Boussinesq-equation and rans hybrid wave model /
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Thesis eBook |
| Language: | English |
| Published: |
[College Station, Tex.] :
[Texas A&M University],
[2010]
|
| Subjects: | |
| Online Access: | Link to OAK Trust copy |
| Abstract: | This dissertation presents the development of a novel hybrid wave model, comprised of the irrotational, 1-D horizontal Boussinesq and 2-D vertical turbulence-closed Reynolds Averaged Navier-Stokes (RANS) wave models. The two constituents are two-way coupled with the interface placed at a location where turbulence is relatively small. Boundary conditions on the interfacing side of each model is provided by its counterpart model through data exchange, requiring certain transformation due to the difference in physical variables employed in both models. The model is intended for large-scale wave simulation, accurate in both the nonbreaking and breaking zones with relatively coarser grid in the former and finer in latter, and yet efficient. Hybrid model tests against idealized solitary and standing wave motions and wave-overtopping on structure exhibit satisfactory to very good agreement. Compared with pure RANS simulations, the hybrid model saves computational time by a factor proportional to the reduction in the size of the RANS domain. Also, a large-scale tsunami simulation is provided for a numerical setup that is practically unapproachable using RANS alone; not only does the hybrid model offer more rapid simulation of relatively small-scale problems, it provides an opportunity to examine very large total domains with the fine resolution typical of RANS simulations. To allow for implementation on even larger domain with affordable CPU time, the hybrid model is parallelized to run on distributed memory machine. This is done by parallelizing the RANS model while leaving the Boussinesq model serial. One of the processors is responsible for both the sub-RANS and Boussinesq calculations. ICCG(0) for solving the pressure equation is parallelized using the nonoverlapping-decomposition technique, requiring more iterations than the serial one. Standing wave and hypothetical tsunami simulations with 960x66 and 1000x100 grids, and using 8 processors confirm model validity and computational efficiency of 82% and 65%. Finally, the 2-D Boussinesq model is parallelized using domain decomposition technique. The solution to the tridiagonal system arising in the model is calculated as the sum of the homogeneous and particular solutions. Parallel model tests using up to 32 processors exhibit model accuracy and efficiency of 80% for simulation with 500x500--2000x2000 grids. |
|---|---|
| Item Description: | "Major Subject: Ocean Engineering" Title from author supplied metadata (automated record created 2010-03-12 12:08:51). Electronic resource. |
| Physical Description: | 1 online resource. |
| Bibliography: | Includes bibliographical references. |