Design, optimization, and evaluation of integrally-stiffened Al-2139 panel with curved stiffeners /

Skin-stiffener debond prediction based on computational fracture analysis /
by: Krueger, Ronald
Published: (2005)

Stability and dynamic analysis of a slender column with curved longitudinal stiffeners /
by: Lake, Mark S.
Published: (1989)

Influence of an asymmetric ring on the modeling of an orthogonally stiffened cylindrical shell /
by: Rastogi, Naveen
Published: (1994)

Failure mechanisms of laminates transversely loaded by bolt push-through /
by: Waters, William Allen
Published: (1985)

Fracture analysis of the FAA/NASA wide stiffened panels /
by: Seshadri, B. R.
Published: (1998)

Postbuckling delamination of a stiffened composite panel using finite element methods /
by: Natsiavas, S., et al.
Published: (1987)

Evaluation of the behavior of Technova Corporation rod-stiffened stitched compression specimens /
by: Dawn C. Jegley
Published: (2013)

Identifying and characterizing discrepancies between test and analysis results of compression-loaded panels /
by: Thornburgh, Robert P.
Published: (2005)

Abrasion behavior of aluminum and composite skin coupons, stiffened skins, and stiffened panels representative of transport airplane structures /
by: Jackson, Karen E.
Published: (1985)

Buckling test results from the 8-foot-diameter orthogrid-stiffened cylinder test article TA01 : test dates: 19-21 November 2008 /
by: Hilburger, Mark W. (Mark William), et al.
Published: (2015)

Global/local stress analysis of composite panels /
by: Ransom, Jonathan B.
Published: (1989)

Enhancements of tow-steering design techniques : design of rectangular panel under combined loads /
by: Tatting, Brian F.
Published: (2005)

Combined load test fixture /
by: Baker, Donald J.
Published: (2010)

Experimental behavior of fatigued single stiffener PRSEUS specimens /
by: Jegley, Dawn C.
Published: (2009)

Longitudinal weld land buckling in compression-loaded orthogrid cylinders /
by: Thornburgh, Robert P.
Published: (2010)

Cyclic cryogenic thermal-mechanical testing of an X-33/RLV liquid oxygen tank concept /
by: Rivers, H. Kevin
Published: (1999)

Normalization of impact energy by laminate thickness for compression after impact testing /
by: Nettles, A. T. (Alan T.), et al.
Published: (2013)

Quasi-static and dynamic analysis of composite panels : characterization and validation /
by: Ghezeljeh, Paria Naghipour
Published: (2019)

Simplification of fatigue test requirements for damage tolerance of composite interstage launch vehicle hardware /
by: Nettles, A. T. (Alan T.)
Published: (2010)

Optimal airframe synthesis for gust loads /
by: Hajela, Prabhat, 1956-
Published: (1986)

Free vibration of hexagonal panels simply supported at discrete points /
by: Wu, K. Chauncey
Published: (1991)

Buckling test results and preliminary test and analysis correlation from the 8-foot-diameter orthogrid-stiffened cylinder test article TA02 : test dates: 3-6 February 2009 /
by: Hilburger, Mark W. (Mark William)
Published: (2017)

Structure-property correlations in Al-Li alloy integrally stiffened extrusions /
by: Hales, Stephen J.
Published: (2001)

Edgewise compression testing of STIPS-0 (Structurally Integrated Thermal Protection System) /
by: Brewer, Amy R.
Published: (2011)

Resilient and corrosion-proof rolling element bearings made from superelastic Ni-Ti alloys for aerospace mechanism applications /
Published: (2011)

Evaluating daily load stimulus formulas in relating bone response to exercise /
by: Pennline, James A., et al.
Published: (2014)

Development of the Orion crew-service module umbilical retention and release mechanism /
by: Delap, Damon, et al.
Published: (2013)

A damage tolerance comparison of composite hat-stiffened and honeycomb sandwich structure for launch vehicle interstage applications /
by: Nettles, A. T. (Alan T.)
Published: (2011)

Development of curved-plate elements for the exact buckling analysis of composite plate assemblies including transverse-shear effects /
by: McGowan, David M.
Published: (1999)

Integrated structural/acoustic modeling of heterogeneous panels /
by: Bednarcyk, Brett A.
Published: (2012)

Simplified models for the study of postbuckled hat-stiffened composite panels /
by: Vescovini, Riccardo
Published: (2012)

Ultrasonic nondestructive evaluation of PRSEUS pressure cube article in support of load test to failure /
by: Johnston, Patrick H.
Published: (2013)

Mechanical testing of large thallium doped sodium iodide single crystals /
by: Lee, Henry M.
Published: (1986)

Mechanical testing of large thallium doped sodium iodide single crystals /
by: Lee, Henry M.
Published: (1986)

A torque, tension, and stress corrosion evaluation of high strength A286 bolts /
by: Montano, J. W.
Published: (1986)

A torque, tension, and stress corrosion evaluation of high strength A286 bolts /
by: Montano, J. W.
Published: (1986)