A dynamic analysis of rotary combustion engine seals /
| Corporate Author: | United States. National Aeronautics and Space Administration |
|---|---|
| Other Authors: | Knoll, J. |
| Format: | Government Document Microform Book |
| Language: | English |
| Published: |
[Washington, D.C.] :
[National Aeronautics and Space Administration],
[1984]
|
| Series: | NASA technical memorandum ;
83536. |
| Subjects: | |
| Online Access: | https://purl.fdlp.gov/GPO/LPS98747 |
Similar Items
Analysis of apex seal friction power loss in rotary engines /
by: Handschuh, Robert F.
Published: (2010)
by: Handschuh, Robert F.
Published: (2010)
Analysis of rotary engine combustion processes based on unsteady, three-dimensional computations /
by: Raju, M. S.
Published: (1990)
by: Raju, M. S.
Published: (1990)
Sliding seal materials for low heat rejection engines /
by: Beaty, Kevin
Published: (1989)
by: Beaty, Kevin
Published: (1989)
SSME seal test program : test results for hole-pattern damper seals, interim progress report /
by: Childs, Dara W.
Published: (1985)
by: Childs, Dara W.
Published: (1985)
Dynamic response of film thickness in spiral-groove face seals /
by: DiRusso, Eliseo
Published: (1985)
by: DiRusso, Eliseo
Published: (1985)
An experimental investigation of leak rate performance of a subscale candidate elastomer docking space seal /
by: Garafolo, Nicholas G.
Published: (2011)
by: Garafolo, Nicholas G.
Published: (2011)
Investigations of shuttle main landing gear door environmental seals /
Published: (2005)
Published: (2005)
Seal investigations of an active clearance control system concept /
Published: (2006)
Published: (2006)
2001 NASA Seal/Secondary Air System Workshop : proceedings of a conference held at and sponsored by NASA Glenn Research Center, Cleveland, Ohio, October 30-31, 2001.
Published: (2002)
Published: (2002)
Computational fluid mechanics utilizing the variational principle of modeling damping seals /
Published: (1984)
Published: (1984)
Interfaces--weak links, yet great opportunities /
Published: (2011)
Published: (2011)
Ribbon-burner simulation of the T-700 turbine shroud section for ceramic-lined seals research /
Published: (1985)
Published: (1985)
Effects of compression, staging, and braid angle on braided rope seal performance /
by: Steinetz, Bruce M., et al.
Published: (1997)
by: Steinetz, Bruce M., et al.
Published: (1997)
Block II solid rocket motor (SRM) conceptual design study : final report /
Published: (1986)
Published: (1986)
An experimental investigation of silicone-to-metal bond strength in composite space docking system seals /
by: Conrad, Mason C.
Published: (2010)
by: Conrad, Mason C.
Published: (2010)
SSME seal test program : test results for sawtooth-pattern damper seal : interim progress report /
by: Childs, Dara W.
Published: (1986)
by: Childs, Dara W.
Published: (1986)
Full-scale system for quantifying loads and leak rates of seals for space applications /
Published: (2010)
Published: (2010)
Modeling the internal combustion engine /
by: Zeleznik, Frank J.
Published: (1985)
by: Zeleznik, Frank J.
Published: (1985)
The Rotary combustion engine : a candidate for general aviation : a symposium held at Lewis Research Center, Cleveland, Ohio, February 28, 1978.
Published: (1978)
Published: (1978)
Numerical analysis of a rotating detonation engine in the relative reference frame /
by: Paxson, Daniel E.
Published: (2014)
by: Paxson, Daniel E.
Published: (2014)
Experimental assessment of advanced Stirling component concepts /
by: Ziph, B.
Published: (1985)
by: Ziph, B.
Published: (1985)
Advanced high temperature structural seals /
Published: (2002)
Published: (2002)
Advanced high temperature structural seals /
Published: (2002)
Published: (2002)
Rotary engine friction test rig development report /
by: Huffman, Brian C.
Published: (2011)
by: Huffman, Brian C.
Published: (2011)
Evaluation of an active clearance control system concept /
Published: (2005)
Published: (2005)
Deformation analysis of rotary combustion engine housings : final report on NASA grant NAG 3-456 /
by: Vilmann, Carl
Published: (1991)
by: Vilmann, Carl
Published: (1991)
A new analysis tool assessment for rotordynamic modeling of gas foil bearings /
by: Howard, Samuel A.
Published: (2010)
by: Howard, Samuel A.
Published: (2010)
Thermomechanical behavior of plasma-sprayed ZrO₂-Y₂O₃ coatings influenced by plasticity, creep and oxidation /
Published: (1987)
Published: (1987)
Fuel-rich catalytic combustion of a high density fuel /
by: Brabbs, Theodore A.
Published: (1993)
by: Brabbs, Theodore A.
Published: (1993)
Active combustion control for aircraft gas-turbine engines : experimental results for an advanced, low-emissions combustor prototype /
Published: (2012)
Published: (2012)
Active combustion control for aircraft gas turbine engines /
by: DeLaat, John C.
Published: (2000)
by: DeLaat, John C.
Published: (2000)
Active combustion control for aircraft gas turbine engines /
Published: (2000)
Published: (2000)
Solid rocket booster joint seal analyses /
by: Moore, Carleton J.
Published: (1987)
by: Moore, Carleton J.
Published: (1987)
Imaging of combustion species in a radially-staged gas turbine combustor /
by: Locke, Randy J.
Published: (1996)
by: Locke, Randy J.
Published: (1996)
Combustion /
by: Glassman, Irvin
Published: (1987)
by: Glassman, Irvin
Published: (1987)
Computational analysis of the combustion process in an axisymmetric,RBCC flowpath /
by: Steffen, Christopher J., et al.
Published: (2001)
by: Steffen, Christopher J., et al.
Published: (2001)
Computational analysis of the combustion process in an axisymmetric RBCC flowpath /
by: Steffen, Christopher J.
Published: (2001)
by: Steffen, Christopher J.
Published: (2001)
Prevention of over-pressurization during combustion in a sealed chamber /
by: Gokoglu, Suleyman A.
Published: (2012)
by: Gokoglu, Suleyman A.
Published: (2012)
High temperature braided rope seals for static sealing applications /
by: Steinetz, Bruce M.
Published: (1997)
by: Steinetz, Bruce M.
Published: (1997)
Potential commercial applications from combustion and fire research in space /
by: Friedman, Robert, et al.
Published: (1996)
by: Friedman, Robert, et al.
Published: (1996)