Age-related constant support degradation.

Failure of Rockwell-Edward main steam isolation valves.
Published: (1981)

Significant unexpected erosion of feedwater lines.
Published: (1987)

Crack-like indications at dents/dings and in the freespan region of thermally treated alloy 600 steam generator tubes.
Published: (2013)

Use of inappropriate guidelines and criteria for nuclear piping and pipe support evaluation and design.
Published: (1995)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)

Pipe support anchors installed improperly.
Published: (2010)

Steam generator channel head and tubesheet degradation.
Published: (2013)

Fracture toughness and crack growth rates of irradiated austenitic stainless steels /
by: Chopra, O. K.
Published: (2003)

Fracture toughness and crack growth rates of irradiated austenitic stainless steels /
by: Chopra, O. K.
Published: (2003)

Cracking indications in thermally treated alloy 600 steam generator tubes.
Published: (2008)

Testing and operations-induced degradation of 3-stage Target Rock safety/relief valves.
Published: (2018)

Analysis of JNES seismic tests on degraded piping /
Published: (2010)

Fatigue crack flaw tolerance in nuclear power plant piping : a basis for improvements to ASME code section XI Appendix L /
Published: (2007)

A report on a failure of 100% paved corrugated metal pipe in Salinas, California /
by: Heyward, Harvey C.
Published: (1959)

Risk-informed assessment of degraded buried piping systems in nuclear power plants /
Published: (2005)

Pipe whip restraints.
Published: (1985)

Alleged falsification of certifications and alteration of markings on piping, valves, and fittings.
Published: (1985)

Failure of condensate piping because of erosion-corrosion at a flow-straightening device.
Published: (1995)

Effects of thermal aging on fracture toughness and charpy-impact strength of stainless steel pipe welds /
Published: (1996)

Degradation of containment isolation capability by a high-energy line break.
Published: (1989)

Valve stem corrosion failures.
Published: (1985)

Erosion-corrosion of PWR feedwater piping survey of experience, design, water chemistry, and materials /
by: Jonas, Otakar
Published: (1988)

Detection and monitoring of sudden and/or rapidly increasing primary-to-secondary leakage.
Published: (1988)

Supplemental information to Generic Letter 95-03 "Circumferential cracking of steam generator tubes".
Published: (1995)

Overloading of structural elements due to pipe support loads.
Published: (1979)

Pressure vessels and piping design, analysis, and severe accidents : presented at the 1996 ASME Pressure Vessels and Piping Conference, Montreal, Quebec, Canada, July 21-26, 1996 /
Published: (1996)

Unit startup with degraded high pressure safety injection system.
Published: (1986)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Intergranular stress corrosion cracking leading to steam generator tube failure.
Published: (1984)

IGSCC in BWR plants.
Published: (1984)

Stress corrosion cracking in PWR steam generator tubes.
Published: (1990)

Potential blockage by debris of safety system piping which is not used during normal operation or tested during surveillances.
Published: (1996)

Relaxation in arbitrary intermediate pipe rupture requirements.
Published: (1987)

Unexpected restriction to thermal growth of reactor coolant piping.
Published: (1992)

Thimble tube thinning in Westinghouse reactors.
Published: (1987)