Cover Image

Combustion of lox with H₂₍g₎ under subcritical, critical and supercritical conditions (task 1) and experimental observation of dense spray and mixing of impinging jets (task 2) : semi-annual report /

Bibliographic Details
Corporate Authors:	Pennsylvania State University. Propulsion Engineering Research Center, George C. Marshall Space Flight Center
Other Authors:	Kuo, Kenneth K.
Format:	Government Document eBook
Language:	English
Published:	University Park, PA : Huntsville, Ala. : Propulsion Engineering Research Center, Pennsylvania State University ; NASA Marshall Space Flight Center, [1992]
Series:	NASA contractor report ; NASA CR-191222.
Subjects:	Cavitation flow. Combustion physics. Hydrogen. Impingement. Liquid oxygen. Mathematical models. Spray characteristics. Sprayers. Thermodynamic equilibrium.
Online Access:	https://purl.fdlp.gov/GPO/gpo23240

Similar Items

The structure of dilute combusting sprays /
by: Shuen, J.-S
Published: (1985)

Experimental investigation of water droplet impingement on airfoils, finite wings, and an S-duct engine inlet /
by: Papadakis, Michael
Published: (2002)

Experimental investigation of water droplet impingement on airfoils, finite wings, and an S-duct engine inlet /
Published: (2002)

Assessment of some atomization models used in spray calculations /
by: Raju, M. S.
Published: (2011)

Channel flow modeling of impingement cooling of a rotating turbine blade /
by: Koo, JaHye Jenny
Published: (1984)

Orion Service Module Reaction Control System plume impingement analysis using PLIMP/RAMP2 /
Published: (2009)

Water jet/spray measurement analysis /
by: Lala, G. Garland
Published: (1986)

Numerical modeling of spray combustion with an advanced VOF method /
Published: (1997)

LOX/Hydrocarbon combustion instability investigation /
by: Jensen, R. J.
Published: (1989)

LOX/hydrogen coaxial injector atomization test program /
by: Zaller, M.
Published: (1990)

Combustion characteristics in the transition region of liquid fuel sprays : final report, January 1983 - September 1985 /
by: Cernansky, N. P.
Published: (1986)

Independent Orbiter assessment : analysis of the hydraulics/water spray boiler subsystem /
by: Duval, J. D.
Published: (1986)

Risk assessment and scaling for the SLS LOx ET /
by: Osipov, Viatcheslav (Slava)
Published: (2012)

Advanced electric propulsion research, 1990 : annual report /
by: Monheiser, Jeffery M.
Published: (1991)

Microstructure and properties of thermally sprayed functionally graded coatings for polymeric substrates /
Published: (2003)

Current status of superheat spray modeling with NCC /
by: Raju, M. S.
Published: (2012)

Combustion performance and heat transfer characterization of lox/hydrocarbon type propellants : final report, volume I.
Published: (1983)

Morphology of zirconia particles exposed to D.C. arc plasma jet /
by: Zaplatynsky, Isidor
Published: (1987)

Oxides of nitrogen emissions from the combustion of monodisperse liquid fuel sprays /
by: Sarv, Hamid
Published: (1985)

The structural dynamics analysis of the main injector LOX inlet tee and its redesign /
by: Romano, E.
Published: (1989)

SSME LOX post flow analysis/fluid structure interaction.
by: Burke, R. W.
Published: (1989)

Nested subcritical flows within supercritical systems /
Published: (1985)

Nested subcritical flows within supercritical systems /
Published: (1985)

Liquid fuel spray processes in high-pressure gas flow /
by: Ingebo, Robert D.
Published: (1985)

Transition region ignition characteristics of N-heptane fuel sprays /
by: Danis, Allen M., 1955-, et al.
Published: (1985)

A study of cavitation-ignition bubble combustion /
by: Nguyen, Quang-Viet
Published: (2005)

Optimal substrate preheating model for thermal spray deposition of thermosets onto polymer matrix composites.
Published: (2003)

The effect of chine tires on nose gear water-spray characteristics of a twin-engine propjet airplane /
by: Yager, Thomas J., et al.
Published: (1975)

A theoretical and experimental study of turbulent particle-laden jets /
by: Shuen, J-S
Published: (1983)

Effect of layer-graded bond coats on edge stress concentration and oxidation behavior of thermal barrier coatings /
by: Zhu, Dongming, et al.
Published: (1998)

Space Shuttle main engine (SSME) LOX turbopump pump-end bearing analysis : final report.
Published: (1986)

Application of rapid prototyping and wire arc spray to the fabrication of injection mold tools : (MSFC Center Director's Discretionary Fund final report, project No. 99-05) /
by: Cooper, K. G.
Published: (2000)

Reacting multi-species gas capability for USM3D flow solver /
by: Frink, Neal T.
Published: (2012)

Elasticity effects on cavitation in a squeeze film damper undergoing noncentered circular whirl /
by: Brewe, David E.
Published: (1988)

Neutralizer and sample chamber for the Atomic Oxygen Simulation System (AOSS) /
by: Albridge, Royal G.
Published: (1992)

Sintering and creep behavior of plasma-sprayed zirconia and hafnia based thermal barrier coatings /
by: Zhu, Dongming, et al.
Published: (1998)

Effect of flow oscillations on cavity drag and a technique for their control /
by: Gharib, M.
Published: (1985)

Thermodynamic data for fifty reference elements /
by: McBride, Bonnie J.
Published: (2001)

Guide for oxygen hazards analyses on components and systems /
by: Stoltzfus, Joel M., et al.
Published: (1996)

Thermal expansion of vacuum plasma sprayed coatings /
by: Raj, S. V.
Published: (2010)