Cover Image

Gear mesh loss-of-lubrication experiments and analytical simulation /

Bibliographic Details
Main Author:	Handschuh, Robert F.
Corporate Authors:	NASA Glenn Research Center, AHS Forum and Technology Display
Other Authors:	Polly, Joseph, Morales, Wilfredo
Format:	Government Document Conference Proceeding eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, [2011]
Series:	NASA technical memorandum ; 2011-217106.
Subjects:	Gears. Greases. Lubricants. Loads (forces) Heat transfer. Friction factor. Failure. Lubrication. High temperature.
Online Access:	https://purl.fdlp.gov/GPO/gpo24045

Similar Items

Wear of spur gears having a dithering motion and lubricated with a perfluorinated polyether grease /
by: Krantz, Timothy
Published: (2007)

Lubricant effects on bearing life /
by: Zaretsky, Erwin V.
Published: (1986)

Tribological evaluation of candidate gear materials operating under light loads in highly humid conditions /
by: DellaCorte, Christopher, et al.
Published: (2015)

High pressure angle gears : preliminary testing results /
by: Handschuh, Robert F.
Published: (2010)

The effect of composition on the surface finish of PS400 : a new high temperature solid lubricant coating /
Published: (2010)

An experimental investigation of the influence of the lubricant viscosity and additives on gear wear /
by: Krantz, T. L. (Timothy L.)
Published: (2005)

Self-lubricating polymer composites and polymer transfer film lubrication for space applications /
by: Fusaro, Robert L.
Published: (1990)

Effects of hydrocarbon-based grease on rapid prototype material used for grease retention shrouds /
by: Zakrajsek, Andrew J.
Published: (2010)

On the correlation of specific film thickness and gear pitting life /
by: Krantz, T. L. (Timothy L.)
Published: (2015)

The effect of compositional tailoring on the thermal expansion and tribological properties of PS300 : a solid lubricant composite coating /
by: DellaCorte, Christopher, et al.
Published: (1996)

High temperature solid lubricant materials for heavy duty and advanced heat engines /
by: DellaCorte, Christopher
Published: (1994)

Evaluation of newly formulated Dow Corning 321 dry film lubricant final test report /
by: Cook, M.
Published: (1989)

Durability evaluation of selected solid lubricating films /
by: Miyoshi, Kazuhisa
Published: (2001)

The evaluation of a modified chrome oxide based high temperature solid lubricant coating for foil gas bearings /
by: DellaCorte, Christopher
Published: (1998)

Engagement of metal debris into a gear mesh /
by: Handschuh, Robert F.
Published: (2010)

Lubrication fundamentals /
by: Hamrock, Bernard J.
Published: (1981)

A systems approach to the solid lubrication of foil air bearings for oil-free turbomachinery /
by: DellaCorte, Christopher, et al.
Published: (2002)

A systems approach to the solid lubrication of foil air bearings for oil-free turbomachinery /
by: DellaCorte, Christopher
Published: (2002)

Tribology : the story of lubrication and wear /
Published: (1985)

NASA PS400 : a new high temperature solid lubricant coating for high temperature wear applications /
by: DellaCorte, C.
Published: (2009)

Test facility simulation results for aerospace loss-of-lubrication of spur gears /
by: Handschuh, Robert F., et al.
Published: (2014)

Spectroscopic analysis of perfluoropolyether lubricant degradation during boundary lubrication /
by: Herrera-Fierro, Pilar, et al.
Published: (1996)

The role of silver in self-lubricating coatings for use at extreme temperatures /
by: Sliney, Harold E.
Published: (1985)

Thermal processing effects on the adhesive strength of PS304 high temperature solid lubricant coatings /
by: DellaCorte, Christopher
Published: (2001)

Phase I report on space station long term lubrication analysis.
Published: (1990)

Bearing elastohydrodynamic lubrication : a complex calculation made simple /
by: Zaretsky, Erwin V.
Published: (1990)

Experimental investigation of shrouding on meshed spur gear windage power loss /
by: Delgado, Irebert, R., et al.
Published: (2017)

Enhancement of perfluoropolyether boundary lubrication performance /
by: Jones, W. R, et al.
Published: (1996)

Tribological properties of polymer films and solid bodies in a vacuum environment /
by: Fusaro, Robert L.
Published: (1987)

The MillSOT--a spiral orbit tribometer on a milling machine /
by: Pepper, Stephen V., 1937-
Published: (2014)

Fundamental aspects of polyimide dry film and composite lubrication : a review /
by: Fusaro, Robert L.
Published: (1982)

An investigation of gear mesh failure prediction techniques /
by: Zakrajsek, James J.
Published: (1989)

Friction and wear of ion-beam-deposited diamondlike carbon on chemical-vapor-deposited, fine-grain diamond /
by: Miyoshi, Kazuhisa, et al.
Published: (1996)

Performance of jet- and inner-ring-lubricated 35-millimeter-bore ball bearings operating to 2.5 million DN /
by: Schuller, Fredrick T., et al.
Published: (1981)

Measurement of gear tooth dynamic friction /
by: Rebbechi, Brian, et al.
Published: (1996)

Tribological evaluation of PS300 : a new chrome oxide based solid lubricant coating sliding against A1₂O₃ from 25 to 650°C /
by: DellaCorte, Christopher, et al.
Published: (1996)

Comparison between oil-mist and oil-jet lubrication of high-speed, small-bore, angular-contact ball bearings /
by: Pinel, Stanley I.
Published: (2001)

Comparison between oil-mist and oil-jet lubrication of high-speed, small-bore, angular-contact ball bearings /
by: Pinel, Stanley I., et al.
Published: (2001)

EHL transition temperature measurements on a Geostationary Operational Environmental Satellite (GOES) filter wheel bearing /
Published: (2001)

In-situ, on-demand lubrication system for space mechanisms /
by: Marchetti, Mario
Published: (2002)