Cover Image

Shelf life extension for the lot AAE nozzle severance LSCs : final test report /

Bibliographic Details
Main Author:	Cook, M.
Corporate Authors:	Thiokol Corporation. Space Operations, George C. Marshall Space Flight Center
Format:	Government Document Book
Language:	English
Published:	Brigham City, UT : [Marshall Space Flight Center, Ala.] : Thiokol Corp., Space Operations ; [National Aeronautics and Space Administration, George C. Marshall Space Flight Center?], [1990]
Series:	NASA contractor report ; NASA CR-183878.
Subjects:	Exhaust nozzles. Rocket nozzles. Shaped charges. Solid propellant rocket engines. Storage stability.
Online Access:	https://purl.fdlp.gov/GPO/LPS70070

Similar Items

Decomposing solid micropropulsion nozzle performance issues /
by: Reed, Brian D.
Published: (2003)

A performance comparison of two small rocket nozzles /
by: Arrington, Lynn A., et al.
Published: (1996)

Development of a high power microwave thruster, with a magnetic nozzle, for space applications /
by: Power, John L.
Published: (1989)

Development of a high power microwave thruster, with a magnetic nozzle, for space applications /
by: Power, John L.
Published: (1989)

Conceptual design for a dual-bell rocket nozzle system using a NASA F-15 airplane as the flight testbed /
by: Jones, Daniel S.
Published: (2014)

Systems tunnel linear shaped charge lightning strike : final test report /
by: Cook, M.
Published: (1989)

Flow processes in overexpanded chemical rocket nozzles.
by: Schmucker, Robert H.
Published: (1984)

Effects of nozzle exit geometry and pressure ratio on plume shape for nozzles exhausting into quiescent air /
by: Scallion, W. I.
Published: (1991)

Multidisciplinary approach to aerospike nozzle design /
by: Korte, J. J.
Published: (1997)

Converging-diverging nozzle thruster code for nuclear or chemical rocket performance computations /
by: Juhasz, Albert J.
Published: (2019)

Static and dynamic deflection studies of the SRM aft case/nozzle joint /
by: Christian, David C.
Published: (1989)

Flight motor set 360L002 (STS-27R). final report /
by: Meyer, S. A.
Published: (1989)

Investigation of low-Reynolds-number rocket nozzle design using PNS-based optimization procedure /
by: Hussaini, M. Moin, et al.
Published: (1996)

RP-2 thermal stability and heat transfer investigation for hydrocarbon boost engines /
by: Van Noord, Jonathan
Published: (2010)

Analysis and design of optimized truncated scarfed nozzles subject to external flow effects /
by: Shyne, Rickey J.
Published: (1990)

Flow processes in overexpanded chemical rocket nozzles.
by: Schmucker, Robert H.
Published: (1984)

RSRM nozzle fixed housing cooldown test final report /
by: Bolieau, D. J.
Published: (1989)

Separate flow nozzle test status meeting : proceedings of a conference held at and sponsored by NASA Glenn Research Center, Cleveland, Ohio, September 9-10, 1997 /
Published: (2000)

Final postflight hardware evaluation report, 360T025 (RSRM-25, STS-46).
Published: (1993)

Exhaust nozzle plume effects on sonic boom test results for isolated nozzles /
by: Castner, Raymond S.
Published: (2011)

Methodology for three dimensional nozzle design /
by: Ferri, Aldo A., et al.
Published: (1974)

SRM propellant, friction/ESD testing /
by: Campbell, LaVere A.
Published: (1989)

Ignition overpressure study from solid rocket motor firings /
by: Counter, Douglas D.
Published: (1987)

Noise from aft deck exhaust nozzles : differences in experimental embodiments /
by: Bridges, James E.
Published: (2014)

Composite solid propellant predictability and quality assurance : meeting report, April 21, 1989 /
Published: (1989)

Space station hydrogen/oxygen thruster technology /
by: Briley, G. L.
Published: (1988)

Internal thrust and pumping performance of an auxiliary inlet ejector nozzle with clamshell thrust reverser /
by: Mansour, Ali H., et al.
Published: (1969)

Effects of sidewall geometry on the installed performance of nonaxisymmetric convergent-divergent exhaust nozzles /
by: Yetter, Jeffery A., et al.
Published: (1980)

ASRM case insulation design and development /
by: Bell, Matthew S.
Published: (1992)

SRB thermal curtain design support : October 1990 interim report to U.S. Polymeric, B.P. Chemicals /
by: Lundblad, Wayne E.
Published: (1990)

An experimental comparison of nonswirling and swirling flow in a circular-to-rectangular transition duct /
by: Reichert, Bruce A.
Published: (1991)

Aeropropulsive characteristics of isolated combined turbojet/ramjet nozzles at Mach numbers from 0 to 1.20 /
by: Carson, George T., et al.
Published: (1988)

Mach 5 electroformed nickel nozzle refurbishment : FNAS investigation of ultra-smooth surfaces /
by: Rood, Robert, et al.
Published: (1992)

Feasibility study and verified design concept for new improved hot gas facility : final report /
Published: (1986)

Effects of state recovery on creep buckling under variable loading /
by: Robinson, D. N., et al.
Published: (1986)

A review of the supply of liquid propellants and other fluids in support of the space shuttle program /
by: Churchwell, Stacy E.
Published: (1989)

A review of the supply of liquid propellants and other fluids in support of the space shuttle program /
by: Churchwell, Stacy E.
Published: (1989)

A survey of challenges in aerodynamic exhaust nozzle technology for aerospace propulsion applications /
by: Shyne, Rickey J.
Published: (2002)

A survey of challenges in aerodynamic exhaust nozzle technology for aerospace propulsion applications /
by: Shyne, Rickey J.
Published: (2002)

History of liquid propellant rocket engines /
by: Sutton, George P. (George Paul), 1920-
Published: (2006)