Development and testing of tip devices for horizontal axis wind turbines /
| Main Author: | Gyatt, G. W. |
|---|---|
| Corporate Authors: | Lewis Research Center, United States. Department of Energy. Wind Energy Technology Division, AeroVironment Inc |
| Other Authors: | Lissaman, Peter B. S. |
| Format: | Government Document eBook |
| Language: | English |
| Published: |
Monrovia, CA :
AeroVironment, Inc.,
1985.
|
| Series: | NASA contractor report ;
NASA CR-174991. |
| Subjects: | |
| Online Access: | https://purl.fdlp.gov/GPO/LPS117576 |
Similar Items
Aerodynamic measurements of a variable-speed power-turbine blade section in a transonic turbine cascade /
by: Flegel, Ashlie B.
Published: (2014)
by: Flegel, Ashlie B.
Published: (2014)
Blade heat transfer measurements and predictions in a transonic turbine cascade /
by: Giel, P. W. (Paul W.)
Published: (1999)
by: Giel, P. W. (Paul W.)
Published: (1999)
Wind tunnel tests of rotor blade sections with replications of ice formations accreted in hover /
by: Lee, John D.
Published: (1986)
by: Lee, John D.
Published: (1986)
Computational investigation of novel tip leakage mitigation methods for high pressure turbine blades /
by: Ibrahim, Mounir B., et al.
Published: (2014)
by: Ibrahim, Mounir B., et al.
Published: (2014)
Design and integration of a rotor alone nacelle for acoustic fan testing /
Published: (2001)
Published: (2001)
Design and integration of a rotor alone nacelle for acoustic fan testing /
by: Shook, Tony D.
Published: (2001)
by: Shook, Tony D.
Published: (2001)
Hover validation and acoustic baseline blade set definition /
by: Overmeyer, Austin D., et al.
Published: (2020)
by: Overmeyer, Austin D., et al.
Published: (2020)
Integrated technology rotor/flight research rotor hub concept definition /
by: Dixon, Peter G. C.
Published: (1985)
by: Dixon, Peter G. C.
Published: (1985)
Comparison of various supersonic turbine tip designs to minimize aerodynamic loss and tip heating /
by: Shyam, Vikram
Published: (2012)
by: Shyam, Vikram
Published: (2012)
Initial investigation of the acoustics of a counter-rotating open rotor model with historical baseline blades in a low-speed wind tunnel /
by: Elliott, David M.
Published: (2012)
by: Elliott, David M.
Published: (2012)
Integrated turbine tip clearance and gas turbine engine simulation /
by: Chapman, Jeffryes W.
Published: (2016)
by: Chapman, Jeffryes W.
Published: (2016)
Review and analysis of the DNW/model 360 rotor acoustic data base /
by: Zinner, R. A.
Published: (1989)
by: Zinner, R. A.
Published: (1989)
A study of fan stage/casing interaction models /
by: Lawrence, Charles, 1957-
Published: (2003)
by: Lawrence, Charles, 1957-
Published: (2003)
BladeCAD : an interactive geometric design tool for turbomachinery blades /
by: Miller, Perry L.
Published: (1996)
by: Miller, Perry L.
Published: (1996)
Helicopter model rotor-blade vortex interaction impulsive noise : scalability and parametric variations /
Published: (1984)
Published: (1984)
Experimental assessment of helicopter rotor turbulence ingestion noise in hover /
by: Simonich, John C. (John Charles)
Published: (1989)
by: Simonich, John C. (John Charles)
Published: (1989)
Experimental assessment of helicopter rotor turbulence ingestion noise in hover /
by: Simonich, John C. (John Charles)
Published: (1989)
by: Simonich, John C. (John Charles)
Published: (1989)
Dynamic blade loading in the ERDA/NASA 100 kW and 200 kW wind turbines /
by: Spera, David A., et al.
Published: (1977)
by: Spera, David A., et al.
Published: (1977)
Determination of HART I blade structural properties by laboratory testing /
by: Jung, Sung N., et al.
