Evaluation of a metering, mixing, and dispensing system for mixing polysulfide adhesive : final report /

Copolyimides prepared from ODPA, BTDA, and 3,4-ODA /
Published: (1994)

Adaptive shape functions and internal mesh adaptation for modelling progressive failure in adhesively bonded joints /
by: Stapleton, Scott E.
Published: (2014)

Effects of tacky mat contamination on bond degradation for Chemlok/liner and NBR/liner bonds : final report /
by: Padilla, A. M.
Published: (1989)

Development of a qualification standard for adhesives used in hybrid microcircuits /
by: Licari, James J., 1930-
Published: (1981)

Comparison of adhesion and retention forces for two candidate docking seal elastomers /
Published: (2011)

Contamiantion [as printed] removal using various solvents and methodologas printed : final report.
by: Jeppsen, J. C.
Published: (1989)

The analysis of adhesively bonded advanced composite joints using joint finite elements /
by: Stapleton, Scott E., et al.
Published: (2012)

Method and apparatus for the quantification of particulate adhesion forces on various substrates /
by: Wohl, Christopher J.
Published: (2011)

Characterization of a thermoplastic polyimidesulfone /
by: Dezern, James F., et al.
Published: (1985)

A comparison of candidate seal designs for future docking systems /
by: Dunlap, Patrick H., et al.
Published: (2012)

Vacuum holding fixture and method for fabricating piezolectric poylmer acoustic sensors /
Published: (1994)

RSRM nozzle fixed housing cooldown test final report /
by: Bolieau, D. J.
Published: (1989)

An experimental investigation of silicone-to-metal bond strength in composite space docking system seals /
by: Conrad, Mason C.
Published: (2010)

Surface analysis and tools /
by: Miyoshi, Kazuhisa
Published: (2002)

Surface analysis and tools /
by: Miyoshi, Kazuhisa
Published: (2002)

Tests of the performance of coatings for low ice adhesion /
by: Anderson, David N., et al.
Published: (1997)

Effects of atomic oxygen and grease on outgassing and adhesion of silicone elastomers for space applications /
by: De Groh, Henry Charles
Published: (2012)

Extraction of thermal performance values from samples in the lunar dust adhesion bell jar /
by: Gaier, James R.
Published: (2010)

Fundamental tribological properties of ion-beam-deposited boron nitride films /
by: Miyoshi, Kazuhisa
Published: (1989)

Progressive damage analysis of bonded composite joints /
by: Leone, Frank A., et al.
Published: (2012)

Adhesion in a vacuum environment and its implications for dust mitigation techniques on airless bodies /
by: Berkebile, Stephen, et al.
Published: (2012)

Implications of adhesion studies for dust mitigation on thermal control surfaces /
by: Gaier, James R.
Published: (2012)

Thermal processing effects on the adhesive strength of PS304 high temperature solid lubricant coatings /
by: DellaCorte, Christopher
Published: (2001)

The effects of fiber orientation and adhesives on tensile properties of carbon fiber reinforced polymer matrix composite with embedded nickel-titanium shape memory alloys /
by: Quade, Derek J.
Published: (2017)

Synthesis of imide/arylene ether copolymers for adhesives and composite matrices /
by: Jensen, B. J.
Published: (1991)

Poly(arylene ether imidazole) surfacing films for flat and parabolic structures /
Published: (1994)

Sulfur impurities and the microstructure of alumina scales /
by: Smialek, James L.
Published: (1997)

Through-thickness tensile properties of triaxial braided composites /
by: Salem, J. A. (Jonathan A.), 1960-, et al.
Published: (2019)

Influence of thin-film adhesives in pullout tests between nickel-titanium shape memory alloy and carbon fiber-reinforced polymer matrix composites /
by: Quade, Derek J., et al.
Published: (2018)

The effects of molecular weight on the single lap shear creep and constant strain rate behavior of thermoplastic polyimidesulfone adhesive /
by: Dembosky, Stanley K.
Published: (1985)

The effects of molecular weight on the single lap shear creep and constant strain rate behavior of thermoplastic polyimidesulfone adhesive /
by: Dembosky, Stanley K.
Published: (1985)

Regolith activation on the Lunar surface and its ground test simulation /
by: Gaier, James R.
Published: (2009)

Fundamental tribological properties of ion-beam-deposited boron nitride films /
by: Miyoshi, Kazuhisa
Published: (1989)

Simplified design procedures for fiber composite structural components/joints /
by: Murthy, P. L. N.
Published: (1990)

Adhesion between volcanic glass and spacecraft materials in an airless body environment /
by: Berkebile, Stephen
Published: (2012)

Evaluation of surface modification as a lunar dust mitigation strategy for thermal control surfaces /
Published: (2011)