Cover Image

Failure of condensate piping because of erosion-corrosion at a flow-straightening device.

Bibliographic Details
Corporate Author:	U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, [1995]
Series:	NRC information notice ; 95-11.
Subjects:	Nuclear power plants > Piping. Nuclear power plants > Piping > Equipment and supplies > Corrosion.
Online Access:	https://purl.fdlp.gov/GPO/gpo4124

Similar Items

Erosion-corrosion of PWR feedwater piping survey of experience, design, water chemistry, and materials /
by: Jonas, Otakar
Published: (1988)

Valve stem corrosion failures.
Published: (1985)

Rupture in extraction steam piping as a result of flow-accelerated corrosion.
Published: (1997)

High-energy piping failures caused by wall thinning.
Published: (1991)

Microbiologically influenced corrosion of emergency diesel generator service water piping.
Published: (1994)

Intergranular stress corrosion cracking leading to steam generator tube failure.
Published: (1984)

Valve body erosion.
Published: (1989)

Stress corrosion cracking in PWR steam generator tubes.
Published: (1990)

Potential for stress corrosion cracking in steam generator tube plugs supplied by Babcock and Wilcox.
Published: (1989)

Heat tracing contributes to corrosion failure of stainless steel piping.
Published: (1985)

Microbiologically induced corrosion of containment service water system.
Published: (1985)

Corrosion of William Powell gate valve disc holders.
Published: (1994)

Water chemistry and corrosion of nuclear power plant structural materials /
by: Kritsky, V. G.
Published: (1999)

Safety injection pipe failure.
Published: (1988)

Piping restraint effects on piping integrity : presented at Third U.S. [as printed] National Congress on Pressure Vessels and Piping, American Society of Mechanical Engineers, San Francisco, California, June 25-29, 1979 /
Published: (1979)

IGSCC in BWR plants.
Published: (1984)

Vibration-induced valve failures.
Published: (1983)

Pipe whip restraints.
Published: (1985)

Failure of DC motor-operated valves to develop rated torque because of improper cable sizing.
Published: (1989)

Use of inappropriate guidelines and criteria for nuclear piping and pipe support evaluation and design.
Published: (1995)

Fatigue crack flaw tolerance in nuclear power plant piping : a basis for improvements to ASME code section XI Appendix L /
Published: (2007)

Corrosion of valve-to-torque tube keys in spray pond cross connect valves.
Published: (1990)

Alleged falsification of certifications and alteration of markings on piping, valves, and fittings.
Published: (1985)

Corrosion in fire protection piping due to air and water interaction.
Published: (2013)

Stress corrosion cracking in nonsensitized 316 stainless steel.
Published: (1984)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Higher than predicted erosion/corrosion in unisolable reactor coolant pressure boundary coolant inside containment at a boiling water reactor.
Published: (1992)

Pipe support anchors installed improperly.
Published: (2010)

Accelerated dealloying of cast aluminum-bronze valves caused by microbiologically induced corrosion.
Published: (1994)

Relaxation in arbitrary intermediate pipe rupture requirements.
Published: (1987)

Main steam isolation valve failure to close on demand because of inadequate maintenance and testing.
Published: (1994)

Unexpected restriction to thermal growth of reactor coolant piping.
Published: (1992)

Piping thermal deflection induced by stratified flow.
Published: (1984)

Potential failures of auxiliary steam piping and the possible effects on the operability of vital equipment.
Published: (1990)

Failure of check and stop check valves subjected to low flow conditions.
Published: (1986)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Axial (longitudinal) oriented cracking in piping.
Published: (1980)

Potential blockage by debris of safety system piping which is not used during normal operation or tested during surveillances.
Published: (1996)

Pipe wear due to interaction of flow-induced vibration and reflective metal insulation.
Published: (2008)

Failure of air check valves to seat.
Published: (1985)