An investigation of gear mesh failure prediction techniques /

A new high-speed, high-cycle, gear-tooth bending fatigue test capability /
Published: (2011)

Advanced gear alloys for ultra high strength applications /
by: Shen, Tony, et al.
Published: (2011)

Investigation of gearbox vibration transmission paths on gear condition indicator performance /
by: Dempsey, Paula J.
Published: (2013)

Room temperature and elevated temperature composite sandwich joint testing /
by: Walker, S. P.
Published: (1998)

Relationship between unusual high-temperature fatigue crack growth threshold behavior in superalloys and sudden failure mode transitions /
by: Telesman, Jack
Published: (2017)

Fatigue failure of regenerator screens in a high frequency Stirling engine /
Published: (1987)

Engagement of metal debris into a gear mesh /
by: Handschuh, Robert F.
Published: (2010)

Computer programs to characterize alloys and predict cyclic life using the total strain version of strainrange partitioning : tutorial and users manual : version 1.0 /
by: Saltsman, James F.
Published: (1992)

Gearing /
by: Coy, John J.
Published: (1985)

Investigation of spiral bevel gear condition indicator validation via AC-29-2C using damage progression tests /
by: Dempsey, Paula J.
Published: (2014)

Threshold assessment of gear diagnostic tools on flight and test rig data /
by: Dempsey, Paula J.
Published: (2003)

Open hole and post-impact compression fatigue of stitched and unstitched carbon/epoxy composites /
by: Portanova, M. A. (Marc A.)
Published: (1990)

Predictive failure of cylindrical coatings using Weibull analysis /
by: Vlcek, Brian L.
Published: (2002)

Predictive failure of cylindrical coatings using Weibull analysis /
by: Vlcek, Brian L., et al.
Published: (2002)

NASA airframe structural integrity program /
by: Harris, Charles E.
Published: (1990)

Test population selection from Weibull-based, Monte Carlo simulations of fatigue life /
by: Vlcek, Brian L., et al.
Published: (2012)

Gear mesh loss-of-lubrication experiments and analytical simulation /
by: Handschuh, Robert F.
Published: (2011)

Characterization of failure processes in tungsten copper composites under fatigue loading conditions /
by: Kim, Yŏng-suk
Published: (1989)

Microprobe evaluations of grain boundary segregation in KM4 and IN100 /
by: Gabb, Timothy Paul, 1958-, et al.
Published: (2001)

Microprobe evaluations of grain boundary segregation in KM4 and IN100 /
by: Gabb, T. P.
Published: (2001)

Computerized generation and simulation of meshing of modified spur and helical gears manufactured by shaving /
Published: (2001)

Probabilistic simulation for combined cycle fatigue in composites /
by: Chamis, C. C. (Christos C.)
Published: (2010)

Fatigue damage growth mechanisms in continuous fiber reinforced titanium matrix composites /
by: Johnson, W. S. (W. Steven)
Published: (1990)

Current activities in standarization of high-temperature, low-cyle-fatigue testing techniques in the United States /
by: Verrilli, Michael J.
Published: (1990)

Resilient and corrosion-proof rolling element bearings made from superelastic Ni-Ti alloys for aerospace mechanism applications /
Published: (2011)

Factors influencing dwell fatigue cracking in notches of powder metallurgy superalloys /
Published: (2011)

Effects of temperature, thermal exposure, and fatigue on an alumina/aluminum composite /
by: Olsen, George C.
Published: (1980)

The effect of O₂, H₂O, and N₂ on the fatigue crack growth behavior of an α + β titanium alloy at 24C̊ and 177C̊ /
by: Smith, Stephen W.
Published: (2001)

Retention of compressive residual stresses introduced by shot peening in a powder metal disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2016)

Topology of modified helical gears /
Published: (1989)

Simplification of fatigue test requirements for damage tolerance of composite interstage launch vehicle hardware /
by: Nettles, A. T. (Alan T.)
Published: (2010)

High temperature fatigue behavior of a SiC/Ti-24Al-11Nb composite /
by: Bartolotta, Paul A.
Published: (1990)

Model verification and validation concepts for a probabilistic fracture assessment model to predict cracking of knife edge seals in the space shuttle main engine high pressure oxidizer /
by: Pai, Shantaram S., et al.
Published: (2013)

Lubricant effects on bearing life /
by: Zaretsky, Erwin V.
Published: (1986)

Isothermal fatigue mechanisms in Ti-based metal matrix composites /
by: Majumdar, Bhaskar S.
Published: (1993)

Modeling of crack bridging in a unidirectional metal matrix composite /
by: Ghosn, Louis J.
Published: (1991)