Arcjet cathode phenomena /

Composite erosion by computational simulation /
by: Chamis, C. C. (Christos C.)
Published: (2006)

Heater validation for the NEXT-C hollow cathodes /
by: Verhey, Timothy R., et al.
Published: (2018)

Advanced electric propulsion and space plasma contactor research : annual report /
by: Wilbur, Paul J.
Published: (1987)

Advanced electric propulsion and space plasma contactor research : annual report /
by: Wilbur, Paul J.
Published: (1987)

RHETT/EPDM flight hollow cathode /
by: Manzella, David H., et al.
Published: (1997)

Final report on the SRB frustrum "Smiley" cracking phenomenon study /
by: Cruse, Thomas A.
Published: (1993)

Mach 0.3 Burner Rig Facility at the NASA Glenn Materials Research Laboratory /
Published: (2011)

Surface cracking and interface reaction associated delamination failure of thermal and environmental barrier coatings /
Published: (2003)

Hollow cathode operation at high discharge currents /
by: Friedly, Verlin Joe
Published: (1990)

Electric arc and electrochemical surface texturing technologies /
by: Banks, Bruce A., et al.
Published: (1997)

Life model of hollow cathodes using a barium calcium aluminate impregnated tungsten emitter : [final report] /
by: Kovaleski, Scott D.
Published: (2001)

Mechanical properties of degraded PMR-15 resin /
by: Tsuji, Luis C. (Luis Christophe), 1974-, et al.
Published: (1998)

The surface crack problem in an orthotropic plate under bending and tension /
by: Wu, Bing-Hua
Published: (1986)

The surface crack problem in an orthotropic plate under bending and tension /
by: Wu, Bing-Hua
Published: (1986)

Seeding cracks using a fatigue tester for accelerated gear tooth breaking /
Published: (2011)

A particle and energy balance model of the orificed hollow cathode.
by: Domonkos, Matthew T.
Published: (2002)

A particle and energy balance model of the orificed hollow cathode /
by: Domonkos, Matthew T.
Published: (2002)

Qualification of the flight heaters for the NEXT-C hollow cathodes /
by: Arthur, Neil
Published: (2020)

Characterization of a high current, long life hollow cathode /
by: Van Noord, Jonathan L.
Published: (2006)

Influence of shear stiffness degradation on crack paths in uni-directional composite laminates /
by: Satyanarayana, Arunkumar, et al.
Published: (2017)

Plasma emission characteristics from a high current hollow cathode in an ion thruster discharge chamber /
by: Foster, John E., et al.
Published: (2002)

Development program on a cold cathode electron gun : annual report /
by: Spindt, C. A.
Published: (1985)

High current hollow cathode plasma plume measurements /
by: Thomas, Robert E., et al.
Published: (2014)

Electric propulsion applications and impacts /
by: Curran, Francis M., et al.
Published: (1996)

International Space Station cathode life testing status /
by: Sarver-Verhey, Timothy R., et al.
Published: (1998)

Sol-gel synthesis of La0.6SR0.4CoO3-x and Sm0.5Sr0.5CoO3-x cathode nanopowders for solid oxide fuel cells /
by: Bansal, Narottam P.
Published: (2011)

3DHZETRN : inhomogeneous geometry issues /
by: Wilson, John W. (John William), 1940-, et al.
Published: (2017)

Space station cathode ignition test status at 32,000 cycles /
Published: (1997)

Space station cathode ignition test status at 32,000 cycles /
by: Zakany, James S., et al.
Published: (1997)

Plasma emission characteristics from a high current hollow cathode in an ion thruster discharge chamber /
by: Foster, John E.
Published: (2002)

Analytical round robin for elastic-plastic analysis of surface cracked plates : phase I results /
by: Wells, D. N.
Published: (2012)

Analytical round robin for elastic-plastic analysis of surface cracked plates : phase II results /
by: Allen, P. A., et al.
Published: (2017)

Investigation of methods to produce a uniform cloud of fuel particles in a flame tube /
Published: (1990)

The full-scale process and design changes for elimination of insulation edge separations and voids in tang flap area : final report.
Published: (1991)

Comparison of on-orbit and ground based hollow cathode operation /
Published: (2003)

Morphology of zirconia particles exposed to D.C. arc plasma jet /
by: Zaplatynsky, Isidor
Published: (1987)