Cover Image

Liquid flyback booster pre-phase A study assessment /

Bibliographic Details
Corporate Author:	United States. National Aeronautics and Space Administration
Other Authors:	Peterson, W.
Format:	Government Document Microform Book
Language:	English
Published:	[Washington, DC] : National Aeronautics and Space Administration, [1994]
Series:	NASA technical memorandum ; 104801.
Subjects:	Booster recovery. Cost analysis. Engine failure. Life cycle costs. Reusable launch vehicles. Solid propellant rocket engines. Space shuttle boosters. Space shuttles. Spacecraft launching.
Online Access:	Vol. 1 Vol. 2

Similar Items

Space shuttle program solid rocket booster decelerator subsystem : contractor's final report /
by: Barnard, James W.
Published: (1985)

The repair and return to flight of solid rocket booster forward skirt serial number 20022 /
by: Malone, T. W.
Published: (2008)

Test report for MSFC test #83-2 : pressure scaled water impact test of a 12.5 inch diameter model of the space shuttle solid rocket booster filament wound case and external TVC POD.
Published: (1983)

Ares I-X flight test vehicle modal test /
Published: (2010)

STS-78 space shuttle mission report /
by: Fricke, Robert W.
Published: (1996)

ASRM case insulation design and development /
by: Bell, Matthew S.
Published: (1992)

Ignition overpressure study from solid rocket motor firings /
by: Counter, Douglas D.
Published: (1987)

An evaluation of the total quality management implementation strategy for the advanced solid rocket motor project at NASA's Marshall Space Flight Center /
by: Schramm, Harry F.
Published: (1991)

Solid rocket booster thrust vector control subsystem description /
Published: (1983)

Atmospheric environment for space shuttle (STS-27) launch.
by: Jasper, G. L.
Published: (1989)

Space shuttle solid rocket booster main parachute damage reduction team report /
by: Watts, G. (Glenn)
Published: (1993)

Ares I-X flight test vehicle : stack 5 modal test /
Published: (2010)

Structural sizing of a 25 000-lb payload, air-breathing launch vehicle for single-state-to-orbit /
by: Roche, Joseph M., et al.
Published: (2001)

RSRM nozzle fixed housing cooldown test final report /
by: Bolieau, D. J.
Published: (1989)

STS-36 space shuttle mission report /
by: Mechelay, Joseph E., et al.
Published: (1990)

Space shuttle main engine structural analysis and data reduction/evaluation. final report /
by: Berry, David M., et al.
Published: (1989)

Atmospheric environment for space shuttle (STS-28) launch /
by: Jasper, G. L.
Published: (1990)

Solid rocket booster joint seal analyses /
by: Moore, Carleton J.
Published: (1987)

Hybrid propulsion technology program : final report.
Published: (1990)

Development of constraint force equation methodology for application to multi-body dynamics including launch vehicle stage separation /
by: Pamadi, Bandu N., 1945-
Published: (2016)

Flight motor set 360L007 (STS-33R), final report /
by: Garecht, Diane
Published: (1990)

Feasibility study and verified design concept for new improved hot gas facility : final report /
Published: (1986)

Block II solid rocket motor (SRM) conceptual design study : final report /
Published: (1986)

SRB thermal curtain design support : October 1990 interim report to U.S. Polymeric, B.P. Chemicals /
by: Lundblad, Wayne E.
Published: (1990)

Finite element simulation of a space shuttle solid rocket booster aft skirt splashdown using an arbitrary Lagrangian-Eulerian approach /
by: Melis, Matthew E.
Published: (2003)

Atmospheric environment for space shuttle (STS-26) launch /
by: Jasper, G. L.
Published: (1989)

Dynamic assessment of B-52B-008 carrier aircraft for the revised space shuttle solid rocket booster decelerator subsystem drop test vehicle.
by: Doty, Leslie J.
Published: (1983)

Field joint protection system rain qualification /
by: Cook, M.
Published: (1989)

Atmospheric environment for space shuttle (STS-51L) launch /
Published: (1987)

Qualification of improved joint heaters : final test report /
by: Cook, M.
Published: (1989)

Final study report for the space shuttle Ii advanced space transportation system /
Published: (1989)

QM-8 final performance evaluation report.
by: Nelsen, Lowell V.
Published: (1989)

Determination of acreage thermal protection foam loss from ice and foam impacts /
by: Carney, Kelly S. (Kelly Scott), et al.
Published: (2015)

Development of a shuttle plume radiation heating indicator : final report /
by: Reardon, John E.
Published: (1988)

Compendium of fracture mechanics problems /
by: Stallworth, R.
Published: (1990)

Space shuttle phase B wind tunnel model and test information.
by: Glynn, J. L.
Published: (1988)

Atmospheric environment for Space Shuttle (STS-9) launch /
by: Johnson, D. L. (Dale Leroy), et al.
Published: (1984)

Comparison of separation shock for explosive and nonexplosive release actuators on a small spacecraft panel /
by: Lucy, M. H., et al.
Published: (1996)

Space shuttle production verification motor 1 (PV-1) field joint protection system. final report /
by: Wilkinson, John P. (John Provost), 1927-
Published: (1990)

A review of the supply of liquid propellants and other fluids in support of the space shuttle program /
by: Churchwell, Stacy E.
Published: (1989)