Reactor coolant pressure boundary leakage attributable to propagation of cracking in reactor vessel nozzle welds.

Loss of reactor coolant inventory and associated potential for loss of emergency mitigation functions while in a shutdown condition.
Published: (1998)

Aluminum chemistry in a prototypical post-loss-of-coolant-accident, pressurized-water-reactor containment environment /
Published: (2006)

Loss of residual heat removal (RHR) while the reactor coolant system (RCS) is partially filled.
Published: (1987)

Potential for loss of shutdown cooling while at low reactor coolant levels.
Published: (1990)

Undetected loss of reactor coolant.
Published: (1987)

Switchover to hot-leg injection following a loss-of-coolant accident in pressurized water reactors.
Published: (1993)

Potential for common-mode failure of high pressure safety injection pumps or release of reactor coolant outside containment during a loss-of-coolant accident.
Published: (1990)

Fire protection findings on loss of seal coolant to Westinghouse reactor coolant pumps.
Published: (2005)

Surface crack and subsurface indications in the weld of a reactor vessel head.
Published: (1990)

Cracking in pressurizer safety and relief nozzles and in surge line nozzle.
Published: (2004)

Crack in weld area of reactor coolant system hot leg piping at V.C. Summer.
Published: (2000)

BWR feedwater nozzle and control rod drive return line nozzle cracking (NUREG-0619).
Published: (1981)

Unisolatable reactor system coolant leak following repeated applications of leak sealant.
Published: (1993)

Potential for degradation of the emergency core cooling system and the containment spray system after a loss-of-coolant accident because of construction and protective coating deficiencies and foreign material in containment.
Published: (1998)

Possible sudden loss of RCS inventory during low coolant level operation.
Published: (1988)

Core shroud cracking at beltline region welds in boiling-water reactors.
Published: (1993)

Degraded ability to isolate the reactor coolant system from low-pressure coolant systems in BWRS.
Published: (1986)

Heat transfer processes during intermediate and large break loss-of-coolant accidents (LOCAs) /
by: Vojtek, I.
Published: (1986)

Loss of reactor coolant inventory and potential loss of emergency mitigation functions while in a shutdown condition.
Published: (1995)

Potential degradation of post loss-of-coolant recirculation capability as a result of debris.
Published: (1996)

Circumferential cracking in the stainless steel pressurized heater sleeves of pressurized water reactors.
Published: (2006)

Inadvertent reduction in primary coolant inventory in boiling water reactors during shutdown and startup.
Published: (1984)

Loss of decay heat removal due to loss of fluid levels in reactor coolant system.
Published: (1986)

Loss of high head safety injection emergency boration and reactor coolant makeup capability.
Published: (1982)

Through-wall circumferential cracking of reactor pressure vessel head control rod drive mechanism penetration nozzles at Oconee Nuclear Station, Unit 3.
Published: (2001)

Stress corrosion cracking in pressurized water reactor systems.
Published: (1984)

Investigations of the VVER-1000 Coolant Transient Benchmark Phase 1 with the coupled code system RELAP5/PARCS /
Published: (2009)

Recent operating experience on loss of reactor coolant inventory while In a shutdown condition.
Published: (1990)

Experimental measurements of pressure drop across sump screen debris beds in support of generic safety issue 191 /
Published: (2007)

Primary water stress corrosion cracking of high-chromium, nickel-base welds near dissimilar metal weld interfaces /
by: Alexandreanu, B.
Published: (2018)

Fuel fragmentation, relocation, and dispersal during the loss-of-coolant accident /
by: Raynaud, Patrick A. C.
Published: (2012)

Cracks in shroud support access hole cover welds.
Published: (1988)

Intersystem LOCA outside containment.
Published: (1992)

Asymmetric blowdown loads on PWR primary systems : resolution of generic task action plan A-2 /
by: Hosford, S. B. (Steve B.)
Published: (1981)

Influence of the wetting state of a heated surface on heat transfer and pressure loss in an evaporator tube /
by: Kohler, W., et al.
Published: (1986)

Uncontrolled leakage of reactor coolant outside containment.
Published: (1985)