Published: (2012)
by: Jung, Sung N., et al.
Published: (2012)
Probabilistic analysis of bladed turbine disks and the effect of mistuning /
by: Shah, A. R.
Published: (1990)
by: Shah, A. R.
Published: (1990)
Experimental study of main rotor tip geometry and tail rotor interactions in hover /
by: Balch, D. T.
Published: (1985)
by: Balch, D. T.
Published: (1985)
Airframe structural dynamic considerations in rotor design optimization /
by: Kvaternik, Raymond G.
Published: (1989)
by: Kvaternik, Raymond G.
Published: (1989)
Study of controlled diffusion stator blading : II. final report /
by: Behlke, R. F., et al.
Published: (1983)
by: Behlke, R. F., et al.
Published: (1983)
A reduced model for prediction of thermal and rotational effects on turbine tip clearance /
by: Kypuros, Javier A.
Published: (2003)
by: Kypuros, Javier A.
Published: (2003)
NASA Rotor 37 CFD code validation : Glenn-HT code /
by: Ameri, Ali A.
Published: (2010)
by: Ameri, Ali A.
Published: (2010)
A combined integrating and differentiating matrix formulation for boundary value problems on rectangular domains /
by: Lakin, W. D.
Published: (1986)
by: Lakin, W. D.
Published: (1986)
The aerodynamic performance of an over-the-rotor liner with circumferential grooves on a high bypass ratio turbofan rotor /
by: Bozak, Richard F., et al.
Published: (2013)
by: Bozak, Richard F., et al.
Published: (2013)
Computational aerodynamic simulations of a 1484 ft/sec tip speed quiet high-speed fan system model for acoustic methods assessment and development /
by: Tweedt, Daniel L. (Daniel Lawrence)
Published: (2014)
by: Tweedt, Daniel L. (Daniel Lawrence)
Published: (2014)
SSME seal test program : test results for sawtooth-pattern damper seal : interim progress report /
by: Childs, Dara W.
Published: (1986)
by: Childs, Dara W.
Published: (1986)
Heat transfer and flow on the first stage blade tip of a power generation gas turbine.
by: Ameri, Ali A.
Published: (1999)
by: Ameri, Ali A.
Published: (1999)
Off-design performance loss model for radial turbines with pivoting, variable-area stators /
by: Meitner, Peter L., et al.
Published: (1980)
by: Meitner, Peter L., et al.
Published: (1980)
Flow control under low-pressure turbine conditions using pulsed jets : final report /
by: Volino, Ralph John, et al.
Published: (2012)
by: Volino, Ralph John, et al.
Published: (2012)
Enhanced fan noise modeling for turbofan engines /
by: Krejsa, E. A., et al.
Published: (2014)
by: Krejsa, E. A., et al.
Published: (2014)
Assessment of aerodynamic challenges of a variable-speed power turbine for large civil tilt-rotor application /
by: Welch, Gerard E.
Published: (2010)
by: Welch, Gerard E.
Published: (2010)
An assessment of 3-C PIV analysis methodology for HART II measured data /
by: Lim, Joon W.
Published: (2010)
by: Lim, Joon W.
Published: (2010)
Toward understanding tip leakage flows in small compressor cores including stator leakage flow /
by: Berdanier, Reid A., et al.
Published: (2017)
by: Berdanier, Reid A., et al.
Published: (2017)
Experimental and numerical investigation of losses in low-pressure turbine blade rows /
by: Dorney, Daniel J.
Published: (2000)
by: Dorney, Daniel J.
Published: (2000)
Applying pressure sensitive paint technology to rotor blades /
by: Watkins, A. Neal
Published: (2014)
by: Watkins, A. Neal
Published: (2014)
Three-dimensional flow field measurements in a transonic turbine cascade /
by: Giel, P. W.
Published: (1996)
by: Giel, P. W.
Published: (1996)
Experimental studies of low-pressure turbine flows and flow control : final report /
by: Volino, Ralph John
Published: (2012)
by: Volino, Ralph John
Published: (2012)