Structural analysis of a thermal insulation retainer assembly /

Micromechanics analysis of space simulated thermal deformations and stresses in continuous fiber reinforced composites /
by: Bowles, David E.
Published: (1990)

Performance and vibratory loads data from a wind-tunnel test of a model helicopter main-rotor blade with a paddle-type tip /
by: Yeager, William T.
Published: (1997)

Finite element thermo-viscoplastic analysis of aerospace structures /
by: Pandey, Ajay K.
Published: (1990)

Aeroservoelastic testing of free flying wind tunnel models /
by: Scott, Robert C.
Published: (2013)

Progressive fracture of fiber composite build-up structures /
by: Gotsis, Pascal K., et al.
Published: (1996)

Experimental studies of transonic flow field near a longitudinally slotted wind tunnel wall /
by: Everhart, Joel L.
Published: (1994)

Influence of cooling hole geometry and material conductivity on the thermal response of cooled silicon nitride plate /
by: Abdul-Aziz, Ali, et al.
Published: (2002)

A two-dimensional adaptive-wall test section with ventilated walls in the Ames 2- by 2-foot transonic wind tunnel /
by: Schairer, Edward T.
Published: (1989)

Application of composite mechanics to composites enhanced concrete structures /
by: Chamis, C. C. (Christos C.)
Published: (2006)

Probabilistic assessment of National Wind Tunnel /
by: Shah, A. R., et al.
Published: (1996)

Method for estimating operational loads on aerospace structures using span-wisely distributed surface strains /
by: Ko, William L., et al.
Published: (2013)

Structural and thermal response of 30 cm diameter ion thruster optics /
by: MacRae, G. S.
Published: (1989)

Structural and thermal response of 30 cm diameter ion thruster optics /
by: MacRae, G. S.
Published: (1989)

Cryogenic pressure calibrator for wide temperature electronically scanned (ESP) pressure modules /
by: Faulcon, Nettie D.
Published: (2001)

Mechanical- and thermal-buckling behavior of rectangular plates with different central cutouts /
by: Ko, William L.
Published: (1998)

Effect of flange bolt preload on space shuttle main engine high pressure oxidizer turbopump housing analysis /
by: Min, J. B.
Published: (1991)

Correlation of structural analysis and test results for the McDonnell Douglas stitched/RFI all-composite wing stub box /
by: Wang, John T.
Published: (1996)

Design study of advanced model support systems for the National Transonic Facility.
Published: (1987)

Modifications to Langley 0.3-m TCT adaptive wall software for heavy gas test medium.
by: Murthy, A. V.
Published: (1992)

Two-dimensional wind tunnel.
Published: (1982)

Control of the NASA Langley 16-foot transonic tunnel with the self-organizing feature map /
by: Motter, Mark A.
Published: (1998)

A discourse on sensitivity analysis for discretely-modeled structures /
by: Adelman, Howard M.
Published: (1991)

Final report on investigation of transonic flow over segmented slotted wind tunnel wall with mass transfer /
by: Bhat, M. K.
Published: (1990)

MAVRIC flutter model transonic limit cycle oscillation test /
Published: (2001)

MAVRIC flutter model transonic limit cycle oscillation test /
by: Edwards, John W.
Published: (2001)

Thermal and mechanical buckling analysis of hypersonic aircraft hat-stiffened panels with varying face sheet geometry and fiber orientation /
by: Ko, William L.
Published: (1996)

Modeling and control study of the NASA 0.3-meter transonic cryogenic tunnel for use with sulfur hexafluoride medium /
by: Balakrishna, S.
Published: (1992)

Finite element analysis and test results comparison for the hybrid wing body center section test article /
by: Przekop, Adam
Published: (2016)

The NASA Langley 16-foot transonic tunnel : historical overview, facility description, calibration, flow characteristics, and test capabilities /
Published: (1995)

On hybrid and mixed finite element methods /
by: Pian, Theodore H. H., 1919-2009
Published: (1981)

Development of curved-plate elements for the exact buckling analysis of composite plate assemblies including transverse-shear effects /
by: McGowan, David M.
Published: (1999)

Analytic and computational perspectives of multi-scale theory for homogeneous, laminated composite, and sandwich beams and plates /
Published: (2012)

Residual stresses in thermal barrier coatings for a Cu-8Cr-4Nb substrate system /
by: Ghosn, Louis J., et al.
Published: (2002)

Residual stresses in thermal barrier coatings for a Cu-8Cr-4Nb substrate system /
by: Ghosn, Louis J.
Published: (2002)

Aerodynamic characteristics of two NASA supercritical airfoils with different maximum thicknesses /
by: Harris, Charles D., 1952-
Published: (1972)

An evaluation of three experimental processes for two-dimensional transonic tests /
by: Zuppardi, Gennaro
Published: (1989)