Cover Image

Potential blockage of safety-related strainers by material brought inside containment.

Bibliographic Details
Corporate Author:	U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, [1995]
Series:	NRC information notice ; 95-06.
Subjects:	Nuclear reactors > Containment > Safety measures. Nuclear reactors > Containment > Equipment and supplies.
Online Access:	https://purl.fdlp.gov/GPO/gpo4119

Similar Items

New information regarding insulation material performance and debris blockage of PWR containment sumps.
Published: (1990)

Environmental qualification deficiency for cables and containment penetration pigtails.
Published: (1997)

Failure of containment spray header valve to open due to excessive pressure from inertial effects of water.
Published: (1994)

GSI-191 PWR sump screen blockage chemical effects tests : thermodynamic simulations /
Published: (2006)

Containment liner corrosion.
Published: (2010)

Potential containment leak paths through hydrogen analyzers.
Published: (1996)

Deficiency in Comsip, Inc. standard bed catalyst.
Published: (1984)

The Role of nuclear reactor containment in severe accidents : report /
Published: (1989)

Inoperable containment atmosphere sensing systems.
Published: (1983)

Degradation of leak-chase channel systems for floor welds of metal containment shell and concrete containment metallic liner.
Published: (2014)

Debris in containment and the residual heat removal system.
Published: (1994)

Improper closure of primary containment access hatches.
Published: (1979)

Mark I containment long-term program.
Published: (1980)

Potential for Teflon® material degradation in containment penetrations, mechanical seals and other components.
Published: (2014)

Isolation of reactor coolant system from low-pressure systems outside containment.
Published: (1984)

Confirmatory requirements relating to condensation oscillation loads for the Mark I containment long term program.
Published: (1979)

Acceptance criteria for the Mark I containment long term program.
Published: (1979)

Schedule for implementation and resolution of Mark I containment long term program.
Published: (1979)

Potential degradation of secondary containment.
Published: (1990)

Corrosion of steel containment and containment liner.
Published: (2004)

Effect of incorrect strainer pressure drop on available net positive suction head.
Published: (1997)

Steel containment degradation and associated license renewal aging management issues.
Published: (2011)

Standby gas treatment system problems.
Published: (1984)

Deficiencies In outside containment flooding protection.
Published: (1987)

Computer codes for small-break loss-of-coolant accidents : a Nordic assessment : final report of the NKA project SAK-3 /
by: Rathmann, Ole
Published: (1985)

Advances in containment design and analysis : presented at ASME/ANS joint conference, Portland, Oregon, July 26-28, 1982 /
Published: (1982)

Potential common-mode post-accident failure of containment coolers.
Published: (1996)

Potential loss of effective volume for containment recirculation spray at PWR facilities.
Published: (1990)

Modifications to containment blowout panels without appropriate design controls.
Published: (1996)

Installation of a hardened wetwell vent.
Published: (1989)

Design of the reactor containment systems in nuclear power plants : a safety guide.
Published: (1985)

Inadequate service water protection against core melt frequency.
Published: (1986)

Deficiencies in primary containment electrical penetration assemblies.
Published: (1982)

Containment integrated leak rate tests.
Published: (1985)

Deficiencies in primary containment low-voltage electrical penetration assemblies.
Published: (1988)

Shield building concrete subsurface laminar cracking caused by moisture intrusion and freezing.
Published: (2013)

Inadvertent isolation of containment spray systems.
Published: (1984)

Risk-informed assessment of degraded containment vessels /
Published: (2006)

Vapor explosions in a one-dimensional large-scale geometry with simulant melts /
by: Park, Hyeon-Sook, et al.
Published: (1999)

Containment concrete surface condition examination frequency and acceptance criteria.
Published: (2010)