The Battelle Integrity of Nuclear Piping (BINP) Program final report /

Mechanical integrity of in-situ leach injection wells and piping.
Published: (1997)

Alleged falsification of certifications and alteration of markings on piping, valves, and fittings.
Published: (1985)

Pipe support anchors installed improperly.
Published: (2010)

Piping restraint effects on piping integrity : presented at Third U.S. [as printed] National Congress on Pressure Vessels and Piping, American Society of Mechanical Engineers, San Francisco, California, June 25-29, 1979 /
Published: (1979)

Failure of condensate piping because of erosion-corrosion at a flow-straightening device.
Published: (1995)

Relaxation in arbitrary intermediate pipe rupture requirements.
Published: (1987)

Assessment of NDE methods on inspection of HDPE butt fusion piping joints for lack of fusion /
Published: (2012)

Safety injection pipe failure.
Published: (1988)

Unexpected restriction to thermal growth of reactor coolant piping.
Published: (1992)

Seismic analysis of large-scale piping systems for the JNES-NUPEC ultimate strength piping test program /
by: DeGrassi, G.
Published: (2008)

Possible flaws in certain piping systems fabricated by Associated Piping and Engineering.
Published: (1991)

Risk-informed assessment of degraded buried piping systems in nuclear power plants /
Published: (2005)

Calculation methodologies for operability determination of gas voids in nuclear power plant piping.
Published: (2011)

Axial (longitudinal) oriented cracking in piping.
Published: (1980)

Erosion-corrosion of PWR feedwater piping survey of experience, design, water chemistry, and materials /
by: Jonas, Otakar
Published: (1988)

Final report on advanced nondestructive evaluation for steam generator tubing for the Second International Steam Generator Tube Integrity Program /
Published: (2003)

Second U.S. Nuclear Regulatory Commission international steam generator tube integrity research program : final project summary report /
Published: (2003)

High-energy piping failures caused by wall thinning.
Published: (1991)

Analysis of JNES seismic tests on degraded piping /
Published: (2010)

Chloride contamination of safety related piping and components.
Published: (1980)

Nuclear service water piping : Oskarshamn Nuclear Power Plant, Figeholm, Sweden.
Published: (1995)

Defective RHR replacement piping.
Published: (1984)

Use of specialized "stiff" pipe clamps.
Published: (1983)

Results of blind testing for the program to assess the reliability of emerging nondestructive techniques /
by: Meyer, R. M., et al.
Published: (2017)

Potential blockage by debris of safety system piping which is not used during normal operation or tested during surveillances.
Published: (1996)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Rupture in extraction steam piping as a result of flow-accelerated corrosion.
Published: (1997)

Corrosion in fire protection piping due to air and water interaction.
Published: (2013)

Piping thermal deflection induced by stratified flow.
Published: (1984)

Unexpected piping movement attributed to thermal stratification.
Published: (1988)

Ten-year inservice inspection (ISI) program update for licensees that intend to implement risk-informed ISI of piping.
Published: (1998)

Overloading of structural elements due to pipe support loads.
Published: (1979)

Stress analysis of safety-related piping.
Published: (1979)

Assessment of eddy current testing for the detection of cracks in cast stainless steel reactor piping components /
Published: (2007)

Functional capability of piping systems /
by: Terao, D., et al.
Published: (1992)

Potential failures of auxiliary steam piping and the possible effects on the operability of vital equipment.
Published: (1990)