible deformation regions /
by: Lerch, Bradley A., et al.
Published: (2014)

Thermomechanical behavior of plasma-sprayed ZrO₂-Y₂O₃ coatings influenced by plasticity, creep and oxidation /
Published: (1987)

Microstructural and material quality effects on rolling contact fatigue of highly elastic intermetallic NiTi ball bearings /
by: DellaCorte, Christopher
Published: (2017)

Creep and rupture strength of an advanced CVD SiC fiber /
by: Goldsby, Jon C., et al.
Published: (1997)

Evaluation of aluminum alloy 2050-T84 microstructure and mechanical properties at ambient and cryogenic temperatures /
Published: (2011)

Mechanical properties of pure nickel alloys after long term exposures to LiOH and vacuum at 775 K /
by: Whittenberger, J. Daniel (John Daniel)
Published: (1990)

Experimental creep life assessment for the Advanced Stirling Convertor heater head /
Published: (2010)

Creep resistance of disk alloy CH98 with tungsten and niobium additions /
by: Gayda, John
Published: (2003)

Effects of microstructural parameters on creep of nickel-base superalloy single crystals /
by: MacKay, Rebecca A., et al.
Published: (2013)

Structural benchmark creep testing for Microcast MarM-247 advanced Stirling converter E2 heater head test article SN18 /
by: Krause, David L., et al.
Published: (2013)

Alloy design challenge : development of low density superalloys for turbine blade applications /
Published: (2009)

Effects of fusion tack welds on self-reacting friction stir welds /
by: Nunes, A. C.
Published: (2012)

Precipitation strengthened high strength, high conductivity Cu-Cr-Nb alloys produced by chill block melt spinning /
by: Ellis, David L.
Published: (1989)

Atomistic simulations of Ti additions to NiAl /
by: Bozzolo, G. (Guillermo)
Published: (1997)

Charpy impact energy and microindentation hardness of 60-NITINOL /
by: Stanford, Malcolm K.
Published: (2012)

Processing issues for preliminary melts of the intermetallic compound 60-NITINOL /
by: Stanford, Malcolm K., et al.
Published: (2012)

An introduction to the BFS method and its use to model binary NiAl alloys /
by: Bozzolo, G. (Guillermo)
Published: (1998)

The tensile properties of advanced nickel-base disk superalloys during quenching heat treatments /
Published: (2001)

Annealing effects on creep and rupture of polycrystalline alumina-based fibers /
by: Goldsby, Jon C.
Published: (1998)

Sources of variation in creep testing /
by: Loewenthal, William S.
Published: (2011)

The effects of fiber orientation and adhesives on tensile properties of carbon fiber reinforced polymer matrix composite with embedded nickel-titanium shape memory alloys /
by: Quade, Derek J.
Published: (2017)

Nickel-titanium alloys : corrosion "proof" alloys for space bearing, components and mechanism applications /
by: DellaCorte, Christopher
Published: (2010)

Elevated temperature tension, compression, and creep-rupture behavior of [001]-oriented single crystal superalloy PWA 1480 /
by: Hebsur, Mohan G.
Published: (1987)

A creep model for metallic composites based on matrix testing : application to Kanthal composites /
Published: (1990)

Constitutive modeling for isotropic materials (HOST) : third annual status report /
Published: (1986)

Determination of the gaseous hydrogen ductile-brittle transition in copper-nickel alloys /
Published: (1985)

Thermophysical properties of 60-NITINOL for mechanical component applications /
by: Stanford, Malcolm K.
Published: (2012)

Macroscopic and microstructural aspects of the transformation behavior in a polycrystalline NiTi shape memory alloy /
by: Benafan, Othmane
Published: (2013)

Comparison of the thermal expansion behavior of several intermetallic silicide alloys between 293 and 1523 K /
by: Raj, Sai V.
Published: (2014)

Stress versus temperature dependent activation energies in creep /
by: Freed, Alan David
Published: (1990)

Effects of state recovery on creep buckling under variable loading /
by: Robinson, D. N., et al.
Published: (1986)