Process development and fabrication of space station type aluminum-clad graphite epoxy struts /
| Main Author: | Ring, L. R. |
|---|---|
| Corporate Author: | Langley Research Center |
| Format: | Government Document Book |
| Language: | English |
| Published: |
Hampton, Va. :
National Aeronautics and Space Administration, Langley Research Center ;
[1990]
|
| Series: | NASA contractor report ;
NASA CR-181873. |
| Subjects: | |
| Online Access: | https://purl.fdlp.gov/GPO/LPS61884 |
Similar Items
Measurement of damping of graphite epoxy materials /
by: Crocker, Malcolm J.
Published: (1985)
by: Crocker, Malcolm J.
Published: (1985)
Structural testing of a stitched/resin film infused graphite-epoxy wing box /
by: Jegley, Dawn C., et al.
Published: (2001)
by: Jegley, Dawn C., et al.
Published: (2001)
Structural testing of a stitched/resin film infused graphite-epoxy wing box /
by: Jegley, Dawn C.
Published: (2001)
by: Jegley, Dawn C.
Published: (2001)
Mode II interlaminar fracture toughness and fatigue characterization of a graphite epoxy composite material /
by: O'Brien, T. Kevin
Published: (2010)
by: O'Brien, T. Kevin
Published: (2010)
Evaluation of long composite struts /
Published: (2011)
Published: (2011)
Adjusting measured weight loss of aged graphite fabric/PMR-15 composites /
by: Bowles, Kenneth J.
Published: (1998)
by: Bowles, Kenneth J.
Published: (1998)
Resistivity of pristine and intercalated graphite fiber epoxy composites /
by: Gaier, James R.
Published: (1990)
by: Gaier, James R.
Published: (1990)
Scaling effects in the static large defelction [as printed] response of graphite-epoxy composite beams /
by: Jackson, Karen E.
Published: (1989)
by: Jackson, Karen E.
Published: (1989)
Fabrication of lower section and upper forward bulkhead panels of the multi-bay box and panel preparation : final report /
by: Velicki, Alexander
Published: (2015)
by: Velicki, Alexander
Published: (2015)
The effect of resin toughness and modulus on compressive failure modes of quasi-isotropic graphite/epoxy laminates /
by: Sohi, Mohsen M.
Published: (1986)
by: Sohi, Mohsen M.
Published: (1986)
Abrasion behavior of aluminum and composite skin coupons, stiffened skins, and stiffened panels representative of transport airplane structures /
by: Jackson, Karen E.
Published: (1985)
by: Jackson, Karen E.
Published: (1985)
Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections /
by: Collins, J. Scott
Published: (1989)
by: Collins, J. Scott
Published: (1989)
A final report entitled payload vibration isolation in a microgravity environment /
by: Alexander, Richard M.
Published: (1990)
by: Alexander, Richard M.
Published: (1990)
Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections /
by: Collins, J. Scott
Published: (1990)
by: Collins, J. Scott
Published: (1990)
Buckling and postbuckling behavior of square compression-loaded graphite-epoxy plates with circular cutouts /
by: Nemeth, Michael P.
Published: (1990)
by: Nemeth, Michael P.
Published: (1990)
Analytical models for rotor test module, strut, and balance frame dynamics in the 40- by 80-ft wind tunnel /
by: Johnson, Wayne, 1946-
Published: (1976)
by: Johnson, Wayne, 1946-
Published: (1976)
Fatigue damage in notched composite laminates under tension-tension cyclic loads /
Published: (1985)
Published: (1985)
737 graphite composite flight spoiler flight service evaluation : eighth report /
by: Coggeshall, Randy L.
Published: (1985)
by: Coggeshall, Randy L.
Published: (1985)
Thermal output of WK-type strain gauges on various materials at cryogenic and elevated temperatures /
by: Kowalkowski, Matthew K., et al.
Published: (1998)
by: Kowalkowski, Matthew K., et al.
Published: (1998)
Prediction of composite laminate fracture : micromechanics and progressive fracture /
by: Gotsis, Pascal K., et al.
Published: (1996)
by: Gotsis, Pascal K., et al.
Published: (1996)
Relevance of impacter shape to nonvisible damage and residual tensile strength of a thick graphite/epoxy laminate /
by: Poe, C. C.
Published: (1990)
by: Poe, C. C.
Published: (1990)
Gravimetric measurements of materials outgassing applied to graphite-epoxy laminates /
by: Scialdone, John J.
Published: (1989)
by: Scialdone, John J.
Published: (1989)
Buckling behavior of long anisotropic plates subjected to combined loads /
by: Nemeth, Michael P.
Published: (1996)
by: Nemeth, Michael P.
Published: (1996)
Path planning for assembly of strut-based structures /
by: Munger, Rolf
Published: (1991)
by: Munger, Rolf
Published: (1991)
Material total mass loss in vacuum obtained from various outgassing systems /
by: Scialdone, John J.
Published: (2000)
by: Scialdone, John J.
Published: (2000)
Evaluation of microcracking in two carbon-fiber/epoxy-matrix composite cryogenic tanks /
by: Hodge, A. J.
by: Hodge, A. J.
Measurement of multiaxial ply strength by an off-axis flexure test /
by: Crews, John H.
Published: (1992)
by: Crews, John H.
Published: (1992)
A new look at numerical analyses of free-edge stresses in composite laminates /
by: Raju, I. S., et al.
Published: (1980)
by: Raju, I. S., et al.
Published: (1980)
Structural performance of space station trusses with missing members /
by: Dorsey, John T.
Published: (1986)
by: Dorsey, John T.
Published: (1986)
An examination of impact damage in glass/phenolic and aluminum honeycomb core composite panels /
by: Nettles, A. T. (Alan T.)
Published: (1990)
by: Nettles, A. T. (Alan T.)
Published: (1990)
Poly(arylene ether-co-imidazole)s as toughness modifiers for epoxy resins : patent application /
Published: (1994)
Published: (1994)
Investigation of paramagnetic response of metallic epoxies /
by: Ash, Robert L.
Published: (1986)
by: Ash, Robert L.
Published: (1986)
Design considerations for lightweight space radiators based on fabrication and test experience with a carbon-carbon composite prototype heat pipe /
by: Juhasz, Albert J.
Published: (2002)
by: Juhasz, Albert J.
Published: (2002)
Stacking-sequence optimization for buckling of laminated plates by integer programming /
by: Haftka, Raphael T.
Published: (1991)
by: Haftka, Raphael T.
Published: (1991)
Properties of two carbon composite materials using LTM25 epoxy resin /
by: Cross, John R., et al.
Published: (1996)
by: Cross, John R., et al.
Published: (1996)
Summary of a study to determine low-velocity impact damage and residual tension strength for a thick graphite/epoxy motor case /
by: Poe, C. C.
Published: (1990)
by: Poe, C. C.
Published: (1990)
Fracture behavior of a stitched warp-knit carbon fabric composite /
by: Poe, C. C.
Published: (2001)
by: Poe, C. C.
Published: (2001)
Delamination growth in composite materials /
Published: (1986)
Published: (1986)
Compression failure mechanisms of composite structures /
by: Hahn, H. Thomas, et al.
Published: (1986)
by: Hahn, H. Thomas, et al.
Published: (1986)
Damage-tolerance characteristics of composite fuselage sandwich structures with thick facesheets /
by: McGowan, David M., et al.
Published: (1997)
by: McGowan, David M., et al.
Published: (1997)