Industry performance of relief valves at U.S. commercial nuclear power plants through 2007 /
| Main Author: | Wieman, T. E. |
|---|---|
| Corporate Authors: | U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research, Idaho National Laboratory |
| Other Authors: | Gentillon, C. D. (Cynthia Dolan), Brady, B. M. |
| Format: | Government Document eBook |
| Language: | English |
| Published: |
[Washington, D.C.] :
U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research,
[2011]
|
| Subjects: | |
| Online Access: | https://purl.fdlp.gov/GPO/gpo14592 |
Similar Items
A study of air-operated valves in U.S. nuclear power plants /
by: Rothberg, O. (Owen)
Published: (2000)
by: Rothberg, O. (Owen)
Published: (2000)
Valves for power plant development and testing : international conference, 4-6 April 1989, University of Southampton /
Published: (1989)
Published: (1989)
Problems with Copes-Vulcan pressurized power-operated relief valves.
Published: (1994)
Published: (1994)
Unexpected opening of multiple safety relief valves.
Published: (1996)
Published: (1996)
Inoperability of power-operated relief valves masked by downstream indications during testing.
Published: (1996)
Published: (1996)
The safety relief valve handbook : design and use of process safety valves to ASME and international codes and standards /
by: Hellemans, Marc
Published: (2009)
by: Hellemans, Marc
Published: (2009)
The safety relief valve handbook : design and use of process safety valves to ASME and international codes and standards /
by: Hellemans, Marc
Published: (2009)
by: Hellemans, Marc
Published: (2009)
Air actuator and supply air regulator problems in Copes-Vulcan pressurizer power-operated reliel valves.
Published: (1995)
Published: (1995)
Broken retaining block studs on Anchor Darling check valves.
Published: (1988)
Published: (1988)
Instrument failure causes opening of PORV and block valve.
Published: (1980)
Published: (1980)
Failures of main steam isolation valves.
Published: (1988)
Published: (1988)
Changes In pressurizer safety valve setpoints before installation.
Published: (1991)
Published: (1991)
Recent operating experience associated with pressurizer and main steam safety/relief valve lift setpoints.
Published: (2006)
Published: (2006)
Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)
Published: (1996)
Excessive nitrogen supply pressure actuates safety-relief valve operation to cause reactor depressurization.
Published: (1980)
Published: (1980)
The safety relief valve handbook : design and use of process safety valves to ASME and international codes and standards /
by: Hellemans, Marc
Published: (2009)
by: Hellemans, Marc
Published: (2009)
Pressurizer safety valve reliability.
Published: (1986)
Published: (1986)
Failures to identify containment leakage due to inadequate local testing of BWR vacuum relief system valves.
Published: (1986)
Published: (1986)
Malfunction of Borg-Warner bolted bonnet check valves caused by failure of the swing arm.
Published: (1990)
Published: (1990)
Reliability of main steam safety valves.
Published: (1986)
Published: (1986)
The safety relief valve handbook : design and use of process safety valves to ASME and international codes and standards /
by: Hellemans, Marc
Published: (2009)
by: Hellemans, Marc
Published: (2009)
Safety relief valves : presented at the third National Congress on Pressure Vessels and Piping, San Francisco, California, June 24-29, 1979 /
Published: (1979)
Published: (1979)
Failure of safety/relief valves to open at a BWR.
Published: (1982)
Published: (1982)
Potential problems with Crosby safety relief valves used on diesel generator air start receiver tanks.
Published: (1990)
Published: (1990)
Testing and analysis of safety/relief valve performance : papers presented at the ASME Winter Annual Meeting, Phoenix, Arizona, November 15-19, 1982, the Second International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Santa Barbara, California, January 11-14, 1983, the 4th National Congress on Pressure Vessel and Piping Technology, Portland, Oregon, June 19-24, 1983 /
Published: (1983)
Published: (1983)
Failure of safety/relief valves to open at BWR--interim report.
Published: (1983)
Published: (1983)
Inaccuracy of safety valve set pressure determinations using assist devices.
Published: (1994)
Published: (1994)
Systems interaction event resulting in reactor system safety relief valve opening following a fire-protection deluge system malfunction.
Published: (1985)
Published: (1985)
Setpoint testing of pressurizer safety valves with filled loop seals using hydraulic assist devices.
Published: (1988)
Published: (1988)
Main steam safety valve setpoint variation as a result of thermal effects.
Published: (1996)
Published: (1996)
Operating problems with solenoid operated valves at nuclear power plants.
Published: (1986)
Published: (1986)
Failure of safety/relief valves to open at BWR--final report.
Published: (1983)
Published: (1983)
Pressurizer safety valve lift setpoint shift.
Published: (1989)
Published: (1989)
Westinghouse motor-operated valve performance data supplied to nuclear power plant licensees.
Published: (1992)
Published: (1992)
Crosby relief valve setpoint drift problems caused by corrosion of the guide ring.
Published: (1998)
Published: (1998)
Lessons learned from U.S. Nuclear Regulatory Commission inspections of design-basis capability of power-operated valves at nuclear power plants.
Published: (2021)
Published: (2021)
Thermostatic radiator valve evaluation /
by: Dentz, Jordan, et al.
Published: (2015)
by: Dentz, Jordan, et al.
Published: (2015)
Velan swing check valves.
Published: (1981)
Published: (1981)
Target rock two-stage SRV setpoint drift update.
Published: (1988)
Published: (1988)
Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)
Published: (1990)