rdf-syntax-grammar
mods:
  schema location: http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
  title info:
    title: Identification of force coefficients in a squeeze film damper with a mechanical seal
  name:
    name part: Delgado-Marquez, Adolfo, 1979-
    role:
      role term: creator
  name:
    name part: San Andres, Luis A.
    role:
      role term: thesis advisor.
  type of resource: text
  genre: bibliography
  origin info:
    place:
      place term: txu
    date issued: 2006
    issuance: monographic
  language:
    language term: eng
  physical description:
    form: electronic
    form: remote
  abstract: Squeeze film dampers (SFDs) with low levels of external pressurization and poor end sealing are prone to air entrapment, thus reducing the damping capability. Furthermore, existing predictive models are too restrictive. Single frequency, unidirectional load and centered circular orbit experiments were conducted on a revamped SFD test rig. The damper journal is 1" in length and 5" in diameter, with nominal clearance of 5 mils (0.127 mm). The SFD feed end is flooded with oil, while the discharge end contains a recirculation groove and four orifice discharge ports to prevent air ingestion. The discharge end is fully sealed with a wave-spring that pushes a seal ring into contact with the SFD journal. The measurements conducted without and with lubricant in the squeeze film lands, along with a frequency domain identification procedure, render the mechanical seal dry-friction force and viscous damping force coefficients as functions of frequency and motion amplitude. The end seal arrangement is quite effective in eliminating side leakage and preventing air entrainment into the film lands. Importantly enough, the dry friction force, arising from the contact forces in relative motion, increases significantly the test element equivalent viscous damping coefficients. The identified system damping coefficients are thus frequency and amplitude of motion dependent, albeit decreasing rapidly as the motion parameters increase. Identified force coefficients, damping and added mass, for the squeeze film damper alone agree very well with predictions based on the full film, short length SFD model.
  note: by Adolfo Delgado-Marquez.
  note: "Major Subject: Mechanical Engineering"
  note: Title from author supplied metadata (automated record created on Apr. 14, 2006.)
  note: Vita.
  note: Abstract.
  note: Electronic resource.
  note: Mode of access: World Wide Web.
  note: System requirements: World Wide Web access and Adobe Acrobat Reader.
  note: M. S. Texas A&M University 2005.
  note: Includes bibliographical references.
  note: Text (Thesis).
  subject:
    topic: Major mechanical engineering
  subject:
    topic: Film
  subject:
    topic: Coefficients
  subject:
    topic: Squeeze
  subject:
    topic: Damper
  identifier: http://hdl.handle.net/1969.1/3224
  record info:
    record content source: TXA
    record creation date: 060426
    record change date: 20151103063548.0
    record identifier: in00002129718