Cover Image

Deformation mechanisms of NiAl cyclicly deformed near the brittle-to-ductile transition temperature : final report /

Bibliographic Details
Main Author:	Antolovich, S. D. (Stephen D.)
Corporate Author:	United States. National Aeronautics and Space Administration
Other Authors:	Saxena, A. (Ashok), Cullers, Cheryl L. (Cheryl Lynne), 1967-
Format:	Government Document Book
Language:	English
Published:	[Washington, D.C.] : [National Aeronautics and Space Administration], [1992]
Series:	NASA contractor report ; NASA CR-191649.
Subjects:	Deformations (Mechanics) Nickel-aluminum alloys. Aircraft engines. Aluminum alloys. Brittleness. Ductility. Failure modes. Heat resistant alloys. High temperature. Nickel alloys. Temperature effects. Turbine blades. Turbine engines.
Online Access:	https://purl.fdlp.gov/GPO/LPS97375

Similar Items

High temperature dispersion strengthening of NiAl /
by: Sherman, Mark, et al.
Published: (1986)

Determination of the gaseous hydrogen ductile-brittle transition in copper-nickel alloys /
Published: (1985)

Anisotropy of high temperature strength in precipitation-hardened nickel-base superalloy single crystals /
Published: (1986)

The effectiveness of a NiCrY-coating on a powder metallurgy disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2018)

The Effect of hydrogen and microstructure on the deformation and fracture behavior of a single crystal nickel-base superalloy /
by: Walston, William S.
Published: (1990)

Atomistic simulations of Ti additions to NiAl /
by: Bozzolo, G. (Guillermo)
Published: (1997)

An introduction to the BFS method and its use to model binary NiAl alloys /
by: Bozzolo, G. (Guillermo)
Published: (1998)

10 000-hour cyclic oxidation behavior at 982 °C (1800 °F) of 68 high-temperature Co-, Fe-, and Ni-base alloys /
by: Barrett, Charles A.
Published: (1997)

Evaluation of Ti-48Al-2Cr-2Nb under fretting conditions /
Published: (2001)

Three-dimensional cellular structures enhanced by shape memory alloys /
by: Nathal, Michael V.
Published: (2014)

Macroscopic and microstructural aspects of the transformation behavior in a polycrystalline NiTi shape memory alloy /
by: Benafan, Othmane
Published: (2013)

Low temperature creep of hot-extruded near-stoichiometric NiTi shape memory alloy /
by: Raj, Sai V., et al.
Published: (2013)

Low-cost single-crystal turbine blades /
by: Strangman, T. E.
Published: (1984)

LCF life of as-deposited and annealed NiCr-Y coatings for oxidation and hot corrosion protection of disk alloys /
by: Nesbitt, J. A.
Published: (2019)

Effects of chromium and aluminum on mechanical and oxidation properties of iron-nickel-base superalloys based on CG-27 /
by: Schuon, Susan R.
Published: (1985)

Empirical study of the multiaxial, thermomechanical behavior of NiTiHf shape memory alloys /
by: Shukla, Dhwanil, et al.
Published: (2013)

Burst testing of a superalloy disk with a dual grain structure /
by: Gayda, John
Published: (2002)

Burst testing of a superalloy disk with a dual grain structure /
by: Gayda, John, et al.
Published: (2002)

The effect of various quenchants on the hardness and microstructure of 60-NITINOL /
by: Thomas, Fransua
Published: (2015)

Formation of minor phases in a nickel-based disk superalloy /
Published: (2012)

Constitutive modeling for isotropic materials (HOST) : third annual status report /
Published: (1986)

Quench crack behavior of nickel-base disk superalloys /
by: Gayda, John, et al.
Published: (2002)

Friction and wear of unlubricated NiTiHf with nitriding surface treatments /
by: Stanford, Malcolm Keith, 1970-
Published: (2018)

Viscoelastic response of the titanium alloy Ti-6-4 : experimental identification of time- and rate-dependent reversible and irreversible deformation regions /
by: Lerch, Bradley A., et al.
Published: (2014)

Constitutive modeling for isotropic materials (HOST) /
Published: (1984)

Effects of minor alloying additions on the microstructure, toughness, and creep strength of directionally solidified NiAl-31Cr-3Mo /
Published: (2001)

Static indentation load capacity of the superelastic 60NiTi for rolling element bearings /
by: DellaCorte, Christopher
Published: (2012)

Compositional effects on nickel-base superalloy single crystal microstructures /
by: MacKay, Rebecca A.
Published: (2012)

Effect of upper-cycle temperature on the load-biased, strain-temperature response of NiTi /
Published: (2011)

Fatigue life of a NiCr-coated powder metallurgy disk superalloy after varied processing and exposures /
by: Gabb, Timothy P.
Published: (2018)

Oxide scales formed on NiTi and NiPtTi shape memory alloys /
Published: (2011)

Effects of cobalt in nickel-base superalloys /
by: Tien, John K., et al.
Published: (1983)

Microstructural and material quality effects on rolling contact fatigue of highly elastic intermetallic NiTi ball bearings /
by: DellaCorte, Christopher
Published: (2017)

Tensile properties of weldments in alloy GTD 222 /
by: Miner, R. V., et al.
Published: (1996)

Dual microstructure heat treatment of a nickel-base disk alloy /
by: Gayda, John
Published: (2001)

The effect of indenter ball radius on the static load capacity of the superelastic 60NiTi for rolling element bearings /
by: DellaCorte, Christopher, et al.
Published: (2014)

Fatigue behavior of coated titanium alloys /
by: Zhu, Dongming, et al.
Published: (2019)

Nickel-titanium alloys : corrosion "proof" alloys for space bearing, components and mechanism applications /
by: DellaCorte, Christopher
Published: (2010)

Materials and structures research for gas turbine applications within the NASA subsonic fixed wing project /
by: Hurst, Janet
Published: (2011)

Anisotropic constitutive model for nickel base single crystal alloys : development and finite element implementation /
by: Dame, L. Thomas
Published: (1986)