Massively-parallel direct numerical simulation of gas turbine endwall film-cooling conjugate heat transfer /
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Thesis eBook |
| Language: | English |
| Published: |
[College Station, Tex.] :
[Texas A&M University],
[2011]
|
| Subjects: | |
| Online Access: | Link to OAK Trust copy |
| Abstract: | Improvements to gas turbine efficiency depend closely on cooling technologies, as efficiency increases with turbine inlet temperature. To aid in this process, simulations that consider real engine conditions need to be considered. The first step towards this goal is a benchmark study using direct numerical simulations to consider a single periodic film cooling hole that characterizes the error in adiabatic boundary conditions, a common numerical simplification. Two cases are considered: an adiabatic case and a conjugate case. The adiabatic case is for validation to previous work conducted by Pietrzyk and Peet. The conjugate case considers heat transfer in the solid endwall in addition to the fluid, eliminating any simplified boundary conditions. It also includes an impinging jet and plenum, typical of actual endwall configurations. The numerical solver is NEK5000 and the two cases were run at 504 and 128 processors for the adiabatic and conjugate cases respectively. The approximate combined time is 100,000 CPU hours. In the adiabatic case, the results show good agreement for average velocity profiles but over prediction of the film cooling effectiveness. A convergence study suggests that there may be an area of unresolved flow, and the film cooling momentum flux may be too high. Preliminary conjugate results show agreement with velocity profiles, and significant differences in cooling effectiveness. Both cases will need to be refined near the cooling hole exit, and another convergence study done. The results from this study will be used in a larger case that considers an actual turbine vane and film cooling hole arrangement with real engine conditions. |
|---|---|
| Item Description: | "Major Subject: Mechanical Engineering" Title from author supplied metadata (automated record created 2011-02-28 11:02:00). Electronic resource. |
| Physical Description: | 1 online resource. |
| Bibliography: | Includes bibliographical references. |