Cover Image

Mach 0.3 Burner Rig Facility at the NASA Glenn Materials Research Laboratory /

Bibliographic Details
Corporate Author:	NASA Glenn Research Center
Other Authors:	Fox, Dennis S.
Format:	Government Document eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, [2011]
Series:	NASA technical memorandum ; 216986.
Subjects:	High temperature. Oxidation. Corrosion. Degradation. Burners. Thermal cycling tests. Erosion. Jet engine fuels.
Online Access:	https://purl.fdlp.gov/GPO/gpo14581

Similar Items

Burner rig with an unattached duct for evaluating the erosion resistance of thermal barrier coatings /
by: Miller, Robert A.
Published: (2011)

A CFD-based study of the feasibility of adapting an erosion burner rig for examining the effect of CMAS deposition/corrosion on environmental barrier coatings /
by: Miller, Robert A., et al.
Published: (2015)

Natural gas/oxygen burner rig at the NASA Glenn Materials Research Laboratory /
by: Fox, Dennis S.
Published: (2022)

Cyclic oxidation and hot corrosion of NiCrY-coated disk superalloys /
by: Gabb, Timothy Paul, 1958-
Published: (2016)

Burner liner thermal/structural load modeling /
by: Maffeo, R.
Published: (1984)

Mechanical properties of degraded PMR-15 resin /
by: Tsuji, Luis C. (Luis Christophe), 1974-, et al.
Published: (1998)

Extended operation of Stirling convertors at NASA Glenn Research Center /
by: Oriti, Salvatore M.
Published: (2012)

Arcjet cathode phenomena /
by: Curran, Francis M.
Published: (1989)

Arcjet cathode phenomena /
by: Curran, Francis M.
Published: (1989)

Overview of multilayer metal insulation development for small stirling converters at NASA Glenn Research Center.
by: Goodell, Daniel D.
Published: (2020)

Ribbon-burner simulation of the T-700 turbine shroud section for ceramic-lined seals research /
Published: (1985)

NASA Glenn Research Center support of the Advanced Stirling Radioisotope Generator project /
by: Wilson, Scott D. (Scott Dean), et al.
Published: (2015)

The oxidation and corrosion of ODS alloys /
by: Lowell, Carl E.
Published: (1990)

Computational simulation of high temperature metal matrix composites cyclic behavior /
by: Chamis, C. C. (Christos C.)
Published: (1989)

Computational simulation of high temperature metal matrix composites cyclic behavior /
by: Chamis, C. C. (Christos C.)
Published: (1989)

Composite erosion by computational simulation /
by: Chamis, C. C. (Christos C.)
Published: (2006)

The lattice and thermal radiation conductivity of thermal barrier coatings : models and experiments /
by: Zhu, Dongming
Published: (2010)

Dynamic power convertor development for radioisotope power systems at NASA Glenn Research Center /
by: Oriti, Salvatore M., et al.
Published: (2018)

Aerospace ceramic materials : thermal, environmental barrier coatings and SiC/SiC ceramic matrix composites for turbine engine applications /
by: Zhu, Dongming
Published: (2018)

Diffusivity in alumina scales grown on Al-MAX phases /
by: Smialek, James L.
Published: (2014)

NASA PS400 : a new high temperature solid lubricant coating for high temperature wear applications /
by: DellaCorte, C.
Published: (2009)

Simultaneous laser raman-rayleigh-LIF measurements and numerical modeling results of a lifted turbulent H₂/N₂ jet flame in a vitiated coflow /
Published: (2002)

Low temperature testing of a radiation hardened CMOS 8-bit flash analog-to-digital (A/D) converter /
Published: (2001)

Doppler global velocimetry at NASA Glenn Research Center : system discussion and results /
by: Lant, Christian T.
Published: (2003)

Small radioisotope power system at NASA Glenn Research Center /
Published: (2012)

Design and performance optimizations of advanced erosion-resistant low conductivity thermal barrier coatings for rotorcraft engines /
by: Zhu, Dongming
Published: (2012)

Flight set 360L001 (STS-26) igniter, post flight, final report.
by: Hale, E. J.
Published: (1990)

Effect of layer-graded bond coats on edge stress concentration and oxidation behavior of thermal barrier coatings /
by: Zhu, Dongming, et al.
Published: (1998)

High-data-rate quadrax cable microwave characterization at the NASA Glenn Structural Dynamics Laboratory /
by: Theofylaktos, Onoufrios, et al.
Published: (2012)

Experimental clean combustor program : phase II : final report /
by: Roberts, R.
Published: (1976)

Sputtering erosion measurement on boron nitride as a hall thruster material /
Published: (2002)

Sputtering erosion measurement on boron nitride as a hall thruster material /
by: Britton, Melissa
Published: (2002)

Temperature and species measurements of combustion produced by a 9-point lean direct injector /
by: Tedder, Sarah A., et al.
Published: (2013)

Low conductivity thermal barrier coatings /
by: Zhu, Dongming
Published: (2005)

Gas-jet and tangent-slot film cooling tests of a 12.5⁰ cone at Mach number of 6.7 /
by: Nowak, Robert J.
Published: (1988)

Embrittlement of MISSE 5 polymers after 13 months of space exposure /
by: Guo, Aobo
Published: (2012)

Attenuation of scattered thermal energy atomic oxygen /
Published: (2011)

Stirling convertor extended operation testing and data analysis at Glenn Research Center /
Published: (2010)

Independent effects of Reynolds number and Mach number on aerodynamics of an iced swept wing /
by: Broeren, Andy P.
Published: (2019)

The effect of heating on the degradation of ground laboratory and space irradiated Teflon ® FEP /
by: De Groh, Kim K., et al.
Published: (2002)