Cover Image

High temperature capacitive strain gage /

Bibliographic Details
Main Author:	Wnuk, Stephen P.
Corporate Author:	United States. National Aeronautics and Space Administration. Scientific and Technical Information Division
Other Authors:	Wnuk, S. P., Wnuk, V. P.
Format:	Government Document Microform Book
Language:	English
Published:	[Washington, D.C.] : National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division ; 1990.
Series:	NASA contractor report ; NASA CR-4266.
Subjects:	Capacitors. High temperature. Strain gages. Wind tunnel apparatus.
Online Access:	https://purl.fdlp.gov/GPO/LPS69254

Similar Items

Analysis of a six-component, flow-through, strain-gage, force balance used for hypersonic wind tunnel models with scramjet exhaust flow simulation /
by: Kniskern, Marc W.
Published: (1990)

Evaluation of a strain-gage load calibration on a low-aspect-ratio wing structure at elevated temperature /
by: Reardon, Lawrence R.
Published: (1989)

A resistance strain gage with repeatable and cancellable apparent strain for use to 800⁰ C /
by: Lei, Jih-Fen
Published: (1990)

Finite element analysis of a NASA National Transonic Facility wind tunnel balance /
by: Lindell, Michael C.
Published: (1996)

Recommended strain gage application procedures for various Langley Research Center balances and test articles /
by: Moore, Thomas C.
Published: (1997)

Development and characterization of PdCr temperature-compensated wire resistance strain gage /
by: Lei, Jih-Fen
Published: (1989)

Effect of high temperature storage on AC characteristics of polymer tantalum capacitors /
by: Teverovsky, Alexander A.
Published: (2021)

Vapor generator wand /
Published: (1994)

Advances in thin film sensor technologies for engine applications /
by: Lei, Jih-Fen, et al.
Published: (1997)

Flame spray strain gages with improved durability and lifetimes /
by: Gregory, Otto
Published: (2003)

Characteristics of Extrinsic Fabry-Perot Interferometric (EFPI) fiber-optic strain gages /
by: Hare, David A.
Published: (2000)

Two-dimensional surface strain measurement based on a variation of Yamaguchi's laser-speckle strain gauge /
by: Barranger, John P.
Published: (1990)

A conversion of Wheatstone bridge to current-loop signal conditioning for strain gages /
by: Anderson, Karl F.
Published: (1995)

Force instrumentation for cryogenic wind tunnels using one-piece strain-gage balances /
by: Ferris, Alice T.
Published: (1980)

Demonstration test of burner liner strain measuring system /
by: Stetson, Karl A.
Published: (1984)

A modified T-value method for selection of strain gages for measuring loads on a low aspect ratio wing /
by: Tang, Ming Han, 1939-, et al.
Published: (1980)

Fiber optic rosette strain gauge development and application on a large-scale composite structure /
by: Moore, Jason P.
Published: (2015)

Hostile environments and high temperature measurements : November 6-8, 1989, the Hyatt Regency Crown Center, Kansas City, Missouri, U.S.A.
Published: (1989)

An experimental device for generating high frequency perturbations in supersonic wind tunnels /
by: Melcher, Kevin J., et al.
Published: (1996)

High accuracy temperature measurements using RTD's with current loop conditioning /
by: Hill, Gerald M.
Published: (1997)

Thin film sensors for surface measurements /
Published: (2001)

Two-dimensional wind tunnel.
Published: (1982)

Finite-rate water condensation in combustion-heated wind tunnels /
by: Erickson, Wayne D.
Published: (1988)

De-icing of the altitude wind tunnel turning vanes by electro-magnetic impulse /
by: Zumwalt, G. W.
Published: (1986)

Modeling of high-strain-rate deformation, fracture, and impact behavior of advanced gas turbine engine materials at low and elevated temperatures /
by: Shazly, Mostafa
Published: (2003)

High-temperature modal survey of a hot-structure control surface /
by: Spivey, Natalie D.
Published: (2011)

Thermal output of WK-type strain gauges on various materials at cryogenic and elevated temperatures /
by: Kowalkowski, Matthew K., et al.
Published: (1998)

Low temperature characterization of ceramic and film power capacitors /
by: Hammoud, Ahmad N., et al.
Published: (1996)

Development of a large field of view shadowgraph system for a 16 ft. transonic wind tunnel /
by: Talley, Michael A., et al.
Published: (2000)

Design and calibration of the mixing layer and wind tunnel /
by: Bell, James H.
Published: (1989)

Capacitive acoustic wave detector and method of using same /
Published: (1994)

Back-face strain for monitoring stable crack extension in precracked flexure specimens /
by: Salem, J. A. (Jonathan A.), 1960-
Published: (2010)

Development and testing of an ultracapacitor based uninterruptible power supply (UPS) system /
by: Eichenberg, Dennis J.
Published: (2010)

The Langley 14- by 22-foot subsonic tunnel : description, flow characteristics, and guide for users /
Published: (1990)

Development of a large field of view shadowgraph system for a 16 ft. transonic wind tunnel /
by: Talley, Michael A.
Published: (2000)

Cryogenic pressure calibrator for wide temperature electronically scanned (ESP) pressure modules /
by: Faulcon, Nettie D.
Published: (2001)

Quantitative global heat transfer in a Mach-6 quiet tunnel /
by: Sullivan, John P.
Published: (2012)

Wall interference tests of a CAST 10-2/DOA 2 airfoil in an adaptive-wall test section /
by: Mineck, Raymond E.
Published: (1987)

Improvements to the total temperature calibration of the NASA Glenn Icing Research Tunnel /
by: Arrington, E. Allen
Published: (2005)

Experimental studies of transonic flow field near a longitudinally slotted wind tunnel wall /
by: Everhart, Joel L.
Published: (1994)