Cover Image

Method for determination of <5 ppm oxygen in sodium samples /

Bibliographic Details
Main Author:	R. S. Reid
Corporate Author:	George C. Marshall Space Flight Center
Other Authors:	Martin, J. J., Schmidt, G. L.
Format:	Government Document eBook
Language:	English
Published:	[Huntsville], Ala. : National Aeronautics and Space Administration, Marshall Space Flight Center, [2005]
Series:	NASA technical memorandum ; 2005-213902.
Subjects:	Alkali metals. Sodium. Purity. Heat pipes. Liquid metals. Corrosion. Chemical analysis.
Online Access:	https://purl.fdlp.gov/GPO/LPS122666

Similar Items

Refractory metal heat pipe life test : test plan and standard operating procedures /
by: Martin, J. J.
Published: (2010)

Design of refractory metal heat pipe life test environment chamber, cooling system, and radio frequency heating system /
Published: (2011)

Post-test analysis of a 10-year sodium heat pipe life test /
Published: (2011)

A compendium of brazed microstructures for fission power systems applications /
by: Locci, Ivan E.
Published: (2012)

Alkali metal backup cooling for Stirling systems, experimental results /
by: Schwendeman, Carl
Published: (2013)

Metallized gelled propellants : oxygen/RP-1/aluminum rocket heat transfer and combustion measurements /
by: Palaszewski, Bryan Alan Richard, et al.
Published: (1996)

Design of refractory metal life test heat pipe and calorimeter /
by: Martin, J. J.
Published: (2010)

Chemical and microstructural changes in metallic and ceramic materials exposed to Venusian surface conditions /
by: Costa, Gustavo C. C.
Published: (2017)

Material studies related to the use of NaK heat exchangers coupled to stirling heater heads /
Published: (2011)

Fission surface power technology demonstration unit test results /
by: Briggs, Maxwell H.
Published: (2016)

NASA Lewis steady-state heat pipe code architecture : final report /
by: Mi, Ye, et al.
Published: (2013)

Corrosion fatigue crack propagation in metals /
by: Gangloff, R. P.
Published: (1990)

Heat pipes and heat rejection component testing at NASA Glenn Research Center /
by: Sanzi, James L.
Published: (2012)

Progress towards the development of a long-lived Venus lander duplex system /
by: Dyson, Rodger W.
Published: (2011)

Metallized gelled propellants : oxygen/RP-1/aluminum rocket engine calorimeter heat transfer measurements and analysis /
by: Palaszewski, Bryan Alan Richard
Published: (1997)

ECLSS universal waste management system (UWMS) metal materials compatibility study : electrochemical and crevice corrosion evaluation /
by: Lee, R. E.
Published: (2017)

Neutralizer and sample chamber for the Atomic Oxygen Simulation System (AOSS) /
by: Albridge, Royal G.
Published: (1992)

Investigation of liquid metal heat exchanger designs for fission surface power /
Published: (2009)

Alternate high capacity heat pipe final report /
by: Voss, F. E.
Published: (1986)

Emission FTIR analyses of thin microscopic patches of jet fuel residues deposited on heated metal surfaces : final report /
by: Lauer, James L., et al.
Published: (1986)

The relative fluorescent efficiency of sodium salicylate between 90 and 800 eV /
by: Angel, G. C.
Published: (1986)

Experimental studies of NaK in a simulated space environment /
by: Gibson, Marc, et al.
Published: (2011)

High-purity aluminum magnet technology for advanced space transportation systems /
Published: (2002)

Liberty Bell 7 recovery evaluation and nondestructive testing /
by: Madaras, Eric I. (Eric Irvine), et al.
Published: (1999)

Documentation of stainless steel lithium circuit test section design /
Published: (2010)

Mechanical testing of large thallium doped sodium iodide single crystals /
by: Lee, Henry M.
Published: (1986)

Mechanical testing of large thallium doped sodium iodide single crystals /
by: Lee, Henry M.
Published: (1986)

High capacity heat pipe performance demonstration : final report.
Published: (1983)

Comparison of [gamma-gamma] prime phase coarsening responses of three powder metal disk superalloys.
by: Gabb, Timothy Paul, 1958-
Published: (2016)

Ten year operating test results and post-test analysis of a 1/10 segment stirling sodium heat pipe : phase III final report /
by: Rosenfeld, John H., et al.
Published: (2012)

Testing of an annular linear induction pump for the fission surface power technology demonstration unit /
by: Polzin, K. A.
Published: (2013)

Transient characteristics of a grooved water heat pipe with variable heat load /
by: Jang, Jong Hoon
Published: (1990)

The growth of small corrosion fatigue cracks in alloy 7075 /
by: Piascik, Robert S.
Published: (2015)

Two-step multi-physics analysis of an annular linear induction pump for fission power systems /
by: Geng, Steven M., et al.
Published: (2016)

An improved algorithm for the modeling of vapor flow in heat pipes /
by: Tower, Leonard K.
Published: (1989)

SAMS acceleration measurements on Mir from January to May 1997 (NASA increment 4) /
by: DeLombard, Richard
Published: (1998)

Thermosyphon flooding in reduced gravity environments test results /
by: Gibson, Marc A. (Marc Andrew)
Published: (2013)

Development of a contact heat exchanger for a constructable radiator system.
Published: (1983)

Heat pipe powered Stirling conversion for the demonstration using flattop fission (DUFF) test /
by: Gibson, Marc A. (Marc Andrew), et al.
Published: (2013)

Superalloy foams for aeroshell applications /
by: Gayuda, John
Published: (2001)