Cover Image

Failures of motor-operated valves due to degraded stem lubricant.

Bibliographic Details
Corporate Authors:	U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission. Office of Nuclear Material Safety and Safeguards
Format:	Government Document eBook
Language:	English
Published:	Washington, DC : U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation : U.S. Nuclear Regulatory Commission, Office of Nuclear Material Safety and Safeguards, [2010]
Series:	NRC information notice ; 2010-03.
Subjects:	Nuclear power plants > Piping > Valves.
Online Access:	https://purl.fdlp.gov/GPO/LPS125574

Similar Items

Valve stem corrosion failures.
Published: (1985)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Motor-operated valve inoperable due to stem-disc separation.
Published: (2012)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Valve-stem failure caused by embrittlement.
Published: (1992)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Vibration-induced degradation and failure of safety-related valves.
Published: (2006)

Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Potential common cause failure of motor-operated valves as a result of stem nut wear.
Published: (2006)

Effects of changing valve motor-operator switch settings.
Published: (1986)

Check valve failures.
Published: (1981)

AnchorDarling double disc gate valve check pin and stem-disc separation failures.
Published: (2017)

Failure of air check valves to seat.
Published: (1985)

Testing and operations-induced degradation of 3-stage Target Rock safety/relief valves.
Published: (2018)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Motor-operated valve performance issues.
Published: (1996)

Consideration of the stem rejection load in calculation of required valve thrust.
Published: (1992)

Failures of nut-locking devices in check-valves.
Published: (1993)

Failures of main steam isolation valves.
Published: (1988)

Failures of Rockwell International globe valves.
Published: (1984)

Inadequacies in the design of DC motor-operated valves.
Published: (1988)

Results of validation testing of motor-operated valve diagnosis equipment.
Published: (1992)

Pressure locking of motor-operated flexible wedge gate valves.
Published: (1992)

Preliminary results of validation testing of motor-operated valve diagnostic equipment.
Published: (1991)

Failure of check and stop check valves subjected to low flow conditions.
Published: (1986)

Failures of air-operated valves affecting safety-related systems.
Published: (1988)

Limitorque valve geared limit switch lubricant.
Published: (1979)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Failure of Rockwell-Edward main steam isolation valves.
Published: (1981)

Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)

Motor brakes on valve actuator motors.
Published: (1993)

Solenoid-operated valve failures resulted in turbine overspeed.
Published: (1991)

Safety-related (1) motor-operated valve testing and surveillance results of the public workshops.
Published: (1989)

Failures to identify containment leakage due to inadequate local testing of BWR vacuum relief system valves.
Published: (1986)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Failure of safety injection valves to operate against differential pressure.
Published: (1981)

Failure of motor-operated valve electric power train due to sheared or dislodged motor pinion gear key.
Published: (1994)

Failure of DC motor-operated valves to develop rated torque because of improper cable sizing.
Published: (1989)