Cover Image

A resistance strain gage with repeatable and cancellable apparent strain for use to 800⁰ C /

Bibliographic Details
Main Author:	Lei, Jih-Fen
Corporate Authors:	Sverdrup Technology, Inc, Lewis Research Center
Format:	Government Document Book
Language:	English
Published:	Brook Park, Ohio : Sverdrup Technology, inc. : National Aeronautics and Space Administration, Lewis Research Center, [1990]
Series:	NASA contractor report ; NASA CR-185256.
Subjects:	Strain gages. Chromium alloys. Coatings. Fabrication. Oxidation. Platinum.
Online Access:	https://purl.fdlp.gov/GPO/LPS69469

Similar Items

Development and characterization of PdCr temperature-compensated wire resistance strain gage /
by: Lei, Jih-Fen
Published: (1989)

Flame spray strain gages with improved durability and lifetimes /
by: Gregory, Otto
Published: (2003)

High temperature capacitive strain gage /
by: Wnuk, Stephen P.
Published: (1990)

Two-dimensional surface strain measurement based on a variation of Yamaguchi's laser-speckle strain gauge /
by: Barranger, John P.
Published: (1990)

Demonstration test of burner liner strain measuring system /
by: Stetson, Karl A.
Published: (1984)

Recommended strain gage application procedures for various Langley Research Center balances and test articles /
by: Moore, Thomas C.
Published: (1997)

Characteristics of Extrinsic Fabry-Perot Interferometric (EFPI) fiber-optic strain gages /
by: Hare, David A.
Published: (2000)

A conversion of Wheatstone bridge to current-loop signal conditioning for strain gages /
by: Anderson, Karl F.
Published: (1995)

A modified T-value method for selection of strain gages for measuring loads on a low aspect ratio wing /
by: Tang, Ming Han, 1939-, et al.
Published: (1980)

Fiber optic rosette strain gauge development and application on a large-scale composite structure /
by: Moore, Jason P.
Published: (2015)

A thin film multifunction sensor for harsh environments /
Published: (2001)

Advances in thin film sensor technologies for engine applications /
by: Lei, Jih-Fen, et al.
Published: (1997)

Evaluation of a strain-gage load calibration on a low-aspect-ratio wing structure at elevated temperature /
by: Reardon, Lawrence R.
Published: (1989)

Thermal output of WK-type strain gauges on various materials at cryogenic and elevated temperatures /
by: Kowalkowski, Matthew K., et al.
Published: (1998)

Back-face strain for monitoring stable crack extension in precracked flexure specimens /
by: Salem, J. A. (Jonathan A.), 1960-
Published: (2010)

Analysis of a six-component, flow-through, strain-gage, force balance used for hypersonic wind tunnel models with scramjet exhaust flow simulation /
by: Kniskern, Marc W.
Published: (1990)

Vapor generator wand /
Published: (1994)

LCF life of NiCr-Y coated disk alloys after shot peening, oxidation and hot corrosion /
by: Nesbitt, J. A.
Published: (2020)

Thin film sensors for surface measurements /
Published: (2001)

Measuring crack length in coarse grain ceramics /
by: Salem, Jonathan A.
Published: (2010)

Measurement of gear tooth dynamic friction /
by: Rebbechi, Brian, et al.
Published: (1996)

Strain rate dependent modeling of polymer matrix composites /
by: Goldberg, Robert K., et al.
Published: (1999)

Fiber optic strain sensor for planetary gear diagnostics /
Published: (2011)

Application of a fiber optic distributed strain sensor system to woven E-glass composite /
by: Anastasi, Robert F.
Published: (2001)

Fatigue life of a NiCr-coated powder metallurgy disk superalloy after varied processing and exposures /
by: Gabb, Timothy P.
Published: (2018)

Finite element analysis of a NASA National Transonic Facility wind tunnel balance /
by: Lindell, Michael C.
Published: (1996)

The strain gage primer /
by: Perry, Charles C.
Published: (1955)

The strain gage primer /
by: Perry, Charles C.
Published: (1962)

Strain rate dependent deformation and strength modeling of a polymer matrix composite utilizing a micromechanics approach /
by: Goldberg, Robert K.
Published: (1999)

High-strain-rate compression testing of ice /
by: Shazly, Mostafa
Published: (2006)

The evaluation of a modified chrome oxide based high temperature solid lubricant coating for foil gas bearings /
by: DellaCorte, Christopher
Published: (1998)

Uniaxial stretching of poly(keto-ether-imide) films /
by: Hinkley, Jeffrey A.
Published: (1999)

Earth strain measurements with the transportable laser ranging system : field techniques and planning /
by: Nakamura, Yosio, 1934-, et al.
Published: (1982)

Technology and practical use of strain gages : with particular consideration of stress analysis using strain gages /
by: Keil, Stefan
Published: (2017)

Wing shape sensing from measured strain /
by: Pak, Chan-gi
Published: (2015)

Strain gage techniques : fundamentals (July 16-20, 1956), applications (July 23-27, 1956) /
by: Murray, William M. (William MacGregor), 1910-, et al.
Published: (1956)

MS212-a homogeneous sputtered solid lubricant coating for use to 800 ÀC /
by: Sliney, Harold E., et al.
Published: (1997)

An evaluation of the fatigue crack growth and fracture toughness properties of beryllium-copper alloy CDA172 /
by: Forman, Royce G.
Published: (1990)

Viscoelastic response of the titanium alloy Ti-6-4 : experimental identification of time- and rate-dependent reversible and irreversible deformation regions /
by: Lerch, Bradley A., et al.
Published: (2014)

Tribological evaluation of PS300 : a new chrome oxide based solid lubricant coating sliding against A1₂O₃ from 25 to 650°C /
by: DellaCorte, Christopher, et al.
Published: (1996)