Cover Image

Inaccuracy of diagnostic equipment for motor-operated butterfly valves.

Bibliographic Details
Corporate Author:	U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, [1996]
Series:	NRC information notice ; 96-30.
Subjects:	Butterfly valves > Testing. Nuclear facilities > United States > Equipment and supplies.
Online Access:	https://purl.fdlp.gov/GPO/gpo1782

Similar Items

Vibration-induced degradation of butterfly valves.
Published: (2005)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Problem with Henry Pratt motor-operated butterfly valves.
Published: (1994)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Potential inadequacies in the prediction of torque requirement of and torque output for motor-operated butterfly valves.
Published: (1994)

Potential overstress of shafts on Fisher series 9200 butterfly valves with expandable T rings.
Published: (1981)

Failure of elastomer seated butterfly valves used only during cold shutdowns.
Published: (1984)

Preliminary results of validation testing of motor-operated valve diagnostic equipment.
Published: (1991)

Accuracy of motor-operated valve diagnostic equipment manufactured by Liberty Technologies.
Published: (1993)

Butterfly valves : torque, head loss, and cavitation analysis.
Published: (2001)

Recent NRC-sponsored testing of motor-operated valves.
Published: (1989)

Results of NRC-sponsored testing of motor-operated valves.
Published: (1990)

Accuracy of motor-operated valve diagnostic equipment (responses to supplement 5 to Generic Letter 89-10).
Published: (1994)

Motor-operated valve actuator thrust variations measured with a torque thrust cell and a strain gage.
Published: (1993)

Results of validation testing of motor-operated valve diagnosis equipment.
Published: (1992)

Inaccuracy of safety valve set pressure determinations using assist devices.
Published: (1994)

Crosby relief valve setpoint drift problems caused by corrosion of the guide ring.
Published: (1998)

Inadequacies in the design of DC motor-operated valves.
Published: (1988)

Inoperability of power-operated relief valves masked by downstream indications during testing.
Published: (1996)

Safety-related (1) motor-operated valve testing and surveillance results of the public workshops.
Published: (1989)

Potential design deficiency in motor-operated valve control circuitry.
Published: (2013)

Butterfly valves : torque, head loss, and cavitation analysis /
by: Bosserman, Bayard E., II
Published: (2012)

Motor-operated valve performance issues.
Published: (1996)

Vibration-induced valve failures.
Published: (1983)

Malfunction of a pressurized code safety valve.
Published: (1993)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Failure of Limitorque motor-operated valves resulting from incorrect installation of pinion gear.
Published: (1985)

Inservice testing of pumps and valves, and inservice examination and testing of dynamic restraints (snubbers) at nuclear power plants : draft report for comment /
by: Tingen, S. G.
Published: (2010)

Periodic verification of design-basis capability of safety-related motor-operated valves.
Published: (1996)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Effects of changing valve motor-operator switch settings.
Published: (1986)

Setpoint testing of pressurizer safety valves with filled loop seals using hydraulic assist devices.
Published: (1988)

Motor brakes on valve actuator motors.
Published: (1993)

Susceptibility of containment sump recirculation gate valves to pressure locking.
Published: (1995)

Failure of DC motor-operated valves to develop rated torque because of improper cable sizing.
Published: (1989)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)

Motor-operated valve inoperable due to stem-disc separation.
Published: (2012)

Failure of motor-operated valve electric power train due to sheared or dislodged motor pinion gear key.
Published: (1994)

Control valve capacity test procedure.
Published: (1988)

Check valve inservice testing program deficiencies.
Published: (1988)